[ARM] 3866/1: AT91 clock update

This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-at91rm9200/at91rm9200.c

@@ -17,6 +17,7 @@
 
 #include <asm/hardware.h>
 #include "generic.h"
+#include "clock.h"
 
 static struct map_desc at91rm9200_io_desc[] __initdata = {
 	{
@@ -102,9 +103,160 @@ static struct map_desc at91rm9200_io_desc[] __initdata = {
 	},
 };
 
-void __init at91rm9200_map_io(void)
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ether_clk = {
+	.name		= "ether_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+	.name		= "spi_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+	.name		= "pioD_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioD_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc_clk,
+	&udc_clk,
+	&twi_clk,
+	&spi_clk,
+	// ssc 0 .. ssc2
+	// tc0 .. tc5
+	&ohci_clk,
+	&ether_clk,
+	// irq0 .. irq6
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91rm9200_register_clocks(void)
 {
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91RM9200 processor initialization
+ * -------------------------------------------------------------------- */
+void __init at91rm9200_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91rm9200_register_clocks();
 }
 
 /*

arch/arm/mach-at91rm9200/board-1arm.c

@@ -34,7 +34,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata onearm_uart_config = {
 
 static void __init onearm_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000);
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&onearm_uart_config);

arch/arm/mach-at91rm9200/board-carmeva.c

@@ -35,7 +35,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata carmeva_uart_config = {
 
 static void __init carmeva_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 20.000 MHz crystal */
-	at91_clock_init(20000000);
+	/* Initialize processor: 20.000 MHz crystal */
+	at91rm9200_initialize(20000000);
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&carmeva_uart_config);

arch/arm/mach-at91rm9200/board-csb337.c

@@ -34,7 +34,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata csb337_uart_config = {
 
 static void __init csb337_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 3.6864 MHz crystal */
-	at91_clock_init(3686400);
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);

arch/arm/mach-at91rm9200/board-csb637.c

@@ -33,7 +33,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -61,10 +60,8 @@ static struct at91_uart_config __initdata csb637_uart_config = {
 
 static void __init csb637_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 3.6864 MHz crystal */
-	at91_clock_init(3686400);
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);

arch/arm/mach-at91rm9200/board-dk.c

@@ -37,7 +37,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -65,10 +64,8 @@ static struct at91_uart_config __initdata dk_uart_config = {
 
 static void __init dk_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);

arch/arm/mach-at91rm9200/board-eb9200.c

@@ -35,7 +35,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata eb9200_uart_config = {
 
 static void __init eb9200_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000);
 
 	/* Setup the serial ports and console */
 	at91_init_serial(&eb9200_uart_config);

arch/arm/mach-at91rm9200/board-ek.c

@@ -37,7 +37,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -65,10 +64,8 @@ static struct at91_uart_config __initdata ek_uart_config = {
 
 static void __init ek_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);

arch/arm/mach-at91rm9200/board-kafa.c

@@ -34,7 +34,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -62,10 +61,8 @@ static struct at91_uart_config __initdata kafa_uart_config = {
 
 static void __init kafa_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 18.432 MHz crystal */
-	at91_clock_init(18432000);
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);

arch/arm/mach-at91rm9200/board-kb9202.c

@@ -35,7 +35,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 
@@ -63,10 +62,8 @@ static struct at91_uart_config __initdata kb9202_uart_config = {
 
 static void __init kb9202_map_io(void)
 {
-	at91rm9200_map_io();
-
-	/* Initialize clocks: 10 MHz crystal */
-	at91_clock_init(10000000);
+	/* Initialize processor: 10 MHz crystal */
+	at91rm9200_initialize(10000000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);

arch/arm/mach-at91rm9200/clock.c

@@ -29,7 +29,7 @@
 
 #include <asm/hardware.h>
 
-#include "generic.h"
+#include "clock.h"
 
 
 /*
@@ -38,23 +38,15 @@
  * PLLB be used at other rates (on boards that don't need USB), etc.
  */
 
-struct clk {
-	const char	*name;		/* unique clock name */
-	const char	*function;	/* function of the clock */
-	struct device	*dev;		/* device associated with function */
-	unsigned long	rate_hz;
-	struct clk	*parent;
-	u32		pmc_mask;
-	void		(*mode)(struct clk *, int);
-	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
-	unsigned	primary:1;
-	unsigned	pll:1;
-	unsigned	programmable:1;
-	u16		users;
-};
+#define clk_is_primary(x)	((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_programmable(x)	((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_peripheral(x)	((x)->type & CLK_TYPE_PERIPHERAL)
+
+
+static LIST_HEAD(clocks);
+static DEFINE_SPINLOCK(clk_lock);
 
-static spinlock_t	clk_lock;
-static u32		at91_pllb_usb_init;
+static u32 at91_pllb_usb_init;
 
 /*
  * Four primary clock sources:  two crystal oscillators (32K, main), and
@@ -67,21 +59,20 @@ static struct clk clk32k = {
 	.rate_hz	= AT91_SLOW_CLOCK,
 	.users		= 1,		/* always on */
 	.id		= 0,
-	.primary	= 1,
+	.type		= CLK_TYPE_PRIMARY,
 };
 static struct clk main_clk = {
 	.name		= "main",
 	.pmc_mask	= AT91_PMC_MOSCS,	/* in PMC_SR */
 	.id		= 1,
-	.primary	= 1,
+	.type		= CLK_TYPE_PRIMARY,
 };
 static struct clk plla = {
 	.name		= "plla",
 	.parent		= &main_clk,
 	.pmc_mask	= AT91_PMC_LOCKA,	/* in PMC_SR */
 	.id		= 2,
-	.primary	= 1,
-	.pll		= 1,
+	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
 };
 
 static void pllb_mode(struct clk *clk, int is_on)
@@ -94,6 +85,7 @@ static void pllb_mode(struct clk *clk, int is_on)
 	} else
 		value = 0;
 
+	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
 	at91_sys_write(AT91_CKGR_PLLBR, value);
 
 	do {
@@ -107,8 +99,7 @@ static struct clk pllb = {
 	.pmc_mask	= AT91_PMC_LOCKB,	/* in PMC_SR */
 	.mode		= pllb_mode,
 	.id		= 3,
-	.primary	= 1,
-	.pll		= 1,
+	.type		= CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
 };
 
 static void pmc_sys_mode(struct clk *clk, int is_on)
@@ -133,41 +124,6 @@ static struct clk uhpck = {
 	.mode		= pmc_sys_mode,
 };
 
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-/*
- * The four programmable clocks can be parented by any primary clock.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.mode		= pmc_sys_mode,
-	.programmable	= 1,
-	.id		= 3,
-};
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
 
 /*
  * The master clock is divided from the CPU clock (by 1-4).  It's used for
@@ -187,131 +143,21 @@ static void pmc_periph_mode(struct clk *clk, int is_on)
 		at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
 }
 
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_UDP,
-	.mode		= pmc_periph_mode,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_UHP,
-	.mode		= pmc_periph_mode,
-};
-static struct clk ether_clk = {
-	.name		= "ether_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_EMAC,
-	.mode		= pmc_periph_mode,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_MCI,
-	.mode		= pmc_periph_mode,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_TWI,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_US0,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_US1,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_US2,
-	.mode		= pmc_periph_mode,
-};
-static struct clk usart3_clk = {
-	.name		= "usart3_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_US3,
-	.mode		= pmc_periph_mode,
-};
-static struct clk spi_clk = {
-	.name		= "spi0_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_SPI,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOA,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOB,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOC,
-	.mode		= pmc_periph_mode,
-};
-static struct clk pioD_clk = {
-	.name		= "pioD_clk",
-	.parent		= &mck,
-	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
-	.mode		= pmc_periph_mode,
-};
-
-static struct clk *const clock_list[] = {
-	/* four primary clocks -- MUST BE FIRST! */
-	&clk32k,
-	&main_clk,
-	&plla,
-	&pllb,
-
-	/* PLLB children (USB) */
-	&udpck,
-	&uhpck,
-
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	/* programmable clocks */
-	&pck0,
-	&pck1,
-	&pck2,
-	&pck3,
-#endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
-
-	/* MCK and peripherals */
-	&mck,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&usart3_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi_clk,
-	&spi_clk,
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&pioD_clk,
-	// ssc0..ssc2
-	// tc0..tc5
-	// irq0..irq6
-	&ohci_clk,
-	&ether_clk,
-};
+static struct clk __init *at91_css_to_clk(unsigned long css)
+{
+	switch (css) {
+		case AT91_PMC_CSS_SLOW:
+			return &clk32k;
+		case AT91_PMC_CSS_MAIN:
+			return &main_clk;
+		case AT91_PMC_CSS_PLLA:
+			return &plla;
+		case AT91_PMC_CSS_PLLB:
+			return &pllb;
+	}
 
+	return NULL;
+}
 
 /*
  * Associate a particular clock with a function (eg, "uart") and device.
@@ -329,14 +175,12 @@ void __init at91_clock_associate(const char *id, struct device *dev, const char
 	clk->dev = dev;
 }
 
-/* clocks are all static for now; no refcounting necessary */
+/* clocks cannot be de-registered no refcounting necessary */
 struct clk *clk_get(struct device *dev, const char *id)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
-		struct clk *clk = clock_list[i];
+	struct clk *clk;
 
+	list_for_each_entry(clk, &clocks, node) {
 		if (strcmp(id, clk->name) == 0)
 			return clk;
 		if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
@@ -424,7 +268,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned	prescale;
 	unsigned long	actual;
 
-	if (!clk->programmable)
+	if (!clk_is_programmable(clk))
 		return -EINVAL;
 	spin_lock_irqsave(&clk_lock, flags);
 
@@ -446,7 +290,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	unsigned	prescale;
 	unsigned long	actual;
 
-	if (!clk->programmable)
+	if (!clk_is_programmable(clk))
 		return -EINVAL;
 	if (clk->users)
 		return -EBUSY;
@@ -484,7 +328,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 
 	if (clk->users)
 		return -EBUSY;
-	if (!parent->primary || !clk->programmable)
+	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
 		return -EINVAL;
 	spin_lock_irqsave(&clk_lock, flags);
 
@@ -497,6 +341,18 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 }
 EXPORT_SYMBOL(clk_set_parent);
 
+/* establish PCK0..PCK3 parentage and rate */
+static void init_programmable_clock(struct clk *clk)
+{
+	struct clk	*parent;
+	u32		pckr;
+
+	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
+	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+	clk->parent = parent;
+	clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
+}
+
 #endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
 
 /*------------------------------------------------------------------------*/
@@ -506,6 +362,7 @@ EXPORT_SYMBOL(clk_set_parent);
 static int at91_clk_show(struct seq_file *s, void *unused)
 {
 	u32		scsr, pcsr, sr;
+	struct clk	*clk;
 	unsigned	i;
 
 	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
@@ -523,9 +380,8 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 
 	seq_printf(s, "\n");
 
-	for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
-		char		*state;
-		struct clk	*clk = clock_list[i];
+	list_for_each_entry(clk, &clocks, node) {
+		char	*state;
 
 		if (clk->mode == pmc_sys_mode)
 			state = (scsr & clk->pmc_mask) ? "on" : "off";
@@ -568,6 +424,28 @@ postcore_initcall(at91_clk_debugfs_init);
 
 #endif
 
+/*------------------------------------------------------------------------*/
+
+/* Register a new clock */
+int __init clk_register(struct clk *clk)
+{
+	if (clk_is_peripheral(clk)) {
+		clk->parent = &mck;
+		clk->mode = pmc_periph_mode;
+		list_add_tail(&clk->node, &clocks);
+	}
+#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
+	else if (clk_is_programmable(clk)) {
+		clk->mode = pmc_sys_mode;
+		init_programmable_clock(clk);
+		list_add_tail(&clk->node, &clocks);
+	}
+#endif
+
+	return 0;
+}
+
+
 /*------------------------------------------------------------------------*/
 
 static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
@@ -640,20 +518,17 @@ static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
 	return 0;
 }
 
