ASoC: davinci: fix codec start and stop functions

According to DM365 voice codec data sheet at [1], before starting
recording or playback, ADC/DAC modules should follow a reset and
enable cycle. Writing a 1 to the ADC/DAC bit in the register resets
the module and clearing the bit to 0 will enable the module. But the
driver seems to be doing the reverse of it.

[1] http://focus.ti.com/lit/ug/sprufi9b/sprufi9b.pdfSigned-off-by: NRajashekhara, Sudhakar <sudhakar.raj@ti.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

sound/soc/davinci/davinci-vcif.c

@@ -62,9 +62,9 @@ static void davinci_vcif_start(struct snd_pcm_substream *substream)
 	w = readl(davinci_vc->base + DAVINCI_VC_CTRL);
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 1);
+		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 0);
 	else
-		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 1);
+		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 0);
 
 	writel(w, davinci_vc->base + DAVINCI_VC_CTRL);
 }
@@ -80,9 +80,9 @@ static void davinci_vcif_stop(struct snd_pcm_substream *substream)
 	/* Reset transmitter/receiver and sample rate/frame sync generators */
 	w = readl(davinci_vc->base + DAVINCI_VC_CTRL);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 0);
+		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTDAC, 1);
 	else
-		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 0);
+		MOD_REG_BIT(w, DAVINCI_VC_CTRL_RSTADC, 1);
 
 	writel(w, davinci_vc->base + DAVINCI_VC_CTRL);
 }