提交 3085de6a 编写于 作者: T Tzachi Perelstein 提交者: Russell King
上级 b11e9e02
obj-y += common.o addr-map.o pci.o gpio.o
obj-y += common.o addr-map.o pci.o gpio.o irq.o
......@@ -6,6 +6,7 @@
*/
void __init orion_map_io(void);
void __init orion_init_irq(void);
void __init orion_init(void);
/*
......
/*
* arch/arm/mach-orion/irq.c
*
* Core IRQ functions for Marvell Orion System On Chip
*
* Maintainer: Tzachi Perelstein <tzachi@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/gpio.h>
#include <asm/arch/orion.h>
#include "common.h"
/*****************************************************************************
* Orion GPIO IRQ
****************************************************************************/
static void orion_gpio_irq_mask(u32 irq)
{
int pin = irq_to_gpio(irq);
orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
}
static void orion_gpio_irq_unmask(u32 irq)
{
int pin = irq_to_gpio(irq);
orion_setbits(GPIO_LEVEL_MASK, 1 << pin);
}
static int orion_gpio_set_irq_type(u32 irq, u32 type)
{
int pin = irq_to_gpio(irq);
if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
printk(KERN_ERR "orion_gpio_set_irq_type failed "
"(irq %d, pin %d).\n", irq, pin);
return -EINVAL;
}
switch (type) {
case IRQT_HIGH:
orion_clrbits(GPIO_IN_POL, (1 << pin));
break;
case IRQT_LOW:
orion_setbits(GPIO_IN_POL, (1 << pin));
break;
default:
printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
return -EINVAL;
}
return 0;
}
static struct irq_chip orion_gpio_irq_chip = {
.name = "Orion-IRQ-GPIO",
.ack = orion_gpio_irq_mask,
.mask = orion_gpio_irq_mask,
.unmask = orion_gpio_irq_unmask,
.set_type = orion_gpio_set_irq_type,
};
static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int i;
u32 cause, shift;
BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31);
shift = (irq - IRQ_ORION_GPIO_0_7) * 8;
cause = orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_LEVEL_MASK);
cause &= (0xff << shift);
for (i = shift; i < shift + 8; i++) {
if (cause & (1 << i)) {
int gpio_irq = i + IRQ_ORION_GPIO_START;
if (gpio_irq > 0) {
desc = irq_desc + gpio_irq;
desc_handle_irq(gpio_irq, desc);
} else {
printk(KERN_ERR "orion_gpio_irq_handler error, "
"invalid irq %d\n", gpio_irq);
}
}
}
}
static void __init orion_init_gpio_irq(void)
{
int i;
/*
* Mask and clear GPIO IRQ interrupts
*/
orion_write(GPIO_LEVEL_MASK, 0x0);
orion_write(GPIO_EDGE_CAUSE, 0x0);
/*
* Register chained level handlers for GPIO IRQs
*/
for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) {
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler);
set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler);
set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler);
set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler);
}
/*****************************************************************************
* Orion Main IRQ
****************************************************************************/
static void orion_main_irq_mask(u32 irq)
{
orion_clrbits(MAIN_IRQ_MASK, 1 << irq);
}
static void orion_main_irq_unmask(u32 irq)
{
orion_setbits(MAIN_IRQ_MASK, 1 << irq);
}
static struct irq_chip orion_main_irq_chip = {
.name = "Orion-IRQ-Main",
.ack = orion_main_irq_mask,
.mask = orion_main_irq_mask,
.unmask = orion_main_irq_unmask,
};
static void __init orion_init_main_irq(void)
{
int i;
/*
* Mask and clear Main IRQ interrupts
*/
orion_write(MAIN_IRQ_MASK, 0x0);
orion_write(MAIN_IRQ_CAUSE, 0x0);
/*
* Register level handler for Main IRQs
*/
for (i = 0; i < IRQ_ORION_GPIO_START; i++) {
set_irq_chip(i, &orion_main_irq_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
}
void __init orion_init_irq(void)
{
orion_init_main_irq();
orion_init_gpio_irq();
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册