-
 /*
  * Several unused clocks may be active.  Turn them off.
  */
-static void at91_periphclk_reset(void)
+static void __init at91_periphclk_reset(void)
 {
 	unsigned long reg;
-	int i;
+	struct clk *clk;
 
 	reg = at91_sys_read(AT91_PMC_PCSR);
 
-	for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
-		struct clk	*clk = clock_list[i];
-
+	list_for_each_entry(clk, &clocks, node) {
 		if (clk->mode != pmc_periph_mode)
 			continue;
 
@@ -664,11 +539,25 @@ static void at91_periphclk_reset(void)
 	at91_sys_write(AT91_PMC_PCDR, reg);
 }
 
+static struct clk *const standard_pmc_clocks[] __initdata = {
+	/* four primary clocks */
+	&clk32k,
+	&main_clk,
+	&plla,
+	&pllb,
+
+	/* PLLB children (USB) */
+	&udpck,
+	&uhpck,
+
+	/* MCK */
+	&mck
+};
+
 int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
-
-	spin_lock_init(&clk_lock);
+	int i;
 
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
@@ -709,11 +598,15 @@ int __init at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = at91_sys_read(AT91_PMC_MCKR);
-	mck.parent = clock_list[mckr & AT91_PMC_CSS];
+	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
 	freq /= (1 << ((mckr >> 2) & 3));		/* prescale */
 	mck.rate_hz = freq / (1 + ((mckr >> 8) & 3));	/* mdiv */
 
+	/* Register the PMC's standard clocks */
+	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
+		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+
 	/* MCK and CPU clock are "always on" */
 	clk_enable(&mck);
 
@@ -722,35 +615,8 @@ int __init at91_clock_init(unsigned long main_clock)
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
-	/* establish PCK0..PCK3 parentage */
-	for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) {
-		struct clk	*clk = clock_list[tmp], *parent;
-		u32		pckr;
-
-		if (!clk->programmable)
-			continue;
-
-		pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-		parent = clock_list[pckr & AT91_PMC_CSS];
-		clk->parent = parent;
-		clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
-
-		if (clk->users == 0) {
-			/* not being used, so switch it off */
-			at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
-		}
-	}
-#else
 	/* disable all programmable clocks */
 	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
-#endif
-
-	/* enable the PIO clocks */
-	clk_enable(&pioA_clk);
-	clk_enable(&pioB_clk);
-	clk_enable(&pioC_clk);
-	clk_enable(&pioD_clk);
 
 	/* disable all other unused peripheral clocks */
 	at91_periphclk_reset();

arch/arm/mach-at91rm9200/clock.h

+/*
+ * linux/arch/arm/mach-at91rm9200/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define CLK_TYPE_PRIMARY	0x1
+#define CLK_TYPE_PLL		0x2
+#define CLK_TYPE_PROGRAMMABLE	0x4
+#define CLK_TYPE_PERIPHERAL	0x8
+
+
+struct clk {
+	struct list_head node;
+	const char	*name;		/* unique clock name */
+	const char	*function;	/* function of the clock */
+	struct device	*dev;		/* device associated with function */
+	unsigned long	rate_hz;
+	struct clk	*parent;
+	u32		pmc_mask;
+	void		(*mode)(struct clk *, int);
+	unsigned	id:2;		/* PCK0..3, or 32k/main/a/b */
+	unsigned	type;		/* clock type */
+	u16		users;
+};
+
+
+extern int __init clk_register(struct clk *clk);

arch/arm/mach-at91rm9200/generic.h

@@ -8,6 +8,9 @@
  * published by the Free Software Foundation.
  */
 
+ /* Processors */
+extern void __init at91rm9200_initialize(unsigned long main_clock);
+
  /* Interrupts */
 extern void __init at91rm9200_init_irq(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
@@ -17,9 +20,6 @@ extern void __init at91_gpio_irq_setup(unsigned banks);
 struct sys_timer;
 extern struct sys_timer at91rm9200_timer;
 
- /* Memory Map */
-extern void __init at91rm9200_map_io(void);
-
  /* Clocks */
 extern int __init at91_clock_init(unsigned long main_clock);
 struct device;