Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 29fda25a 编写于 作者: D David S. Miller
浏览文件
操作

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 

Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 bb1182bc bc78d646
展开全部 隐藏空白更改
内联 并排
Showing with 11723 addition and 5156 deletion
Documentation/device-mapper/dm-raid.txt
浏览文件 @ 29fda25a
......@@ -343,3 +343,4 @@ Version History
1.11.0 Fix table line argument order
(wrong raid10_copies/raid10_format sequence)
1.11.1 Add raid4/5/6 journal write-back support via journal_mode option
1.12.1 fix for MD deadlock between mddev_suspend() and md_write_start() available
Documentation/devicetree/bindings/ata/sata_rcar.txt
浏览文件 @ 29fda25a
* Renesas R-Car SATA
Required properties:
- compatible : should contain one of the following:
- compatible : should contain one or more of the following:
- "renesas,sata-r8a7779" for R-Car H1
("renesas,rcar-sata" is deprecated)
- "renesas,sata-r8a7790-es1" for R-Car H2 ES1
- "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2-W
- "renesas,sata-r8a7793" for R-Car M2-N
- "renesas,sata-r8a7795" for R-Car H3
- "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
- "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
- "renesas,rcar-sata" is deprecated
When compatible with the generic version nodes
must list the SoC-specific version corresponding
to the platform first followed by the generic
version.
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
- clocks : must contain a reference to the functional clock.
......@@ -16,7 +24,7 @@ Required properties:
Example:
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791";
compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
reg = <0 0xee300000 0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
......
Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt
浏览文件 @ 29fda25a
......@@ -8,7 +8,6 @@ Required properties:
Optional properties:
- clocks: Reference to the crypto engine clock.
- dma-mask: The address mask limitation. Defaults to 64.
Example:
......@@ -24,6 +23,5 @@ Example:
interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
"eip";
clocks = <&cpm_syscon0 1 26>;
dma-mask = <0xff 0xffffffff>;
status = "disabled";
};
Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
浏览文件 @ 29fda25a
......@@ -78,7 +78,6 @@ Example:
};
dwmmc0@12200000 {
num-slots = <1>;
cap-mmc-highspeed;
cap-sd-highspeed;
broken-cd;
......
Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
浏览文件 @ 29fda25a
......@@ -24,6 +24,5 @@ Example:
fifo-depth = <0x20>;
bus-width = <4>;
num-slots = <1>;
disable-wp;
};
Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
浏览文件 @ 29fda25a
......@@ -36,7 +36,6 @@ Example:
/* Board portion */
dwmmc0@fcd03000 {
num-slots = <1>;
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
pinctrl-names = "default";
......@@ -52,7 +51,6 @@ Example:
dwmmc_1: dwmmc1@f723e000 {
compatible = "hisilicon,hi6220-dw-mshc";
num-slots = <0x1>;
bus-width = <0x4>;
disable-wp;
cap-sd-highspeed;
......
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
浏览文件 @ 29fda25a
......@@ -12,12 +12,12 @@ Required Properties:
* #address-cells: should be 1.
* #size-cells: should be 0.
# Slots: The slot specific information are contained within child-nodes with
each child-node representing a supported slot. There should be atleast one
child node representing a card slot. The name of the child node representing
the slot is recommended to be slot@n where n is the unique number of the slot
connected to the controller. The following are optional properties which
can be included in the slot child node.
# Slots (DEPRECATED): The slot specific information are contained within
child-nodes with each child-node representing a supported slot. There should
be atleast one child node representing a card slot. The name of the child node
representing the slot is recommended to be slot@n where n is the unique number
of the slot connected to the controller. The following are optional properties
which can be included in the slot child node.
* reg: specifies the physical slot number. The valid values of this
property is 0 to (num-slots -1), where num-slots is the value
......@@ -63,7 +63,7 @@ Optional properties:
clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
(Use the "max-frequency" instead of "clock-freq-min-max".)
* num-slots: specifies the number of slots supported by the controller.
* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
The number of physical slots actually used could be equal or less than the
value specified by num-slots. If this property is not specified, the value
of num-slot property is assumed to be 1.
......@@ -124,7 +124,6 @@ board specific portions as listed below.
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
num-slots = <1>;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
......@@ -139,7 +138,6 @@ board specific portions as listed below.
dwmmc0@12200000 {
clock-frequency = <400000000>;
clock-freq-min-max = <400000 200000000>;
num-slots = <1>;
broken-cd;
fifo-depth = <0x80>;
card-detect-delay = <200>;
......
Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
浏览文件 @ 29fda25a
......@@ -25,7 +25,6 @@ Example:
clock-frequency = <50000000>;
clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
clock-names = "biu", "ciu";
num-slots = <1>;
max-frequency = <50000000>;
cap-sdio-irq;
cap-sd-highspeed;
......
Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
浏览文件 @ 29fda25a
......@@ -4,7 +4,7 @@ Required properties:
- compatible: Should be one of the following.
- "rockchip,rk3066a-efuse" - for RK3066a SoCs.
- "rockchip,rk3188-efuse" - for RK3188 SoCs.
- "rockchip,rk322x-efuse" - for RK322x SoCs.
- "rockchip,rk3228-efuse" - for RK3228 SoCs.
- "rockchip,rk3288-efuse" - for RK3288 SoCs.
- "rockchip,rk3399-efuse" - for RK3399 SoCs.
- reg: Should contain the registers location and exact eFuse size
......
Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
浏览文件 @ 29fda25a
......@@ -9,7 +9,6 @@ Optional properties:
- fsl,irda-mode : Indicate the uart supports irda mode
- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
in DCE mode by default.
- fsl,dma-size : Indicate the size of the DMA buffer and its periods
Please check Documentation/devicetree/bindings/serial/serial.txt
for the complete list of generic properties.
......@@ -29,5 +28,4 @@ uart1: serial@73fbc000 {
interrupts = <31>;
uart-has-rtscts;
fsl,dte-mode;
fsl,dma-size = <1024 4>;
};
MAINTAINERS
浏览文件 @ 29fda25a
此差异已折叠。
Makefile
浏览文件 @ 29fda25a
VERSION = 4
PATCHLEVEL = 13
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc3
NAME = Fearless Coyote
# *DOCUMENTATION*
......
arch/alpha/include/uapi/asm/ioctls.h
浏览文件 @ 29fda25a
......@@ -100,7 +100,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
......
arch/arc/mm/dma.c
浏览文件 @ 29fda25a
......@@ -117,7 +117,7 @@ static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma,
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < count && user_count <= (count - off)) {
......
arch/arm/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -37,7 +37,7 @@ do { \
".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
"2:\t.asciz " #__file "\n" \
".popsection\n" \
".pushsection __bug_table,\"a\"\n" \
".pushsection __bug_table,\"aw\"\n" \
".align 2\n" \
"3:\t.word 1b, 2b\n" \
"\t.hword " #__line ", 0\n" \
......
arch/arm/include/asm/kexec.h
浏览文件 @ 29fda25a
......@@ -19,6 +19,11 @@
#ifndef __ASSEMBLY__
#define ARCH_HAS_KIMAGE_ARCH
struct kimage_arch {
u32 kernel_r2;
};
/**
* crash_setup_regs() - save registers for the panic kernel
* @newregs: registers are saved here
......
arch/arm/include/asm/ucontext.h
浏览文件 @ 29fda25a
......@@ -35,6 +35,12 @@ struct ucontext {
* bytes, to prevent unpredictable padding in the signal frame.
*/
/*
* Dummy padding block: if this magic is encountered, the block should
* be skipped using the corresponding size field.
*/
#define DUMMY_MAGIC 0xb0d9ed01
#ifdef CONFIG_CRUNCH
#define CRUNCH_MAGIC 0x5065cf03
#define CRUNCH_STORAGE_SIZE (CRUNCH_SIZE + 8)
......
arch/arm/kernel/machine_kexec.c
浏览文件 @ 29fda25a
......@@ -30,7 +30,6 @@ extern unsigned long kexec_boot_atags;
static atomic_t waiting_for_crash_ipi;
static unsigned long dt_mem;
/*
* Provide a dummy crash_notes definition while crash dump arrives to arm.
* This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
......@@ -42,6 +41,9 @@ int machine_kexec_prepare(struct kimage *image)
__be32 header;
int i, err;
image->arch.kernel_r2 = image->start - KEXEC_ARM_ZIMAGE_OFFSET
+ KEXEC_ARM_ATAGS_OFFSET;
/*
* Validate that if the current HW supports SMP, then the SW supports
* and implements CPU hotplug for the current HW. If not, we won't be
......@@ -66,8 +68,8 @@ int machine_kexec_prepare(struct kimage *image)
if (err)
return err;
if (be32_to_cpu(header) == OF_DT_HEADER)
dt_mem = current_segment->mem;
if (header == cpu_to_be32(OF_DT_HEADER))
image->arch.kernel_r2 = current_segment->mem;
}
return 0;
}
......@@ -165,8 +167,7 @@ void machine_kexec(struct kimage *image)
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = dt_mem ?: image->start - KEXEC_ARM_ZIMAGE_OFFSET
+ KEXEC_ARM_ATAGS_OFFSET;
kexec_boot_atags = image->arch.kernel_r2;
/* copy our kernel relocation code to the control code page */
reboot_entry = fncpy(reboot_code_buffer,
......
arch/arm/kernel/setup.c
浏览文件 @ 29fda25a
......@@ -987,6 +987,9 @@ static void __init reserve_crashkernel(void)
if (crash_base <= 0) {
unsigned long long crash_max = idmap_to_phys((u32)~0);
unsigned long long lowmem_max = __pa(high_memory - 1) + 1;
if (crash_max > lowmem_max)
crash_max = lowmem_max;
crash_base = memblock_find_in_range(CRASH_ALIGN, crash_max,
crash_size, CRASH_ALIGN);
if (!crash_base) {
......
arch/arm/kernel/signal.c
浏览文件 @ 29fda25a
......@@ -40,8 +40,10 @@ static int preserve_crunch_context(struct crunch_sigframe __user *frame)
return __copy_to_user(frame, kframe, sizeof(*frame));
}
static int restore_crunch_context(struct crunch_sigframe __user *frame)
static int restore_crunch_context(char __user **auxp)
{
struct crunch_sigframe __user *frame =
(struct crunch_sigframe __user *)*auxp;
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
......@@ -52,6 +54,7 @@ static int restore_crunch_context(struct crunch_sigframe __user *frame)
if (kframe->magic != CRUNCH_MAGIC ||
kframe->size != CRUNCH_STORAGE_SIZE)
return -1;
*auxp += CRUNCH_STORAGE_SIZE;
crunch_task_restore(current_thread_info(), &kframe->storage);
return 0;
}
......@@ -59,21 +62,39 @@ static int restore_crunch_context(struct crunch_sigframe __user *frame)
#ifdef CONFIG_IWMMXT
static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
static int preserve_iwmmxt_context(struct iwmmxt_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
int err = 0;
/* the iWMMXt context must be 64 bit aligned */
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
kframe->magic = IWMMXT_MAGIC;
kframe->size = IWMMXT_STORAGE_SIZE;
iwmmxt_task_copy(current_thread_info(), &kframe->storage);
return __copy_to_user(frame, kframe, sizeof(*frame));
if (test_thread_flag(TIF_USING_IWMMXT)) {
kframe->magic = IWMMXT_MAGIC;
kframe->size = IWMMXT_STORAGE_SIZE;
iwmmxt_task_copy(current_thread_info(), &kframe->storage);
err = __copy_to_user(frame, kframe, sizeof(*frame));
} else {
/*
* For bug-compatibility with older kernels, some space
* has to be reserved for iWMMXt even if it's not used.
* Set the magic and size appropriately so that properly
* written userspace can skip it reliably:
*/
__put_user_error(DUMMY_MAGIC, &frame->magic, err);
__put_user_error(IWMMXT_STORAGE_SIZE, &frame->size, err);
}
return err;
}
static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
static int restore_iwmmxt_context(char __user **auxp)
{
struct iwmmxt_sigframe __user *frame =
(struct iwmmxt_sigframe __user *)*auxp;
char kbuf[sizeof(*frame) + 8];
struct iwmmxt_sigframe *kframe;
......@@ -81,10 +102,28 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
if (__copy_from_user(kframe, frame, sizeof(*frame)))
return -1;
if (kframe->magic != IWMMXT_MAGIC ||
kframe->size != IWMMXT_STORAGE_SIZE)
/*
* For non-iWMMXt threads: a single iwmmxt_sigframe-sized dummy
* block is discarded for compatibility with setup_sigframe() if
* present, but we don't mandate its presence. If some other
* magic is here, it's not for us:
*/
if (!test_thread_flag(TIF_USING_IWMMXT) &&
kframe->magic != DUMMY_MAGIC)
return 0;
if (kframe->size != IWMMXT_STORAGE_SIZE)
return -1;
iwmmxt_task_restore(current_thread_info(), &kframe->storage);
if (test_thread_flag(TIF_USING_IWMMXT)) {
if (kframe->magic != IWMMXT_MAGIC)
return -1;
iwmmxt_task_restore(current_thread_info(), &kframe->storage);
}
*auxp += IWMMXT_STORAGE_SIZE;
return 0;
}
......@@ -107,8 +146,10 @@ static int preserve_vfp_context(struct vfp_sigframe __user *frame)
return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
}
static int restore_vfp_context(struct vfp_sigframe __user *frame)
static int restore_vfp_context(char __user **auxp)
{
struct vfp_sigframe __user *frame =
(struct vfp_sigframe __user *)*auxp;
unsigned long magic;
unsigned long size;
int err = 0;
......@@ -121,6 +162,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
*auxp += size;
return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
}
......@@ -141,7 +183,7 @@ struct rt_sigframe {
static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
{
struct aux_sigframe __user *aux;
char __user *aux;
sigset_t set;
int err;
......@@ -169,18 +211,18 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
err |= !valid_user_regs(regs);
aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
aux = (char __user *) sf->uc.uc_regspace;
#ifdef CONFIG_CRUNCH
if (err == 0)
err |= restore_crunch_context(&aux->crunch);
err |= restore_crunch_context(&aux);
#endif
#ifdef CONFIG_IWMMXT
if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
err |= restore_iwmmxt_context(&aux->iwmmxt);
if (err == 0)
err |= restore_iwmmxt_context(&aux);
#endif
#ifdef CONFIG_VFP
if (err == 0)
err |= restore_vfp_context(&aux->vfp);
err |= restore_vfp_context(&aux);
#endif
return err;
......@@ -286,7 +328,7 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
err |= preserve_crunch_context(&aux->crunch);
#endif
#ifdef CONFIG_IWMMXT
if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
if (err == 0)
err |= preserve_iwmmxt_context(&aux->iwmmxt);
#endif
#ifdef CONFIG_VFP
......
arch/arm/mach-omap2/hsmmc.c
浏览文件 @ 29fda25a
......@@ -32,120 +32,6 @@ static u16 control_devconf1_offset;
#define HSMMC_NAME_LEN 9
static void omap_hsmmc1_before_set_reg(struct device *dev,
int power_on, int vdd)
{
u32 reg, prog_io;
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (mmc->remux)
mmc->remux(dev, power_on);
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
* card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
*
* FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
if ((1 << vdd) >= MMC_VDD_30_31)
reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
else
reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
if (mmc->internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
}
reg = omap_ctrl_readl(control_pbias_offset);
if (cpu_is_omap3630()) {
/* Set MMC I/O to 52MHz */
prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
} else {
reg |= OMAP2_PBIASSPEEDCTRL0;
}
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
} else {
reg = omap_ctrl_readl(control_pbias_offset);
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
}
}
static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
{
u32 reg;
/* 100ms delay required for PBIAS configuration */
msleep(100);
if (power_on) {
reg = omap_ctrl_readl(control_pbias_offset);
reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
if ((1 << vdd) <= MMC_VDD_165_195)
reg &= ~OMAP2_PBIASLITEVMODE0;
else
reg |= OMAP2_PBIASLITEVMODE0;
omap_ctrl_writel(reg, control_pbias_offset);
} else {
reg = omap_ctrl_readl(control_pbias_offset);
reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
OMAP2_PBIASLITEVMODE0);
omap_ctrl_writel(reg, control_pbias_offset);
}
}
static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
{
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
if (mmc->internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (mmc->remux)
mmc->remux(dev, power_on);
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (power_on)
hsmmc2_select_input_clk_src(mmc);
return 0;
}
static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
{
return 0;
}
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
struct omap_hsmmc_platform_data *mmc)
{
......@@ -157,101 +43,11 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
return -ENOMEM;
}
if (c->name)
strncpy(hc_name, c->name, HSMMC_NAME_LEN);
else
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
c->mmc, 1);
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1);
mmc->name = hc_name;
mmc->caps = c->caps;
mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
if (c->cover_only) {
/* detect if mobile phone cover removed */
mmc->gpio_cd = -EINVAL;
mmc->gpio_cod = c->gpio_cd;
} else {
/* card detect pin on the mmc socket itself */
mmc->gpio_cd = c->gpio_cd;
mmc->gpio_cod = -EINVAL;
}
mmc->gpio_wp = c->gpio_wp;
mmc->remux = c->remux;
mmc->init_card = c->init_card;
if (c->nonremovable)
mmc->nonremovable = 1;
/*
* NOTE: MMC slots should have a Vcc regulator set up.
* This may be from a TWL4030-family chip, another
* controllable regulator, or a fixed supply.
*
* temporary HACK: ocr_mask instead of fixed supply
*/
if (soc_is_am35xx())
mmc->ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 |
MMC_VDD_31_32;
else
mmc->ocr_mask = c->ocr_mask;
if (!soc_is_am35xx())
mmc->features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
if (mmc->features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->before_set_reg =
omap_hsmmc1_before_set_reg;
mmc->after_set_reg =
omap_hsmmc1_after_set_reg;
}
if (soc_is_am35xx())
mmc->set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
mmc->caps = c->caps;
}
break;
case 2:
if (soc_is_am35xx())
mmc->set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
c->transceiver = 1;
if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
if (mmc->features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
mmc->before_set_reg = hsmmc2_before_set_reg;
mmc->after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
mmc->before_set_reg = NULL;
mmc->after_set_reg = NULL;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
kfree(hc_name);
return -ENODEV;
}
return 0;
}
......@@ -260,7 +56,6 @@ static int omap_hsmmc_done;
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
......@@ -269,32 +64,12 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
omap_hsmmc_done++;
for (; c->mmc; c++) {
if (!c->deferred)
continue;
pdev = c->pdev;
if (!pdev)
continue;
mmc_pdata = pdev->dev.platform_data;
if (!mmc_pdata)
continue;
if (c->cover_only) {
/* detect if mobile phone cover removed */
mmc_pdata->gpio_cd = -EINVAL;
mmc_pdata->gpio_cod = c->gpio_cd;
} else {
/* card detect pin on the mmc socket itself */
mmc_pdata->gpio_cd = c->gpio_cd;
mmc_pdata->gpio_cod = -EINVAL;
}
mmc_pdata->gpio_wp = c->gpio_wp;
res = omap_device_register(pdev);
if (res)
pr_err("Could not late init MMC %s\n",
c->name);
pr_err("Could not late init MMC\n");
}
}
......@@ -336,13 +111,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
/*
* erratum 2.1.1.128 doesn't apply if board has
* a transceiver is attached
*/
if (hsmmcinfo->transceiver)
mmc_data->controller_flags &=
~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
}
pdev = platform_device_alloc(name, ctrl_nr - 1);
......@@ -367,9 +135,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
hsmmcinfo->pdev = pdev;
if (hsmmcinfo->deferred)
goto free_mmc;
res = omap_device_register(pdev);
if (res) {
pr_err("Could not register od for %s\n", name);
......
arch/arm/mach-omap2/hsmmc.h
浏览文件 @ 29fda25a
......@@ -12,18 +12,9 @@ struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
bool nonremovable; /* Nonremovable e.g. eMMC */
bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
/* Remux (pad configuration) when powering on/off */
void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
......
arch/arm/mach-ux500/cpu-db8500.c
浏览文件 @ 29fda25a
......@@ -133,6 +133,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
static struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
.irq_flags = IRQF_NOBALANCING | IRQF_NO_THREAD,
};
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
......
arch/arm/mm/dma-mapping-nommu.c
浏览文件 @ 29fda25a
......@@ -40,9 +40,21 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size,
{
const struct dma_map_ops *ops = &dma_noop_ops;
void *ret;
/*
* We are here because:
* Try generic allocator first if we are advertised that
* consistency is not required.
*/
if (attrs & DMA_ATTR_NON_CONSISTENT)
return ops->alloc(dev, size, dma_handle, gfp, attrs);
ret = dma_alloc_from_global_coherent(size, dma_handle);
/*
* dma_alloc_from_global_coherent() may fail because:
*
* - no consistent DMA region has been defined, so we can't
* continue.
* - there is no space left in consistent DMA region, so we
......@@ -50,11 +62,8 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size,
* advertised that consistency is not required.
*/
if (attrs & DMA_ATTR_NON_CONSISTENT)
return ops->alloc(dev, size, dma_handle, gfp, attrs);
WARN_ON_ONCE(1);
return NULL;
WARN_ON_ONCE(ret == NULL);
return ret;
}
static void arm_nommu_dma_free(struct device *dev, size_t size,
......@@ -63,14 +72,31 @@ static void arm_nommu_dma_free(struct device *dev, size_t size,
{
const struct dma_map_ops *ops = &dma_noop_ops;
if (attrs & DMA_ATTR_NON_CONSISTENT)
if (attrs & DMA_ATTR_NON_CONSISTENT) {
ops->free(dev, size, cpu_addr, dma_addr, attrs);
else
WARN_ON_ONCE(1);
} else {
int ret = dma_release_from_global_coherent(get_order(size),
cpu_addr);
WARN_ON_ONCE(ret == 0);
}
return;
}
static int arm_nommu_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
unsigned long attrs)
{
int ret;
if (dma_mmap_from_global_coherent(vma, cpu_addr, size, &ret))
return ret;
return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size);
}
static void __dma_page_cpu_to_dev(phys_addr_t paddr, size_t size,
enum dma_data_direction dir)
{
......@@ -173,6 +199,7 @@ static void arm_nommu_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist
const struct dma_map_ops arm_nommu_dma_ops = {
.alloc = arm_nommu_dma_alloc,
.free = arm_nommu_dma_free,
.mmap = arm_nommu_dma_mmap,
.map_page = arm_nommu_dma_map_page,
.unmap_page = arm_nommu_dma_unmap_page,
.map_sg = arm_nommu_dma_map_sg,
......
arch/arm/mm/dma-mapping.c
浏览文件 @ 29fda25a
......@@ -851,7 +851,7 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
unsigned long pfn = dma_to_pfn(dev, dma_addr);
unsigned long off = vma->vm_pgoff;
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) {
......
arch/arm64/include/asm/atomic_lse.h
浏览文件 @ 29fda25a
......@@ -435,7 +435,7 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
" sub x30, x30, %[ret]\n"
" cbnz x30, 1b\n"
"2:")
: [ret] "+&r" (x0), [v] "+Q" (v->counter)
: [ret] "+r" (x0), [v] "+Q" (v->counter)
:
: __LL_SC_CLOBBERS, "cc", "memory");
......
arch/arm64/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -36,7 +36,7 @@
#ifdef CONFIG_GENERIC_BUG
#define __BUG_ENTRY(flags) \
".pushsection __bug_table,\"a\"\n\t" \
".pushsection __bug_table,\"aw\"\n\t" \
".align 2\n\t" \
"0: .long 1f - 0b\n\t" \
_BUGVERBOSE_LOCATION(__FILE__, __LINE__) \
......
arch/arm64/include/asm/sysreg.h
浏览文件 @ 29fda25a
......@@ -492,7 +492,7 @@ asm(
* the "%x0" template means XZR.
*/
#define write_sysreg(v, r) do { \
u64 __val = (u64)v; \
u64 __val = (u64)(v); \
asm volatile("msr " __stringify(r) ", %x0" \
: : "rZ" (__val)); \
} while (0)
......@@ -508,7 +508,7 @@ asm(
})
#define write_sysreg_s(v, r) do { \
u64 __val = (u64)v; \
u64 __val = (u64)(v); \
asm volatile("msr_s " __stringify(r) ", %x0" : : "rZ" (__val)); \
} while (0)
......
arch/arm64/include/asm/uaccess.h
浏览文件 @ 29fda25a
......@@ -69,7 +69,7 @@ static inline void set_fs(mm_segment_t fs)
*/
#define __range_ok(addr, size) \
({ \
unsigned long __addr = (unsigned long __force)(addr); \
unsigned long __addr = (unsigned long)(addr); \
unsigned long flag, roksum; \
__chk_user_ptr(addr); \
asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls" \
......
arch/arm64/kernel/cpu_ops.c
浏览文件 @ 29fda25a
......@@ -82,8 +82,8 @@ static const char *__init cpu_read_enable_method(int cpu)
* Don't warn spuriously.
*/
if (cpu != 0)
pr_err("%s: missing enable-method property\n",
dn->full_name);
pr_err("%pOF: missing enable-method property\n",
dn);
}
} else {
enable_method = acpi_get_enable_method(cpu);
......
arch/arm64/kernel/smp.c
浏览文件 @ 29fda25a
......@@ -469,7 +469,7 @@ static u64 __init of_get_cpu_mpidr(struct device_node *dn)
*/
cell = of_get_property(dn, "reg", NULL);
if (!cell) {
pr_err("%s: missing reg property\n", dn->full_name);
pr_err("%pOF: missing reg property\n", dn);
return INVALID_HWID;
}
......@@ -478,7 +478,7 @@ static u64 __init of_get_cpu_mpidr(struct device_node *dn)
* Non affinity bits must be set to 0 in the DT
*/
if (hwid & ~MPIDR_HWID_BITMASK) {
pr_err("%s: invalid reg property\n", dn->full_name);
pr_err("%pOF: invalid reg property\n", dn);
return INVALID_HWID;
}
return hwid;
......@@ -627,8 +627,8 @@ static void __init of_parse_and_init_cpus(void)
goto next;
if (is_mpidr_duplicate(cpu_count, hwid)) {
pr_err("%s: duplicate cpu reg properties in the DT\n",
dn->full_name);
pr_err("%pOF: duplicate cpu reg properties in the DT\n",
dn);
goto next;
}
......@@ -640,8 +640,8 @@ static void __init of_parse_and_init_cpus(void)
*/
if (hwid == cpu_logical_map(0)) {
if (bootcpu_valid) {
pr_err("%s: duplicate boot cpu reg property in DT\n",
dn->full_name);
pr_err("%pOF: duplicate boot cpu reg property in DT\n",
dn);
goto next;
}
......
