Documentation/gpu: split up mm, kms and kms-helpers from internals

Make the documents more manageable.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/be992e56eb8442d6e03b52444df5a42525085718.1466506505.git.jani.nikula@intel.com

Documentation/gpu/drm-kms-helpers.rst

+=============================
+Mode Setting Helper Functions
+=============================
+
+The plane, CRTC, encoder and connector functions provided by the drivers
+implement the DRM API. They're called by the DRM core and ioctl handlers
+to handle device state changes and configuration request. As
+implementing those functions often requires logic not specific to
+drivers, mid-layer helper functions are available to avoid duplicating
+boilerplate code.
+
+The DRM core contains one mid-layer implementation. The mid-layer
+provides implementations of several plane, CRTC, encoder and connector
+functions (called from the top of the mid-layer) that pre-process
+requests and call lower-level functions provided by the driver (at the
+bottom of the mid-layer). For instance, the
+:c:func:`drm_crtc_helper_set_config()` function can be used to
+fill the :c:type:`struct drm_crtc_funcs <drm_crtc_funcs>`
+set_config field. When called, it will split the set_config operation
+in smaller, simpler operations and call the driver to handle them.
+
+To use the mid-layer, drivers call
+:c:func:`drm_crtc_helper_add()`,
+:c:func:`drm_encoder_helper_add()` and
+:c:func:`drm_connector_helper_add()` functions to install their
+mid-layer bottom operations handlers, and fill the :c:type:`struct
+drm_crtc_funcs <drm_crtc_funcs>`, :c:type:`struct
+drm_encoder_funcs <drm_encoder_funcs>` and :c:type:`struct
+drm_connector_funcs <drm_connector_funcs>` structures with
+pointers to the mid-layer top API functions. Installing the mid-layer
+bottom operation handlers is best done right after registering the
+corresponding KMS object.
+
+The mid-layer is not split between CRTC, encoder and connector
+operations. To use it, a driver must provide bottom functions for all of
+the three KMS entities.
+
+Atomic Modeset Helper Functions Reference
+=========================================
+
+Overview
+--------
+
+.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
+   :doc: overview
+
+Implementing Asynchronous Atomic Commit
+---------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
+   :doc: implementing nonblocking commit
+
+Atomic State Reset and Initialization
+-------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
+   :doc: atomic state reset and initialization
+
+.. kernel-doc:: include/drm/drm_atomic_helper.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_atomic_helper.c
+   :export:
+
+Modeset Helper Reference for Common Vtables
+===========================================
+
+.. kernel-doc:: include/drm/drm_modeset_helper_vtables.h
+   :internal:
+
+.. kernel-doc:: include/drm/drm_modeset_helper_vtables.h
+   :doc: overview
+
+Legacy CRTC/Modeset Helper Functions Reference
+==============================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_crtc_helper.c
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/drm_crtc_helper.c
+   :doc: overview
+
+Output Probing Helper Functions Reference
+=========================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_probe_helper.c
+   :doc: output probing helper overview
+
+.. kernel-doc:: drivers/gpu/drm/drm_probe_helper.c
+   :export:
+
+fbdev Helper Functions Reference
+================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c
+   :doc: fbdev helpers
+
+.. kernel-doc:: drivers/gpu/drm/drm_fb_helper.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_fb_helper.h
+   :internal:
+
+Framebuffer CMA Helper Functions Reference
+==========================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_fb_cma_helper.c
+   :doc: framebuffer cma helper functions
+
+.. kernel-doc:: drivers/gpu/drm/drm_fb_cma_helper.c
+   :export:
+
+Display Port Helper Functions Reference
+=======================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_helper.c
+   :doc: dp helpers
+
+.. kernel-doc:: include/drm/drm_dp_helper.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_helper.c
+   :export:
+
+Display Port Dual Mode Adaptor Helper Functions Reference
+=========================================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_dual_mode_helper.c
+   :doc: dp dual mode helpers
+
+.. kernel-doc:: include/drm/drm_dp_dual_mode_helper.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_dual_mode_helper.c
+   :export:
+
+Display Port MST Helper Functions Reference
+===========================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_mst_topology.c
+   :doc: dp mst helper
+
+.. kernel-doc:: include/drm/drm_dp_mst_helper.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_dp_mst_topology.c
+   :export:
+
+MIPI DSI Helper Functions Reference
+===================================
+
+.. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c
+   :doc: dsi helpers
+
+.. kernel-doc:: include/drm/drm_mipi_dsi.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_mipi_dsi.c
+   :export:
+
+EDID Helper Functions Reference
+===============================
+
+.. kernel-doc:: drivers/gpu/drm/drm_edid.c
+   :export:
+
+Rectangle Utilities Reference
+=============================
+
+.. kernel-doc:: include/drm/drm_rect.h
+   :doc: rect utils
+
+.. kernel-doc:: include/drm/drm_rect.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_rect.c
+   :export:
+
+Flip-work Helper Reference
+==========================
+
+.. kernel-doc:: include/drm/drm_flip_work.h
+   :doc: flip utils
+
+.. kernel-doc:: include/drm/drm_flip_work.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_flip_work.c
+   :export:
+
+HDMI Infoframes Helper Reference
+================================
+
+Strictly speaking this is not a DRM helper library but generally useable
+by any driver interfacing with HDMI outputs like v4l or alsa drivers.
+But it nicely fits into the overall topic of mode setting helper
+libraries and hence is also included here.
+
+.. kernel-doc:: include/linux/hdmi.h
+   :internal:
+
+.. kernel-doc:: drivers/video/hdmi.c
+   :export:
+
+Plane Helper Reference
+======================
+
+.. kernel-doc:: drivers/gpu/drm/drm_plane_helper.c
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/drm_plane_helper.c
+   :doc: overview
+
+Tile group
+----------
+
+.. kernel-doc:: drivers/gpu/drm/drm_crtc.c
+   :doc: Tile group
+
+Bridges
+=======
+
+Overview
+--------
+
+.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
+   :doc: overview
+
+Default bridge callback sequence
+--------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
+   :doc: bridge callbacks
+
+.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
+   :export:
+
+Panel Helper Reference
+======================
+
+.. kernel-doc:: include/drm/drm_panel.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_panel.c
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/drm_panel.c
+   :doc: drm panel
+
+Simple KMS Helper Reference
+===========================
+
+.. kernel-doc:: include/drm/drm_simple_kms_helper.h
+   :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_simple_kms_helper.c
+   :export:
+
+.. kernel-doc:: drivers/gpu/drm/drm_simple_kms_helper.c
+   :doc: overview

Documentation/gpu/drm-mm.rst

+=====================
+DRM Memory Management
+=====================
+
+Modern Linux systems require large amount of graphics memory to store
+frame buffers, textures, vertices and other graphics-related data. Given
+the very dynamic nature of many of that data, managing graphics memory
+efficiently is thus crucial for the graphics stack and plays a central
+role in the DRM infrastructure.
+
+The DRM core includes two memory managers, namely Translation Table Maps
+(TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory
+manager to be developed and tried to be a one-size-fits-them all
+solution. It provides a single userspace API to accommodate the need of
+all hardware, supporting both Unified Memory Architecture (UMA) devices
+and devices with dedicated video RAM (i.e. most discrete video cards).
+This resulted in a large, complex piece of code that turned out to be
+hard to use for driver development.
+
+GEM started as an Intel-sponsored project in reaction to TTM's
+complexity. Its design philosophy is completely different: instead of
+providing a solution to every graphics memory-related problems, GEM
+identified common code between drivers and created a support library to
+share it. GEM has simpler initialization and execution requirements than
+TTM, but has no video RAM management capabilities and is thus limited to
+UMA devices.
+
+The Translation Table Manager (TTM)
+-----------------------------------
+
+TTM design background and information belongs here.
+
+TTM initialization
+~~~~~~~~~~~~~~~~~~
+
+    **Warning**
+
+    This section is outdated.
+
+Drivers wishing to support TTM must fill out a drm_bo_driver
+structure. The structure contains several fields with function pointers
+for initializing the TTM, allocating and freeing memory, waiting for
+command completion and fence synchronization, and memory migration. See
+the radeon_ttm.c file for an example of usage.
+
+The ttm_global_reference structure is made up of several fields:
+
+::
+
+              struct ttm_global_reference {
+                      enum ttm_global_types global_type;
+                      size_t size;
+                      void *object;
+                      int (*init) (struct ttm_global_reference *);
+                      void (*release) (struct ttm_global_reference *);
+              };
+
+
+There should be one global reference structure for your memory manager
+as a whole, and there will be others for each object created by the
+memory manager at runtime. Your global TTM should have a type of
+TTM_GLOBAL_TTM_MEM. The size field for the global object should be
+sizeof(struct ttm_mem_global), and the init and release hooks should
+point at your driver-specific init and release routines, which probably
+eventually call ttm_mem_global_init and ttm_mem_global_release,
+respectively.
+
+Once your global TTM accounting structure is set up and initialized by
+calling ttm_global_item_ref() on it, you need to create a buffer
+object TTM to provide a pool for buffer object allocation by clients and
+the kernel itself. The type of this object should be
+TTM_GLOBAL_TTM_BO, and its size should be sizeof(struct
+ttm_bo_global). Again, driver-specific init and release functions may
+be provided, likely eventually calling ttm_bo_global_init() and
+ttm_bo_global_release(), respectively. Also, like the previous
+object, ttm_global_item_ref() is used to create an initial reference
+count for the TTM, which will call your initialization function.
+
+The Graphics Execution Manager (GEM)
+------------------------------------
+
+The GEM design approach has resulted in a memory manager that doesn't
+provide full coverage of all (or even all common) use cases in its
+userspace or kernel API. GEM exposes a set of standard memory-related
+operations to userspace and a set of helper functions to drivers, and
+let drivers implement hardware-specific operations with their own
+private API.
+
+The GEM userspace API is described in the `GEM - the Graphics Execution
+Manager <http://lwn.net/Articles/283798/>`__ article on LWN. While
+slightly outdated, the document provides a good overview of the GEM API
+principles. Buffer allocation and read and write operations, described
+as part of the common GEM API, are currently implemented using
+driver-specific ioctls.
+
+GEM is data-agnostic. It manages abstract buffer objects without knowing
+what individual buffers contain. APIs that require knowledge of buffer
+contents or purpose, such as buffer allocation or synchronization
+primitives, are thus outside of the scope of GEM and must be implemented
+using driver-specific ioctls.
+
+On a fundamental level, GEM involves several operations:
+
+-  Memory allocation and freeing
+-  Command execution
+-  Aperture management at command execution time
+
+Buffer object allocation is relatively straightforward and largely
+provided by Linux's shmem layer, which provides memory to back each
+object.
+
+Device-specific operations, such as command execution, pinning, buffer
+read & write, mapping, and domain ownership transfers are left to
+driver-specific ioctls.
+
+GEM Initialization
+~~~~~~~~~~~~~~~~~~
+
+Drivers that use GEM must set the DRIVER_GEM bit in the struct
+:c:type:`struct drm_driver <drm_driver>` driver_features
+field. The DRM core will then automatically initialize the GEM core
+before calling the load operation. Behind the scene, this will create a
+DRM Memory Manager object which provides an address space pool for
+object allocation.
+
+In a KMS configuration, drivers need to allocate and initialize a
+command ring buffer following core GEM initialization if required by the
+hardware. UMA devices usually have what is called a "stolen" memory
+region, which provides space for the initial framebuffer and large,
+contiguous memory regions required by the device. This space is
+typically not managed by GEM, and must be initialized separately into
+its own DRM MM object.
+
+GEM Objects Creation
+~~~~~~~~~~~~~~~~~~~~
+
+GEM splits creation of GEM objects and allocation of the memory that
+backs them in two distinct operations.
+
+GEM objects are represented by an instance of struct :c:type:`struct
+drm_gem_object <drm_gem_object>`. Drivers usually need to
+extend GEM objects with private information and thus create a
+driver-specific GEM object structure type that embeds an instance of
+struct :c:type:`struct drm_gem_object <drm_gem_object>`.
+
+To create a GEM object, a driver allocates memory for an instance of its
+specific GEM object type and initializes the embedded struct
+:c:type:`struct drm_gem_object <drm_gem_object>` with a call
+to :c:func:`drm_gem_object_init()`. The function takes a pointer
+to the DRM device, a pointer to the GEM object and the buffer object
+size in bytes.
+
+GEM uses shmem to allocate anonymous pageable memory.
+:c:func:`drm_gem_object_init()` will create an shmfs file of the
+requested size and store it into the struct :c:type:`struct
+drm_gem_object <drm_gem_object>` filp field. The memory is
+used as either main storage for the object when the graphics hardware
+uses system memory directly or as a backing store otherwise.
+
+Drivers are responsible for the actual physical pages allocation by
+calling :c:func:`shmem_read_mapping_page_gfp()` for each page.
+Note that they can decide to allocate pages when initializing the GEM
+object, or to delay allocation until the memory is needed (for instance
+when a page fault occurs as a result of a userspace memory access or
+when the driver needs to start a DMA transfer involving the memory).
+
+Anonymous pageable memory allocation is not always desired, for instance
+when the hardware requires physically contiguous system memory as is
+often the case in embedded devices. Drivers can create GEM objects with
+no shmfs backing (called private GEM objects) by initializing them with
+a call to :c:func:`drm_gem_private_object_init()` instead of
+:c:func:`drm_gem_object_init()`. Storage for private GEM objects
+must be managed by drivers.
+
+GEM Objects Lifetime
+~~~~~~~~~~~~~~~~~~~~
+
+All GEM objects are reference-counted by the GEM core. References can be
+acquired and release by :c:func:`calling
+drm_gem_object_reference()` and
+:c:func:`drm_gem_object_unreference()` respectively. The caller
+must hold the :c:type:`struct drm_device <drm_device>`
+struct_mutex lock when calling
+:c:func:`drm_gem_object_reference()`. As a convenience, GEM
+provides :c:func:`drm_gem_object_unreference_unlocked()`
+functions that can be called without holding the lock.
+
+When the last reference to a GEM object is released the GEM core calls
+the :c:type:`struct drm_driver <drm_driver>` gem_free_object
+operation. That operation is mandatory for GEM-enabled drivers and must
+free the GEM object and all associated resources.
+
+void (\*gem_free_object) (struct drm_gem_object \*obj); Drivers are
+responsible for freeing all GEM object resources. This includes the
+resources created by the GEM core, which need to be released with
+:c:func:`drm_gem_object_release()`.
+
+GEM Objects Naming
+~~~~~~~~~~~~~~~~~~
+
+Communication between userspace and the kernel refers to GEM objects
+using local handles, global names or, more recently, file descriptors.
+All of those are 32-bit integer values; the usual Linux kernel limits
+apply to the file descriptors.
+
+GEM handles are local to a DRM file. Applications get a handle to a GEM
+object through a driver-specific ioctl, and can use that handle to refer
+to the GEM object in other standard or driver-specific ioctls. Closing a
+DRM file handle frees all its GEM handles and dereferences the
+associated GEM objects.
+
+To create a handle for a GEM object drivers call
+:c:func:`drm_gem_handle_create()`. The function takes a pointer
+to the DRM file and the GEM object and returns a locally unique handle.
+When the handle is no longer needed drivers delete it with a call to
+:c:func:`drm_gem_handle_delete()`. Finally the GEM object
+associated with a handle can be retrieved by a call to
+:c:func:`drm_gem_object_lookup()`.
+
+Handles don't take ownership of GEM objects, they only take a reference
+to the object that will be dropped when the handle is destroyed. To
+avoid leaking GEM objects, drivers must make sure they drop the
+reference(s) they own (such as the initial reference taken at object
+creation time) as appropriate, without any special consideration for the
+handle. For example, in the particular case of combined GEM object and
+handle creation in the implementation of the dumb_create operation,
+drivers must drop the initial reference to the GEM object before
+returning the handle.
+
+GEM names are similar in purpose to handles but are not local to DRM
+files. They can be passed between processes to reference a GEM object
+globally. Names can't be used directly to refer to objects in the DRM
+API, applications must convert handles to names and names to handles
+using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls
+respectively. The conversion is handled by the DRM core without any
+driver-specific support.
+
+GEM also supports buffer sharing with dma-buf file descriptors through
+PRIME. GEM-based drivers must use the provided helpers functions to
+implement the exporting and importing correctly. See ?. Since sharing
+file descriptors is inherently more secure than the easily guessable and
+global GEM names it is the preferred buffer sharing mechanism. Sharing
+buffers through GEM names is only supported for legacy userspace.
+Furthermore PRIME also allows cross-device buffer sharing since it is
+based on dma-bufs.
+
+GEM Objects Mapping
+~~~~~~~~~~~~~~~~~~~
+
+Because mapping operations are fairly heavyweight GEM favours
+read/write-like access to buffers, implemented through driver-specific
+ioctls, over mapping buffers to userspace. However, when random access
+to the buffer is needed (to perform software rendering for instance),
+direct access to the object can be more efficient.
+
+The mmap system call can't be used directly to map GEM objects, as they
+don't have their own file handle. Two alternative methods currently
+co-exist to map GEM objects to userspace. The first method uses a
+driver-specific ioctl to perform the mapping operation, calling
+:c:func:`do_mmap()` under the hood. This is often considered
+dubious, seems to be discouraged for new GEM-enabled drivers, and will
+thus not be described here.
+
+The second method uses the mmap system call on the DRM file handle. void
+\*mmap(void \*addr, size_t length, int prot, int flags, int fd, off_t
+offset); DRM identifies the GEM object to be mapped by a fake offset
+passed through the mmap offset argument. Prior to being mapped, a GEM
+object must thus be associated with a fake offset. To do so, drivers
+must call :c:func:`drm_gem_create_mmap_offset()` on the object.
+
+Once allocated, the fake offset value must be passed to the application
+in a driver-specific way and can then be used as the mmap offset
+argument.
+
+The GEM core provides a helper method :c:func:`drm_gem_mmap()` to
+handle object mapping. The method can be set directly as the mmap file
+operation handler. It will look up the GEM object based on the offset
+value and set the VMA operations to the :c:type:`struct drm_driver
+<drm_driver>` gem_vm_ops field. Note that
+:c:func:`drm_gem_mmap()` doesn't map memory to userspace, but
+relies on the driver-provided fault handler to map pages individually.
+
+To use :c:func:`drm_gem_mmap()`, drivers must fill the struct
+:c:type:`struct drm_driver <drm_driver>` gem_vm_ops field
+with a pointer to VM operations.
+
+struct vm_operations_struct \*gem_vm_ops struct
+vm_operations_struct { void (\*open)(struct vm_area_struct \* area);
+void (\*close)(struct vm_area_struct \* area); int (\*fault)(struct
+vm_area_struct \*vma, struct vm_fault \*vmf); };
+
+The open and close operations must update the GEM object reference
+count. Drivers can use the :c:func:`drm_gem_vm_open()` and
+:c:func:`drm_gem_vm_close()` helper functions directly as open
+and close handlers.
+
+The fault operation handler is responsible for mapping individual pages
+to userspace when a page fault occurs. Depending on the memory
+allocation scheme, drivers can allocate pages at fault time, or can
+decide to allocate memory for the GEM object at the time the object is
+created.
+
+Drivers that want to map the GEM object upfront instead of handling page
+faults can implement their own mmap file operation handler.
+
+Memory Coherency
+~~~~~~~~~~~~~~~~
+
+When mapped to the device or used in a command buffer, backing pages for
+an object are flushed to memory and marked write combined so as to be
+coherent with the GPU. Likewise, if the CPU accesses an object after the
+GPU has finished rendering to the object, then the object must be made
+coherent with the CPU's view of memory, usually involving GPU cache
+flushing of various kinds. This core CPU<->GPU coherency management is
+provided by a device-specific ioctl, which evaluates an object's current
+domain and performs any necessary flushing or synchronization to put the
+object into the desired coherency domain (note that the object may be
+busy, i.e. an active render target; in that case, setting the domain
+blocks the client and waits for rendering to complete before performing
+any necessary flushing operations).
+
+Command Execution
+~~~~~~~~~~~~~~~~~
+
+Perhaps the most important GEM function for GPU devices is providing a
+command execution interface to clients. Client programs construct
+command buffers containing references to previously allocated memory
+objects, and then submit them to GEM. At that point, GEM takes care to
+bind all the objects into the GTT, execute the buffer, and provide
+necessary synchronization between clients accessing the same buffers.
+This often involves evicting some objects from the GTT and re-binding
+others (a fairly expensive operation), and providing relocation support
+which hides fixed GTT offsets from clients. Clients must take care not
+to submit command buffers that reference more objects than can fit in
+the GTT; otherwise, GEM will reject them and no rendering will occur.
+Similarly, if several objects in the buffer require fence registers to
+be allocated for correct rendering (e.g. 2D blits on pre-965 chips),
+care must be taken not to require more fence registers than are
+available to the client. Such resource management should be abstracted
+from the client in libdrm.
+
+GEM Function Reference
+----------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_gem.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_gem.h
+   :internal:
+
+VMA Offset Manager
+------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_vma_manager.c
+   :doc: vma offset manager
+
+.. kernel-doc:: drivers/gpu/drm/drm_vma_manager.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_vma_manager.h
+   :internal:
+
+PRIME Buffer Sharing
+--------------------
+
+PRIME is the cross device buffer sharing framework in drm, originally
+created for the OPTIMUS range of multi-gpu platforms. To userspace PRIME
+buffers are dma-buf based file descriptors.
+
+Overview and Driver Interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Similar to GEM global names, PRIME file descriptors are also used to
+share buffer objects across processes. They offer additional security:
+as file descriptors must be explicitly sent over UNIX domain sockets to
+be shared between applications, they can't be guessed like the globally
+unique GEM names.
+
+Drivers that support the PRIME API must set the DRIVER_PRIME bit in the
+struct :c:type:`struct drm_driver <drm_driver>`
+driver_features field, and implement the prime_handle_to_fd and
+prime_fd_to_handle operations.
+
+int (\*prime_handle_to_fd)(struct drm_device \*dev, struct drm_file
+\*file_priv, uint32_t handle, uint32_t flags, int \*prime_fd); int
+(\*prime_fd_to_handle)(struct drm_device \*dev, struct drm_file
+\*file_priv, int prime_fd, uint32_t \*handle); Those two operations
+convert a handle to a PRIME file descriptor and vice versa. Drivers must
+use the kernel dma-buf buffer sharing framework to manage the PRIME file
+descriptors. Similar to the mode setting API PRIME is agnostic to the
+underlying buffer object manager, as long as handles are 32bit unsigned
+integers.
+
+While non-GEM drivers must implement the operations themselves, GEM
+drivers must use the :c:func:`drm_gem_prime_handle_to_fd()` and
+:c:func:`drm_gem_prime_fd_to_handle()` helper functions. Those
+helpers rely on the driver gem_prime_export and gem_prime_import
+operations to create a dma-buf instance from a GEM object (dma-buf
+exporter role) and to create a GEM object from a dma-buf instance
+(dma-buf importer role).
+
+struct dma_buf \* (\*gem_prime_export)(struct drm_device \*dev,
+struct drm_gem_object \*obj, int flags); struct drm_gem_object \*
+(\*gem_prime_import)(struct drm_device \*dev, struct dma_buf
+\*dma_buf); These two operations are mandatory for GEM drivers that
+support PRIME.
+
+PRIME Helper Functions
+~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/drm_prime.c
+   :doc: PRIME Helpers
+
+PRIME Function References
+-------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_prime.c
+   :export:
+
+DRM MM Range Allocator
+----------------------
+
+Overview
+~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/drm_mm.c
+   :doc: Overview
+
+LRU Scan/Eviction Support
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/gpu/drm/drm_mm.c
+   :doc: lru scan roaster
+
+DRM MM Range Allocator Function References
+------------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_mm.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_mm.h
+   :internal:
+
+CMA Helper Functions Reference
+------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c
+   :doc: cma helpers
+
+.. kernel-doc:: drivers/gpu/drm/drm_gem_cma_helper.c
+   :export:
+
+.. kernel-doc:: include/drm/drm_gem_cma_helper.h
+   :internal:

Documentation/gpu/index.rst

@@ -6,6 +6,9 @@ Linux GPU Driver Developer's Guide
 
    introduction
    drm-internals
+   drm-mm
+   drm-kms
+   drm-kms-helpers
    drm-uapi
    i915
    vga-switcheroo