Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS

This is parallel to the existing P_DEFAULT_BOOT_SPI_CS, but in terms of
the GPIO value so it can be used with the normal gpio API.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

arch/blackfin/mach-bf518/include/mach/portmux.h

@@ -109,6 +109,7 @@
 #define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
 #define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG15
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 /* SPORT Port Mux */

arch/blackfin/mach-bf527/include/mach/portmux.h

@@ -79,6 +79,7 @@
 
 #define P_HWAIT		(P_DONTCARE)
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))

arch/blackfin/mach-bf533/include/mach/portmux.h

@@ -60,6 +60,7 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #define P_TMR2		(P_DONTCARE)

arch/blackfin/mach-bf537/include/mach/portmux.h

@@ -37,6 +37,7 @@
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
 #define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))

arch/blackfin/mach-bf538/include/mach/portmux.h

@@ -108,6 +108,7 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */

arch/blackfin/mach-bf548/include/mach/portmux.h

@@ -131,6 +131,7 @@
 #define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
 #define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
 #define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))

arch/blackfin/mach-bf561/include/mach/portmux.h

@@ -91,6 +91,7 @@
 #define P_SPI0_MOSI	(P_DONTCARE)
 #define P_SPI0_MISO	(P_DONTCARE)
 #define P_SPI0_SCK	(P_DONTCARE)
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */