rt2x00: Implement HW encryption

Various rt2x00 devices support hardware encryption.

Most of them require the IV/EIV to be generated by mac80211,
but require it to be provided seperately instead of within
the frame itself. This means that rt2x00lib should extract
the data from the frame and place it in the frame descriptor.
During RX the IV/EIV is provided in the descriptor by the
hardware which means that it should be inserted into the
frame by rt2x00lib.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/Kconfig

@@ -33,6 +33,10 @@ config RT2X00_LIB_FIRMWARE
 	depends on RT2X00_LIB
 	select FW_LOADER
 
+config RT2X00_LIB_CRYPTO
+	boolean
+	depends on RT2X00_LIB
+
 config RT2X00_LIB_RFKILL
 	boolean
 	depends on RT2X00_LIB

drivers/net/wireless/rt2x00/Makefile

@@ -3,6 +3,7 @@ rt2x00lib-y				+= rt2x00mac.o
 rt2x00lib-y				+= rt2x00config.o
 rt2x00lib-y				+= rt2x00queue.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS)	+= rt2x00debug.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL)	+= rt2x00rfkill.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS)	+= rt2x00leds.o

drivers/net/wireless/rt2x00/rt2x00.h

@@ -451,6 +451,23 @@ struct rt2x00lib_erp {
 	int ack_consume_time;
 };
 
+/*
+ * Configuration structure for hardware encryption.
+ */
+struct rt2x00lib_crypto {
+	enum cipher cipher;
+
+	enum set_key_cmd cmd;
+	const u8 *address;
+
+	u32 bssidx;
+	u32 aid;
+
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+};
+
 /*
  * Configuration structure wrapper around the
  * rt2x00 interface configuration handler.
@@ -547,6 +564,12 @@ struct rt2x00lib_ops {
 	/*
 	 * Configuration handlers.
 	 */
+	int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
+				  struct rt2x00lib_crypto *crypto,
+				  struct ieee80211_key_conf *key);
+	int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
+				    struct rt2x00lib_crypto *crypto,
+				    struct ieee80211_key_conf *key);
 	void (*config_filter) (struct rt2x00_dev *rt2x00dev,
 			       const unsigned int filter_flags);
 	void (*config_intf) (struct rt2x00_dev *rt2x00dev,
@@ -609,7 +632,7 @@ enum rt2x00_flags {
 	DEVICE_DIRTY_CONFIG,
 
 	/*
-	 * Driver features
+	 * Driver requirements
 	 */
 	DRIVER_REQUIRE_FIRMWARE,
 	DRIVER_REQUIRE_BEACON_GUARD,
@@ -618,9 +641,14 @@ enum rt2x00_flags {
 	DRIVER_REQUIRE_DMA,
 
 	/*
-	 * Driver configuration
+	 * Driver features
 	 */
 	CONFIG_SUPPORT_HW_BUTTON,
+	CONFIG_SUPPORT_HW_CRYPTO,
+
+	/*
+	 * Driver configuration
+	 */
 	CONFIG_FRAME_TYPE,
 	CONFIG_RF_SEQUENCE,
 	CONFIG_EXTERNAL_LNA_A,
@@ -966,6 +994,13 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
 				unsigned int *total_flags,
 				int mc_count, struct dev_addr_list *mc_list);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		      const u8 *local_address, const u8 *address,
+		      struct ieee80211_key_conf *key);
+#else
+#define rt2x00mac_set_key	NULL
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats);
 int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,

drivers/net/wireless/rt2x00/rt2x00crypto.c

+/*
+	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00lib
+	Abstract: rt2x00 crypto specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+	switch (key->alg) {
+	case ALG_WEP:
+		if (key->keylen == LEN_WEP40)
+			return CIPHER_WEP64;
+		else
+			return CIPHER_WEP128;
+	case ALG_TKIP:
+		return CIPHER_TKIP;
+	case ALG_CCMP:
+		return CIPHER_AES;
+	default:
+		return CIPHER_NONE;
+	}
+}
+
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+	struct ieee80211_key_conf *key = tx_info->control.hw_key;
+	unsigned int overhead = 0;
+
+	/*
+	 * Extend frame length to include IV/EIV/ICV/MMIC,
+	 * note that these lengths should only be added when
+	 * mac80211 does not generate it.
+	 */
+	overhead += tx_info->control.icv_len;
+
+	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+		overhead += tx_info->control.iv_len;
+
+	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
+		if (key->alg == ALG_TKIP)
+			overhead += 8;
+	}
+
+	return overhead;
+}
+
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+
+	if (unlikely(!iv_len))
+		return;
+
+	/* Copy IV/EIV data */
+	if (iv_len >= 4)
+		memcpy(&skbdesc->iv, skb->data + header_length, 4);
+	if (iv_len >= 8)
+		memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4);
+
+	/* Move ieee80211 header */
+	memmove(skb->data + iv_len, skb->data, header_length);
+
+	/* Pull buffer to correct size */
+	skb_pull(skb, iv_len);
+
+	/* IV/EIV data has officially be stripped */
+	skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+	const unsigned int iv_len =
+	    ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4);
+
+	if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+		return;
+
+	skb_push(skb, iv_len);
+
+	/* Move ieee80211 header */
+	memmove(skb->data, skb->data + iv_len, header_length);
+
+	/* Copy IV/EIV data */
+	if (iv_len >= 4)
+		memcpy(skb->data + header_length, &skbdesc->iv, 4);
+	if (iv_len >= 8)
+		memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4);
+
+	/* IV/EIV data has returned into the frame */
+	skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+			       unsigned int header_length,
+			       struct rxdone_entry_desc *rxdesc)
+{
+	unsigned int payload_len = rxdesc->size - header_length;
+	unsigned int iv_len;
+	unsigned int icv_len;
+	unsigned int transfer = 0;
+
+	/*
+	 * WEP64/WEP128: Provides IV & ICV
+	 * TKIP: Provides IV/EIV & ICV
+	 * AES: Provies IV/EIV & ICV
+	 */
+	switch (rxdesc->cipher) {
+	case CIPHER_WEP64:
+	case CIPHER_WEP128:
+		iv_len = 4;
+		icv_len = 4;
+		break;
+	case CIPHER_TKIP:
+		iv_len = 8;
+		icv_len = 4;
+		break;
+	case CIPHER_AES:
+		iv_len = 8;
+		icv_len = 8;
+		break;
+	default:
+		/* Unsupport type */
+		return;
+	}
+
+	/*
+	 * Make room for new data, note that we increase both
+	 * headsize and tailsize when required. The tailsize is
+	 * only needed when ICV data needs to be inserted and
+	 * the padding is smaller then the ICV data.
+	 * When alignment requirements is greater then the
+	 * ICV data we must trim the skb to the correct size
+	 * because we need to remove the extra bytes.
+	 */
+	skb_push(skb, iv_len + align);
+	if (align < icv_len)
+		skb_put(skb, icv_len - align);
+	else if (align > icv_len)
+		skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+	/* Move ieee80211 header */
+	memmove(skb->data + transfer,
+		skb->data + transfer + iv_len + align,
+		header_length);
+	transfer += header_length;
+
+	/* Copy IV data */
+	if (iv_len >= 4) {
+		memcpy(skb->data + transfer, &rxdesc->iv, 4);
+		transfer += 4;
+	}
+
+	/* Copy EIV data */
+	if (iv_len >= 8) {
+		memcpy(skb->data + transfer, &rxdesc->eiv, 4);
+		transfer += 4;
+	}
+
+	/* Move payload */
+	if (align) {
+		memmove(skb->data + transfer,
+			skb->data + transfer + align,
+			payload_len);
+	}
+
+	/*
+	 * NOTE: Always count the payload as transfered,
+	 * even when alignment was set to zero. This is required
+	 * for determining the correct offset for the ICV data.
+	 */
+	transfer += payload_len;
+
+	/* Copy ICV data */
+	if (icv_len >= 4) {
+		memcpy(skb->data + transfer, &rxdesc->icv, 4);
+		/*
+		 * AES appends 8 bytes, we can't fill the upper
+		 * 4 bytes, but mac80211 doesn't care about what
+		 * we provide here anyway and strips it immediately.
+		 */
+		transfer += icv_len;
+	}
+
+	/* IV/EIV/ICV has been inserted into frame */
+	rxdesc->size = transfer;
+	rxdesc->flags &= ~RX_FLAG_IV_STRIPPED;
+}

drivers/net/wireless/rt2x00/rt2x00debug.c

@@ -35,6 +35,13 @@
 
 #define MAX_LINE_LENGTH 64
 
+struct rt2x00debug_crypto {
+	unsigned long success;
+	unsigned long icv_error;
+	unsigned long mic_error;
+	unsigned long key_error;
+};
+
 struct rt2x00debug_intf {
 	/*
 	 * Pointer to driver structure where
@@ -63,6 +70,7 @@ struct rt2x00debug_intf {
 	 *   - queue folder
 	 *     - frame dump file
 	 *     - queue stats file
+	 *     - crypto stats file
 	 */
 	struct dentry *driver_folder;
 	struct dentry *driver_entry;
@@ -80,6 +88,7 @@ struct rt2x00debug_intf {
 	struct dentry *queue_folder;
 	struct dentry *queue_frame_dump_entry;
 	struct dentry *queue_stats_entry;
+	struct dentry *crypto_stats_entry;
 
 	/*
 	 * The frame dump file only allows a single reader,
@@ -97,6 +106,12 @@ struct rt2x00debug_intf {
 	struct sk_buff_head frame_dump_skbqueue;
 	wait_queue_head_t frame_dump_waitqueue;
 
+	/*
+	 * HW crypto statistics.
+	 * All statistics are stored seperately per cipher type.
+	 */
+	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
+
 	/*
 	 * Driver and chipset files will use a data buffer
 	 * that has been created in advance. This will simplify
@@ -114,6 +129,25 @@ struct rt2x00debug_intf {
 	unsigned int offset_rf;
 };
 
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+			       enum cipher cipher, enum rx_crypto status)
+{
+	struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
+
+	if (cipher == CIPHER_TKIP_NO_MIC)
+		cipher = CIPHER_TKIP;
+	if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+		return;
+
+	/* Remove CIPHER_NONE index */
+	cipher--;
+
+	intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS);
+	intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV);
+	intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC);
+	intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY);
+}
+
 void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 			    enum rt2x00_dump_type type, struct sk_buff *skb)
 {
@@ -327,6 +361,59 @@ static const struct file_operations rt2x00debug_fop_queue_stats = {
 	.release	= rt2x00debug_file_release,
 };
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+static ssize_t rt2x00debug_read_crypto_stats(struct file *file,
+					     char __user *buf,
+					     size_t length,
+					     loff_t *offset)
+{
+	struct rt2x00debug_intf *intf = file->private_data;
+	char *name[] = { "WEP64", "WEP128", "TKIP", "AES" };
+	char *data;
+	char *temp;
+	size_t size;
+	unsigned int i;
+
+	if (*offset)
+		return 0;
+
+	data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	temp = data;
+	temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n");
+
+	for (i = 0; i < CIPHER_MAX; i++) {
+		temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i],
+				intf->crypto_stats[i].success,
+				intf->crypto_stats[i].icv_error,
+				intf->crypto_stats[i].mic_error,
+				intf->crypto_stats[i].key_error);
+	}
+
+	size = strlen(data);
+	size = min(size, length);
+
+	if (copy_to_user(buf, data, size)) {
+		kfree(data);
+		return -EFAULT;
+	}
+
+	kfree(data);
+
+	*offset += size;
+	return size;
+}
+
+static const struct file_operations rt2x00debug_fop_crypto_stats = {
+	.owner		= THIS_MODULE,
+	.read		= rt2x00debug_read_crypto_stats,
+	.open		= rt2x00debug_file_open,
+	.release	= rt2x00debug_file_release,
+};
+#endif
+
 #define RT2X00DEBUGFS_OPS_READ(__name, __format, __type)	\
 static ssize_t rt2x00debug_read_##__name(struct file *file,	\
 					 char __user *buf,	\
@@ -569,6 +656,13 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	    debugfs_create_file("queue", S_IRUSR, intf->queue_folder,
 				intf, &rt2x00debug_fop_queue_stats);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		intf->crypto_stats_entry =
+		    debugfs_create_file("crypto", S_IRUGO, intf->queue_folder,
+					intf, &rt2x00debug_fop_crypto_stats);
+#endif
+
 	return;
 
 exit:
@@ -587,6 +681,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
 
 	skb_queue_purge(&intf->frame_dump_skbqueue);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	debugfs_remove(intf->crypto_stats_entry);
+#endif
 	debugfs_remove(intf->queue_stats_entry);
 	debugfs_remove(intf->queue_frame_dump_entry);
 	debugfs_remove(intf->queue_folder);

drivers/net/wireless/rt2x00/rt2x00dev.c

@@ -507,6 +507,15 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 */
 	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 
+	/*
+	 * If the IV/EIV data was stripped from the frame before it was
+	 * passed to the hardware, we should now reinsert it again because
+	 * mac80211 will expect the the same data to be present it the
+	 * frame as it was passed to us.
+	 */
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		rt2x00crypto_tx_insert_iv(entry->skb);
+
 	/*
 	 * Send frame to debugfs immediately, after this call is completed
 	 * we are going to overwrite the skb->cb array.
@@ -585,7 +594,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_hdr *hdr;
 	const struct rt2x00_rate *rate;
-	unsigned int header_size;
+	unsigned int header_length;
 	unsigned int align;
 	unsigned int i;
 	int idx = -1;
@@ -613,10 +622,19 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
 	 */
-	header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
-	align = ((unsigned long)(entry->skb->data + header_size)) & 3;
+	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+	align = ((unsigned long)(entry->skb->data + header_length)) & 3;
 
-	if (align) {
+	/*
+	 * Hardware might have stripped the IV/EIV/ICV data,
+	 * in that case it is possible that the data was
+	 * provided seperately (through hardware descriptor)
+	 * in which case we should reinsert the data into the frame.
+	 */
+	if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
+		rt2x00crypto_rx_insert_iv(entry->skb, align,
+					  header_length, &rxdesc);
+	} else if (align) {
 		skb_push(entry->skb, align);
 		/* Move entire frame in 1 command */
 		memmove(entry->skb->data, entry->skb->data + align,
@@ -657,6 +675,10 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	    (rxdesc.dev_flags & RXDONE_MY_BSS))
 		rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi);
 
+	rt2x00debug_update_crypto(rt2x00dev,
+				  rxdesc.cipher,
+				  rxdesc.cipher_status);
+
 	rt2x00dev->link.qual.rx_success++;
 
 	rx_status->mactime = rxdesc.timestamp;

drivers/net/wireless/rt2x00/rt2x00lib.h

@@ -181,6 +181,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
 void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
 void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 			    enum rt2x00_dump_type type, struct sk_buff *skb);
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+			       enum cipher cipher, enum rx_crypto status);
 #else
 static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 {
@@ -195,8 +197,53 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 					  struct sk_buff *skb)
 {
 }
+
+static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+					     enum cipher cipher,
+					     enum rx_crypto status)
+{
+}
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
+/*
+ * Crypto handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+			       unsigned int header_length,
+			       struct rxdone_entry_desc *rxdesc);
+#else
+static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+	return CIPHER_NONE;
+}
+
+static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+	return 0;
+}
+
+static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+					     unsigned int iv_len)
+{
+}
+
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+}
+
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
+					     unsigned int align,
+					     unsigned int header_length,
+					     struct rxdone_entry_desc *rxdesc)
+{
+}
+#endif
+
 /*
  * RFkill handlers.
  */

drivers/net/wireless/rt2x00/rt2x00mac.c

@@ -36,22 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
 	struct ieee80211_tx_info *rts_info;
 	struct sk_buff *skb;
-	int size;
+	unsigned int data_length;
 	int retval = 0;
 
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
-		size = sizeof(struct ieee80211_cts);
+		data_length = sizeof(struct ieee80211_cts);
 	else
-		size = sizeof(struct ieee80211_rts);
+		data_length = sizeof(struct ieee80211_rts);
 
-	skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
+	skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
 	if (unlikely(!skb)) {
 		WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
 		return -ENOMEM;
 	}
 
 	skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
-	skb_put(skb, size);
+	skb_put(skb, data_length);
 
 	/*
 	 * Copy TX information over from original frame to
@@ -64,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	 */
 	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
 	rts_info = IEEE80211_SKB_CB(skb);
-	rts_info->control.hw_key = NULL;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
 	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -74,13 +73,24 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	else
 		rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
 
+	skb->do_not_encrypt = 1;
+
+	/*
+	 * RTS/CTS frame should use the length of the frame plus any
+	 * encryption overhead that will be added by the hardware.
+	 */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (!frag_skb->do_not_encrypt)
+		data_length += rt2x00crypto_tx_overhead(tx_info);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
 		ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
-					frag_skb->data, size, tx_info,
+					frag_skb->data, data_length, tx_info,
 					(struct ieee80211_cts *)(skb->data));
 	else
 		ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
-				  frag_skb->data, size, tx_info,
+				  frag_skb->data, data_length, tx_info,
 				  (struct ieee80211_rts *)(skb->data));
 
 	retval = rt2x00queue_write_tx_frame(queue, skb);
@@ -464,6 +474,90 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		      const u8 *local_address, const u8 *address,
+		      struct ieee80211_key_conf *key)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int (*set_key) (struct rt2x00_dev *rt2x00dev,
+			struct rt2x00lib_crypto *crypto,
+			struct ieee80211_key_conf *key);
+	struct rt2x00lib_crypto crypto;
+
+	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		return -EOPNOTSUPP;
+	else if (key->keylen > 32)
+		return -ENOSPC;
+
+	memset(&crypto, 0, sizeof(crypto));
+
+	/*
+	 * When in STA mode, bssidx is always 0 otherwise local_address[5]
+	 * contains the bss number, see BSS_ID_MASK comments for details.
+	 */
+	if (rt2x00dev->intf_sta_count)
+		crypto.bssidx = 0;
+	else
+		crypto.bssidx =
+		    local_address[5] & (rt2x00dev->ops->max_ap_intf - 1);
+
+	crypto.cipher = rt2x00crypto_key_to_cipher(key);
+	if (crypto.cipher == CIPHER_NONE)
+		return -EOPNOTSUPP;
+
+	crypto.cmd = cmd;
+	crypto.address = address;
+
+	if (crypto.cipher == CIPHER_TKIP) {
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
+			memcpy(&crypto.key,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
+			       sizeof(crypto.key));
+
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
+			memcpy(&crypto.tx_mic,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+			       sizeof(crypto.tx_mic));
+
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
+			memcpy(&crypto.rx_mic,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+			       sizeof(crypto.rx_mic));
+	} else
+		memcpy(&crypto.key, &key->key[0], key->keylen);
+
+	/*
+	 * Each BSS has a maximum of 4 shared keys.
+	 * Shared key index values:
+	 *	0) BSS0 key0
+	 *	1) BSS0 key1
+	 *	...
+	 *	4) BSS1 key0
+	 *	...
+	 *	8) BSS2 key0
+	 *	...
+	 * Both pairwise as shared key indeces are determined by
+	 * driver. This is required because the hardware requires
+	 * keys to be assigned in correct order (When key 1 is
+	 * provided but key 0 is not, then the key is not found
+	 * by the hardware during RX).
+	 */
+	key->hw_key_idx = 0;
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		set_key = rt2x00dev->ops->lib->config_pairwise_key;
+	else
+		set_key = rt2x00dev->ops->lib->config_shared_key;
+
+	if (!set_key)
+		return -EOPNOTSUPP;
+
+	return set_key(rt2x00dev, &crypto, key);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats)
 {

drivers/net/wireless/rt2x00/rt2x00queue.c

@@ -33,10 +33,11 @@
 struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
 					struct queue_entry *entry)
 {
-	unsigned int frame_size;
-	unsigned int reserved_size;
 	struct sk_buff *skb;
 	struct skb_frame_desc *skbdesc;
+	unsigned int frame_size;
+	unsigned int head_size = 0;
+	unsigned int tail_size = 0;
 
 	/*
 	 * The frame size includes descriptor size, because the
@@ -49,16 +50,32 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
 	 * this means we need at least 3 bytes for moving the frame
 	 * into the correct offset.
 	 */
-	reserved_size = 4;
+	head_size = 4;
+
+	/*
+	 * For IV/EIV/ICV assembly we must make sure there is
+	 * at least 8 bytes bytes available in headroom for IV/EIV
+	 * and 4 bytes for ICV data as tailroon.
+	 */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		head_size += 8;
+		tail_size += 4;
+	}
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
 
 	/*
 	 * Allocate skbuffer.
 	 */
-	skb = dev_alloc_skb(frame_size + reserved_size);
+	skb = dev_alloc_skb(frame_size + head_size + tail_size);
 	if (!skb)
 		return NULL;
 
-	skb_reserve(skb, reserved_size);
+	/*
+	 * Make sure we not have a frame with the requested bytes
+	 * available in the head and tail.
+	 */
+	skb_reserve(skb, head_size);
 	skb_put(skb, frame_size);
 
 	/*
@@ -140,7 +157,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	txdesc->cw_max = entry->queue->cw_max;
 	txdesc->aifs = entry->queue->aifs;
 
-	/* Data length should be extended with 4 bytes for CRC */
+	/* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */
 	data_length = entry->skb->len + 4;
 
 	/*
@@ -149,6 +166,35 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
 		__set_bit(ENTRY_TXD_ACK, &txdesc->flags);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) &&
+	    !entry->skb->do_not_encrypt) {
+		struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
+
+		__set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);
+
+		txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key);
+
+		if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+			__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
+
+		txdesc->key_idx = hw_key->hw_key_idx;
+		txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+		/*
+		 * Extend frame length to include all encryption overhead
+		 * that will be added by the hardware.
+		 */
+		data_length += rt2x00crypto_tx_overhead(tx_info);
+
+		if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+			__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
+
+		if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+			__set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags);
+	}
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 	/*
 	 * Check if this is a RTS/CTS frame
 	 */
@@ -305,6 +351,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
 	struct txentry_desc txdesc;
 	struct skb_frame_desc *skbdesc;
+	unsigned int iv_len = IEEE80211_SKB_CB(skb)->control.iv_len;
 
 	if (unlikely(rt2x00queue_full(queue)))
 		return -EINVAL;
@@ -326,15 +373,33 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	rt2x00queue_create_tx_descriptor(entry, &txdesc);
 
 	/*
-	 * skb->cb array is now ours and we are free to use it.
+	 * All information is retreived from the skb->cb array,
+	 * now we should claim ownership of the driver part of that
+	 * array.
 	 */
 	skbdesc = get_skb_frame_desc(entry->skb);
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->entry = entry;
 
+	/*
+	 * When hardware encryption is supported, and this frame
+	 * is to be encrypted, we should strip the IV/EIV data from
+	 * the frame so we can provide it to the driver seperately.
+	 */
+	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
+	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags))
+		rt2x00crypto_tx_remove_iv(skb, iv_len);
+
+	/*
+	 * It could be possible that the queue was corrupted and this
+	 * call failed. Just drop the frame, we cannot rollback and pass
+	 * the frame to mac80211 because the skb->cb has now been tainted.
+	 */
 	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
 		__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		return -EIO;
+		dev_kfree_skb_any(entry->skb);
+		entry->skb = NULL;
+		return 0;
 	}
 
 	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))

drivers/net/wireless/rt2x00/rt2x00queue.h

@@ -87,10 +87,13 @@ enum data_queue_qid {
  *
  * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
  * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
+ * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ *	mac80211 but was stripped for processing by the driver.
  */
 enum skb_frame_desc_flags {
-	SKBDESC_DMA_MAPPED_RX = (1 << 0),
-	SKBDESC_DMA_MAPPED_TX = (1 << 1),
+	SKBDESC_DMA_MAPPED_RX = 1 << 0,
+	SKBDESC_DMA_MAPPED_TX = 1 << 1,
+	FRAME_DESC_IV_STRIPPED = 1 << 2,
 };
 
 /**
@@ -104,6 +107,8 @@ enum skb_frame_desc_flags {
  * @desc: Pointer to descriptor part of the frame.
  *	Note that this pointer could point to something outside
  *	of the scope of the skb->data pointer.
+ * @iv: IV data used during encryption/decryption.
+ * @eiv: EIV data used during encryption/decryption.
  * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
  * @entry: The entry to which this sk buffer belongs.
  */
@@ -113,6 +118,9 @@ struct skb_frame_desc {
 	unsigned int desc_len;
 	void *desc;
 
+	__le32 iv;
+	__le32 eiv;
+
 	dma_addr_t skb_dma;
 
 	struct queue_entry *entry;
@@ -152,7 +160,11 @@ enum rxdone_entry_desc_flags {
  * @size: Data size of the received frame.
  * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
  * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
-
+ * @cipher: Cipher type used during decryption.
+ * @cipher_status: Decryption status.
+ * @iv: IV data used during decryption.
+ * @eiv: EIV data used during decryption.
+ * @icv: ICV data used during decryption.
  */
 struct rxdone_entry_desc {
 	u64 timestamp;
@@ -161,6 +173,12 @@ struct rxdone_entry_desc {
 	int size;
 	int flags;
 	int dev_flags;
+	u8 cipher;
+	u8 cipher_status;
+
+	__le32 iv;
+	__le32 eiv;
+	__le32 icv;
 };
 
 /**
@@ -206,6 +224,10 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_BURST: This frame belongs to the same burst event.
  * @ENTRY_TXD_ACK: An ACK is required for this frame.
  * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used.
+ * @ENTRY_TXD_ENCRYPT: This frame should be encrypted.
+ * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
+ * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
+ * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
  */
 enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
@@ -218,6 +240,10 @@ enum txentry_desc_flags {
 	ENTRY_TXD_BURST,
 	ENTRY_TXD_ACK,
 	ENTRY_TXD_RETRY_MODE,
+	ENTRY_TXD_ENCRYPT,
+	ENTRY_TXD_ENCRYPT_PAIRWISE,
+	ENTRY_TXD_ENCRYPT_IV,
+	ENTRY_TXD_ENCRYPT_MMIC,
 };
 
 /**
@@ -236,6 +262,9 @@ enum txentry_desc_flags {
  * @ifs: IFS value.
  * @cw_min: cwmin value.
  * @cw_max: cwmax value.
+ * @cipher: Cipher type used for encryption.
+ * @key_idx: Key index used for encryption.
+ * @iv_offset: Position where IV should be inserted by hardware.
  */
 struct txentry_desc {
 	unsigned long flags;
@@ -252,6 +281,10 @@ struct txentry_desc {
 	short ifs;
 	short cw_min;
 	short cw_max;
+
+	enum cipher cipher;
+	u16 key_idx;
+	u16 iv_offset;
 };
 
 /**
@@ -484,25 +517,51 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 }
 
 /**
- * rt2x00_desc_read - Read a word from the hardware descriptor.
+ * _rt2x00_desc_read - Read a word from the hardware descriptor.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be read.
+ * @value: Address where the descriptor value should be written into.
+ */
+static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value)
+{
+	*value = desc[word];
+}
+
+/**
+ * rt2x00_desc_read - Read a word from the hardware descriptor, this
+ * function will take care of the byte ordering.
  * @desc: Base descriptor address
  * @word: Word index from where the descriptor should be read.
  * @value: Address where the descriptor value should be written into.
  */
 static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value)
 {
-	*value = le32_to_cpu(desc[word]);
+	__le32 tmp;
+	_rt2x00_desc_read(desc, word, &tmp);
+	*value = le32_to_cpu(tmp);
+}
+
+/**
+ * rt2x00_desc_write - write a word to the hardware descriptor, this
+ * function will take care of the byte ordering.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be written.
+ * @value: Value that should be written into the descriptor.
+ */
+static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value)
+{
+	desc[word] = value;
 }
 
 /**
- * rt2x00_desc_write - wrote a word to the hardware descriptor.
+ * rt2x00_desc_write - write a word to the hardware descriptor.
  * @desc: Base descriptor address
  * @word: Word index from where the descriptor should be written.
  * @value: Value that should be written into the descriptor.
  */
 static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value)
 {
-	desc[word] = cpu_to_le32(value);
+	_rt2x00_desc_write(desc, word, cpu_to_le32(value));
 }
 
 #endif /* RT2X00QUEUE_H */

drivers/net/wireless/rt2x00/rt2x00reg.h

@@ -26,6 +26,16 @@
 #ifndef RT2X00REG_H
 #define RT2X00REG_H
 
+/*
+ * RX crypto status
+ */
+enum rx_crypto {
+	RX_CRYPTO_SUCCESS = 0,
+	RX_CRYPTO_FAIL_ICV = 1,
+	RX_CRYPTO_FAIL_MIC = 2,
+	RX_CRYPTO_FAIL_KEY = 3,
+};
+
 /*
  * Antenna values
  */
@@ -104,7 +114,14 @@ enum cipher {
  */
 	CIPHER_CKIP64 = 5,
 	CIPHER_CKIP128 = 6,
-	CIPHER_TKIP_NO_MIC = 7,
+	CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */
+
+/*
+ * Max cipher type.
+ * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128
+ * are excluded due to limitations in mac80211.
+ */
+	CIPHER_MAX = 4,
 };
 
 /*