Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 2f7dba9f 编写于 作者: F Finn Thain 提交者： Martin K. Petersen
浏览文件
操作

ncr5380: Eliminate PDEBUG*, TDEBUG* and DTCDEBUG* macros 

Replace {P,T,DTC}DEBUG_INIT with NDEBUG_INIT. Remove dead debugging
code, including code that's conditional upon *DEBUG_TRANSFER.
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 d5f7e65d
隐藏空白更改
内联 并排
Showing with 19 addition and 97 deletion
drivers/scsi/dtc.c
浏览文件 @ 2f7dba9f
......@@ -205,9 +205,8 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
addr = 0;
} else
for (; !addr && (current_base < NO_BASES); ++current_base) {
#if (DTCDEBUG & DTCDEBUG_INIT)
printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address);
#endif
dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n",
(unsigned int)bases[current_base].address);
if (bases[current_base].noauto)
continue;
base = ioremap(bases[current_base].address, 0x2000);
......@@ -216,18 +215,14 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
for (sig = 0; sig < NO_SIGNATURES; ++sig) {
if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) {
addr = bases[current_base].address;
#if (DTCDEBUG & DTCDEBUG_INIT)
printk(KERN_DEBUG "scsi-dtc : detected board.\n");
#endif
dprintk(NDEBUG_INIT, "dtc: detected board\n");
goto found;
}
}
iounmap(base);
}
#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr);
#endif
dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr);
if (!addr)
break;
......@@ -271,9 +266,8 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
instance->irq = NO_IRQ;
#endif
#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
instance->host_no, instance->irq);
++current_override;
++count;
......
drivers/scsi/dtc.h
浏览文件 @ 2f7dba9f
......@@ -10,10 +10,6 @@
#ifndef DTC3280_H
#define DTC3280_H
#define DTCDEBUG 0
#define DTCDEBUG_INIT 0x1
#define DTCDEBUG_TRANSFER 0x2
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
......@@ -33,31 +29,8 @@
#define DTC_address(reg) (base + DTC_5380_OFFSET + reg)
#define dbNCR5380_read(reg) \
(rval=readb(DTC_address(reg)), \
(((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\
, (reg), DTC_address(reg), rval)), rval ) )
#define dbNCR5380_write(reg, value) do { \
printk("DTC : write %02x to register %d at address %p\n", \
(value), (reg), DTC_address(reg)); \
writeb(value, DTC_address(reg));} while(0)
#if !(DTCDEBUG & DTCDEBUG_TRANSFER)
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
#else
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define xNCR5380_read(reg) \
(((unsigned char) printk("DTC : read register %d at address %p\n"\
, (reg), DTC_address(reg))), readb(DTC_address(reg)))
#define NCR5380_write(reg, value) do { \
printk("DTC : write %02x to register %d at address %p\n", \
(value), (reg), DTC_address(reg)); \
writeb(value, DTC_address(reg));} while(0)
#endif
#define NCR5380_intr dtc_intr
#define NCR5380_queue_command dtc_queue_command
......
drivers/scsi/pas16.c
浏览文件 @ 2f7dba9f
#define PSEUDO_DMA
#define UNSAFE /* Not unsafe for PAS16 -- use it */
#define PDEBUG 0
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
......@@ -377,23 +376,18 @@ static int __init pas16_detect(struct scsi_host_template *tpnt)
}
else
for (; !io_port && (current_base < NO_BASES); ++current_base) {
#if (PDEBUG & PDEBUG_INIT)
printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port);
#endif
dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n",
(unsigned int)bases[current_base].io_port);
if ( !bases[current_base].noauto &&
pas16_hw_detect( current_base ) ){
io_port = bases[current_base].io_port;
init_board( io_port, default_irqs[ current_base ], 0 );
#if (PDEBUG & PDEBUG_INIT)
printk("scsi-pas16 : detected board.\n");
#endif
dprintk(NDEBUG_INIT, "pas16: detected board\n");
}
}
#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port);
#endif
dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n",
(unsigned int)io_port);
if (!io_port)
break;
......@@ -431,9 +425,8 @@ static int __init pas16_detect(struct scsi_host_template *tpnt)
outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 );
}
#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
instance->host_no, instance->irq);
++current_override;
++count;
......
drivers/scsi/pas16.h
浏览文件 @ 2f7dba9f
......@@ -24,9 +24,6 @@
#ifndef PAS16_H
#define PAS16_H
#define PDEBUG_INIT 0x1
#define PDEBUG_TRANSFER 0x2
#define PAS16_DEFAULT_BASE_1 0x388
#define PAS16_DEFAULT_BASE_2 0x384
#define PAS16_DEFAULT_BASE_3 0x38c
......@@ -120,21 +117,8 @@
#define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] )
#if !(PDEBUG & PDEBUG_TRANSFER)
#define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
#else
#define NCR5380_read(reg) \
(((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\
, instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) \
(printk("scsi%d : write %02x to register %d at io_port %04x\n", \
instance->hostno, (value), (reg), PAS16_io_port(reg)), \
outb( (value),PAS16_io_port(reg) ) )
#endif
#define NCR5380_intr pas16_intr
#define do_NCR5380_intr do_pas16_intr
......
drivers/scsi/t128.c
浏览文件 @ 2f7dba9f
......@@ -182,9 +182,8 @@ static int __init t128_detect(struct scsi_host_template *tpnt)
base = 0;
} else
for (; !base && (current_base < NO_BASES); ++current_base) {
#if (TDEBUG & TDEBUG_INIT)
printk("scsi-t128 : probing address %08x\n", bases[current_base].address);
#endif
dprintk(NDEBUG_INIT, "t128: probing address 0x%08x\n",
bases[current_base].address);
if (bases[current_base].noauto)
continue;
p = ioremap(bases[current_base].address, 0x2000);
......@@ -195,17 +194,13 @@ static int __init t128_detect(struct scsi_host_template *tpnt)
signatures[sig].string,
strlen(signatures[sig].string))) {
base = bases[current_base].address;
#if (TDEBUG & TDEBUG_INIT)
printk("scsi-t128 : detected board.\n");
#endif
dprintk(NDEBUG_INIT, "t128: detected board\n");
goto found;
}
iounmap(p);
}
#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
printk("scsi-t128 : base = %08x\n", (unsigned int) base);
#endif
dprintk(NDEBUG_INIT, "t128: base = 0x%08x\n", (unsigned int)base);
if (!base)
break;
......@@ -242,9 +237,8 @@ static int __init t128_detect(struct scsi_host_template *tpnt)
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
dprintk(NDEBUG_INIT, "scsi%d: irq = %d\n",
instance->host_no, instance->irq);
++current_override;
++count;
......
drivers/scsi/t128.h
浏览文件 @ 2f7dba9f
......@@ -23,10 +23,6 @@
#ifndef T128_H
#define T128_H
#define TDEBUG 0
#define TDEBUG_INIT 0x1
#define TDEBUG_TRANSFER 0x2
/*
* The trantor boards are memory mapped. They use an NCR5380 or
* equivalent (my sample board had part second sourced from ZILOG).
......@@ -92,20 +88,8 @@
#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
#if !(TDEBUG & TDEBUG_TRANSFER)
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
#else
#define NCR5380_read(reg) \
(((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
, instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
#define NCR5380_write(reg, value) { \
printk("scsi%d : write %02x to register %d at address %08x\n", \
instance->hostno, (value), (reg), T128_address(reg)); \
writeb((value), (T128_address(reg))); \
}
#endif
#define NCR5380_intr t128_intr
#define do_NCR5380_intr do_t128_intr
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或