提交 2f6e24d3 编写于 作者: L Linus Torvalds

Merge tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Here is a collection of small fixes on top of the previous update.

  All small and obvious fixes. Mostly for usual suspects, USB-audio and
  HD-audio, but a few trivial error handling fixes for misc drivers as
  well"

* tag 'sound-fix-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Always create the interrupt pipe for the mixer
  ALSA: usb-audio: Add insertion control for UAC3 BADD
  ALSA: usb-audio: Change in connectors control creation interface
  ALSA: usb-audio: Add bi-directional terminal types
  ALSA: lx6464es: add error handling for pci_ioremap_bar
  ALSA: sonicvibes: add error handling for snd_ctl_add
  ALSA: usb-audio: Remove explicitly listed Mytek devices
  ALSA: usb-audio: Generic DSD detection for XMOS-based implementations
  ALSA: usb-audio: Add native DSD support for Mytek DACs
  ALSA: hda/realtek - Add shutup hint
  ALSA: usb-audio: Disable the quirk for Nura headset
  ALSA: hda: add dock and led support for HP ProBook 640 G4
  ALSA: hda: add dock and led support for HP EliteBook 830 G5
  ALSA: emu10k1: add error handling for snd_ctl_add
  ALSA: fm801: add error handling for snd_ctl_add
......@@ -230,6 +230,14 @@ struct uac1_output_terminal_descriptor {
#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
/* Terminals - 2.4 Bi-directional Terminal Types */
#define UAC_BIDIR_TERMINAL_UNDEFINED 0x400
#define UAC_BIDIR_TERMINAL_HANDSET 0x401
#define UAC_BIDIR_TERMINAL_HEADSET 0x402
#define UAC_BIDIR_TERMINAL_SPEAKER_PHONE 0x403
#define UAC_BIDIR_TERMINAL_ECHO_SUPPRESSING 0x404
#define UAC_BIDIR_TERMINAL_ECHO_CANCELING 0x405
/* Set bControlSize = 2 as default setting */
#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
......
......@@ -1858,7 +1858,9 @@ int snd_emu10k1_pcm_efx(struct snd_emu10k1 *emu, int device)
if (!kctl)
return -ENOMEM;
kctl->id.device = device;
snd_ctl_add(emu->card, kctl);
err = snd_ctl_add(emu->card, kctl);
if (err < 0)
return err;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), 64*1024, 64*1024);
......
......@@ -1068,11 +1068,19 @@ static int snd_fm801_mixer(struct fm801 *chip)
if ((err = snd_ac97_mixer(chip->ac97_bus, &ac97, &chip->ac97_sec)) < 0)
return err;
}
for (i = 0; i < FM801_CONTROLS; i++)
snd_ctl_add(chip->card, snd_ctl_new1(&snd_fm801_controls[i], chip));
for (i = 0; i < FM801_CONTROLS; i++) {
err = snd_ctl_add(chip->card,
snd_ctl_new1(&snd_fm801_controls[i], chip));
if (err < 0)
return err;
}
if (chip->multichannel) {
for (i = 0; i < FM801_CONTROLS_MULTI; i++)
snd_ctl_add(chip->card, snd_ctl_new1(&snd_fm801_controls_multi[i], chip));
for (i = 0; i < FM801_CONTROLS_MULTI; i++) {
err = snd_ctl_add(chip->card,
snd_ctl_new1(&snd_fm801_controls_multi[i], chip));
if (err < 0)
return err;
}
}
return 0;
}
......
......@@ -958,6 +958,8 @@ static const struct snd_pci_quirk cxt5066_fixups[] = {
SND_PCI_QUIRK(0x103c, 0x8079, "HP EliteBook 840 G3", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x807C, "HP EliteBook 820 G3", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x80FD, "HP ProBook 640 G2", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x83b3, "HP EliteBook 830 G5", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x83d3, "HP ProBook 640 G4", CXT_FIXUP_HP_DOCK),
SND_PCI_QUIRK(0x103c, 0x8174, "HP Spectre x360", CXT_FIXUP_HP_SPECTRE),
SND_PCI_QUIRK(0x103c, 0x8115, "HP Z1 Gen3", CXT_FIXUP_HP_GATE_MIC),
SND_PCI_QUIRK(0x103c, 0x814f, "HP ZBook 15u G3", CXT_FIXUP_MUTE_LED_GPIO),
......
......@@ -793,6 +793,9 @@ static inline void alc_shutup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
if (!snd_hda_get_bool_hint(codec, "shutup"))
return; /* disabled explicitly by hints */
if (spec && spec->shutup)
spec->shutup(codec);
else
......
......@@ -1016,6 +1016,10 @@ static int snd_lx6464es_create(struct snd_card *card,
/* dsp port */
chip->port_dsp_bar = pci_ioremap_bar(pci, 2);
if (!chip->port_dsp_bar) {
dev_err(card->dev, "cannot remap PCI memory region\n");
goto remap_pci_failed;
}
err = request_threaded_irq(pci->irq, lx_interrupt, lx_threaded_irq,
IRQF_SHARED, KBUILD_MODNAME, chip);
......@@ -1055,6 +1059,9 @@ static int snd_lx6464es_create(struct snd_card *card,
free_irq(pci->irq, chip);
request_irq_failed:
iounmap(chip->port_dsp_bar);
remap_pci_failed:
pci_release_regions(pci);
request_regions_failed:
......
......@@ -1188,6 +1188,7 @@ SONICVIBES_SINGLE("Joystick Speed", 0, SV_IREG_GAME_PORT, 1, 15, 0);
static int snd_sonicvibes_create_gameport(struct sonicvibes *sonic)
{
struct gameport *gp;
int err;
sonic->gameport = gp = gameport_allocate_port();
if (!gp) {
......@@ -1203,7 +1204,10 @@ static int snd_sonicvibes_create_gameport(struct sonicvibes *sonic)
gameport_register_port(gp);
snd_ctl_add(sonic->card, snd_ctl_new1(&snd_sonicvibes_game_control, sonic));
err = snd_ctl_add(sonic->card,
snd_ctl_new1(&snd_sonicvibes_game_control, sonic));
if (err < 0)
return err;
return 0;
}
......@@ -1515,7 +1519,11 @@ static int snd_sonic_probe(struct pci_dev *pci,
return err;
}
snd_sonicvibes_create_gameport(sonic);
err = snd_sonicvibes_create_gameport(sonic);
if (err < 0) {
snd_card_free(card);
return err;
}
if ((err = snd_card_register(card)) < 0) {
snd_card_free(card);
......
......@@ -32,6 +32,7 @@ struct audioformat {
struct snd_pcm_chmap_elem *chmap; /* (optional) channel map */
bool dsd_dop; /* add DOP headers in case of DSD samples */
bool dsd_bitrev; /* reverse the bits of each DSD sample */
bool dsd_raw; /* altsetting is raw DSD */
};
struct snd_usb_substream;
......
......@@ -64,8 +64,11 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
sample_width = fmt->bBitResolution;
sample_bytes = fmt->bSubslotSize;
if (format & UAC2_FORMAT_TYPE_I_RAW_DATA)
if (format & UAC2_FORMAT_TYPE_I_RAW_DATA) {
pcm_formats |= SNDRV_PCM_FMTBIT_SPECIAL;
/* flag potentially raw DSD capable altsettings */
fp->dsd_raw = true;
}
format <<= 1;
break;
......
......@@ -1653,11 +1653,11 @@ static void build_feature_ctl_badd(struct usb_mixer_interface *mixer,
NULL, NULL, unitid, 0, 0);
}
static void get_connector_control_name(struct mixer_build *state,
static void get_connector_control_name(struct usb_mixer_interface *mixer,
struct usb_audio_term *term,
bool is_input, char *name, int name_size)
{
int name_len = get_term_name(state->chip, term, name, name_size, 0);
int name_len = get_term_name(mixer->chip, term, name, name_size, 0);
if (name_len == 0)
strlcpy(name, "Unknown", name_size);
......@@ -1674,7 +1674,7 @@ static void get_connector_control_name(struct mixer_build *state,
}
/* Build a mixer control for a UAC connector control (jack-detect) */
static void build_connector_control(struct mixer_build *state,
static void build_connector_control(struct usb_mixer_interface *mixer,
struct usb_audio_term *term, bool is_input)
{
struct snd_kcontrol *kctl;
......@@ -1683,7 +1683,7 @@ static void build_connector_control(struct mixer_build *state,
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (!cval)
return;
snd_usb_mixer_elem_init_std(&cval->head, state->mixer, term->id);
snd_usb_mixer_elem_init_std(&cval->head, mixer, term->id);
/*
* UAC2: The first byte from reading the UAC2_TE_CONNECTOR control returns the
* number of channels connected.
......@@ -1694,7 +1694,7 @@ static void build_connector_control(struct mixer_build *state,
* This boolean ctl will simply report if any channels are connected
* or not.
*/
if (state->mixer->protocol == UAC_VERSION_2)
if (mixer->protocol == UAC_VERSION_2)
cval->control = UAC2_TE_CONNECTOR;
else /* UAC_VERSION_3 */
cval->control = UAC3_TE_INSERTION;
......@@ -1705,11 +1705,11 @@ static void build_connector_control(struct mixer_build *state,
cval->max = 1;
kctl = snd_ctl_new1(&usb_connector_ctl_ro, cval);
if (!kctl) {
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
usb_audio_err(mixer->chip, "cannot malloc kcontrol\n");
kfree(cval);
return;
}
get_connector_control_name(state, term, is_input, kctl->id.name,
get_connector_control_name(mixer, term, is_input, kctl->id.name,
sizeof(kctl->id.name));
kctl->private_free = snd_usb_mixer_elem_free;
snd_usb_mixer_add_control(&cval->head, kctl);
......@@ -2042,7 +2042,7 @@ static int parse_audio_input_terminal(struct mixer_build *state, int unitid,
/* Check for jack detection. */
if (uac_v2v3_control_is_readable(bmctls, control))
build_connector_control(state, &iterm, true);
build_connector_control(state->mixer, &iterm, true);
return 0;
}
......@@ -2918,6 +2918,23 @@ static int snd_usb_mixer_controls_badd(struct usb_mixer_interface *mixer,
UAC3_BADD_FU_ID7, map->map);
}
/* Insertion Control */
if (f->subclass == UAC3_FUNCTION_SUBCLASS_HEADSET_ADAPTER) {
struct usb_audio_term iterm, oterm;
/* Input Term - Insertion control */
memset(&iterm, 0, sizeof(iterm));
iterm.id = UAC3_BADD_IT_ID4;
iterm.type = UAC_BIDIR_TERMINAL_HEADSET;
build_connector_control(mixer, &iterm, true);
/* Output Term - Insertion control */
memset(&oterm, 0, sizeof(oterm));
oterm.id = UAC3_BADD_OT_ID3;
oterm.type = UAC_BIDIR_TERMINAL_HEADSET;
build_connector_control(mixer, &oterm, false);
}
return 0;
}
......@@ -2990,7 +3007,7 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
if (uac_v2v3_control_is_readable(le16_to_cpu(desc->bmControls),
UAC2_TE_CONNECTOR)) {
build_connector_control(&state, &state.oterm,
build_connector_control(state.mixer, &state.oterm,
false);
}
} else { /* UAC_VERSION_3 */
......@@ -3017,7 +3034,7 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
if (uac_v2v3_control_is_readable(le32_to_cpu(desc->bmControls),
UAC3_TE_INSERTION)) {
build_connector_control(&state, &state.oterm,
build_connector_control(state.mixer, &state.oterm,
false);
}
}
......@@ -3321,10 +3338,12 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
err = snd_usb_mixer_controls(mixer);
if (err < 0)
goto _error;
err = snd_usb_mixer_status_create(mixer);
if (err < 0)
goto _error;
}
err = snd_usb_mixer_status_create(mixer);
if (err < 0)
goto _error;
err = create_keep_iface_ctl(mixer);
if (err < 0)
goto _error;
......
......@@ -3277,6 +3277,10 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
}
},
/* disabled due to regression for other devices;
* see https://bugzilla.kernel.org/show_bug.cgi?id=199905
*/
#if 0
{
/*
* Nura's first gen headphones use Cambridge Silicon Radio's vendor
......@@ -3324,6 +3328,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
}
}
},
#endif /* disabled */
{
/*
......
......@@ -1362,16 +1362,12 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip,
case USB_ID(0x1511, 0x0037): /* AURALiC VEGA */
case USB_ID(0x20b1, 0x0002): /* Wyred 4 Sound DAC-2 DSD */
case USB_ID(0x20b1, 0x2004): /* Matrix Audio X-SPDIF 2 */
case USB_ID(0x20b1, 0x3008): /* iFi Audio micro/nano iDSD */
case USB_ID(0x20b1, 0x2008): /* Matrix Audio X-Sabre */
case USB_ID(0x20b1, 0x300a): /* Matrix Audio Mini-i Pro */
case USB_ID(0x22d9, 0x0416): /* OPPO HA-1 */
case USB_ID(0x22d9, 0x0436): /* OPPO Sonica */
case USB_ID(0x22d9, 0x0461): /* OPPO UDP-205 */
case USB_ID(0x2522, 0x0012): /* LH Labs VI DAC Infinity */
case USB_ID(0x25ce, 0x001f): /* Mytek Brooklyn DAC */
case USB_ID(0x25ce, 0x0021): /* Mytek Manhattan DAC */
case USB_ID(0x25ce, 0x8025): /* Mytek Brooklyn DAC+ */
case USB_ID(0x2772, 0x0230): /* Pro-Ject Pre Box S2 Digital */
if (fp->altsetting == 2)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
......@@ -1389,7 +1385,6 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip,
case USB_ID(0x20b1, 0x3021): /* Eastern El. MiniMax Tube DAC Supreme */
case USB_ID(0x20b1, 0x3023): /* Aune X1S 32BIT/384 DSD DAC */
case USB_ID(0x20b1, 0x302d): /* Unison Research Unico CD Due */
case USB_ID(0x20b1, 0x3036): /* Holo Springs Level 3 R2R DAC */
case USB_ID(0x20b1, 0x307b): /* CH Precision C1 DAC */
case USB_ID(0x20b1, 0x3086): /* Singxer F-1 converter board */
case USB_ID(0x22d9, 0x0426): /* OPPO HA-2 */
......@@ -1443,6 +1438,20 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip,
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
}
/* Mostly generic method to detect many DSD-capable implementations -
* from XMOS/Thesycon
*/
switch (USB_ID_VENDOR(chip->usb_id)) {
case 0x20b1: /* XMOS based devices */
case 0x25ce: /* Mytek devices */
if (fp->dsd_raw)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
default:
break;
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册