arch/arm64/kernel/topology.c
浏览文件 @ 29fda25a
......@@ -45,7 +45,7 @@ static int __init get_cpu_for_node(struct device_node *node)
}
}
pr_crit("Unable to find CPU node for %s\n", cpu_node->full_name);
pr_crit("Unable to find CPU node for %pOF\n", cpu_node);
of_node_put(cpu_node);
return -1;
......@@ -71,8 +71,8 @@ static int __init parse_core(struct device_node *core, int cluster_id,
cpu_topology[cpu].core_id = core_id;
cpu_topology[cpu].thread_id = i;
} else {
pr_err("%s: Can't get CPU for thread\n",
t->full_name);
pr_err("%pOF: Can't get CPU for thread\n",
t);
of_node_put(t);
return -EINVAL;
}
......@@ -84,15 +84,15 @@ static int __init parse_core(struct device_node *core, int cluster_id,
cpu = get_cpu_for_node(core);
if (cpu >= 0) {
if (!leaf) {
pr_err("%s: Core has both threads and CPU\n",
core->full_name);
pr_err("%pOF: Core has both threads and CPU\n",
core);
return -EINVAL;
}
cpu_topology[cpu].cluster_id = cluster_id;
cpu_topology[cpu].core_id = core_id;
} else if (leaf) {
pr_err("%s: Can't get CPU for leaf core\n", core->full_name);
pr_err("%pOF: Can't get CPU for leaf core\n", core);
return -EINVAL;
}
......@@ -137,8 +137,8 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
has_cores = true;
if (depth == 0) {
pr_err("%s: cpu-map children should be clusters\n",
c->full_name);
pr_err("%pOF: cpu-map children should be clusters\n",
c);
of_node_put(c);
return -EINVAL;
}
......@@ -146,8 +146,8 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
if (leaf) {
ret = parse_core(c, cluster_id, core_id++);
} else {
pr_err("%s: Non-leaf cluster with core %s\n",
cluster->full_name, name);
pr_err("%pOF: Non-leaf cluster with core %s\n",
cluster, name);
ret = -EINVAL;
}
......@@ -159,7 +159,7 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
} while (c);
if (leaf && !has_cores)
pr_warn("%s: empty cluster\n", cluster->full_name);
pr_warn("%pOF: empty cluster\n", cluster);
if (leaf)
cluster_id++;
......
arch/arm64/kernel/traps.c
浏览文件 @ 29fda25a
......@@ -274,10 +274,12 @@ static DEFINE_RAW_SPINLOCK(die_lock);
void die(const char *str, struct pt_regs *regs, int err)
{
int ret;
unsigned long flags;
raw_spin_lock_irqsave(&die_lock, flags);
oops_enter();
raw_spin_lock_irq(&die_lock);
console_verbose();
bust_spinlocks(1);
ret = __die(str, err, regs);
......@@ -287,13 +289,15 @@ void die(const char *str, struct pt_regs *regs, int err)
bust_spinlocks(0);
add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
raw_spin_unlock_irq(&die_lock);
oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
raw_spin_unlock_irqrestore(&die_lock, flags);
if (ret != NOTIFY_STOP)
do_exit(SIGSEGV);
}
......
arch/arm64/lib/copy_page.S
浏览文件 @ 29fda25a
......@@ -30,9 +30,10 @@
*/
ENTRY(copy_page)
alternative_if ARM64_HAS_NO_HW_PREFETCH
# Prefetch two cache lines ahead.
prfm pldl1strm, [x1, #128]
prfm pldl1strm, [x1, #256]
// Prefetch three cache lines ahead.
prfm pldl1strm, [x1, #128]
prfm pldl1strm, [x1, #256]
prfm pldl1strm, [x1, #384]
alternative_else_nop_endif
ldp x2, x3, [x1]
......@@ -50,7 +51,7 @@ alternative_else_nop_endif
subs x18, x18, #128
alternative_if ARM64_HAS_NO_HW_PREFETCH
prfm pldl1strm, [x1, #384]
prfm pldl1strm, [x1, #384]
alternative_else_nop_endif
stnp x2, x3, [x0]
......
arch/arm64/mm/dma-mapping.c
浏览文件 @ 29fda25a
......@@ -329,7 +329,7 @@ static int __swiotlb_mmap(struct device *dev,
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot,
is_device_dma_coherent(dev));
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
return __swiotlb_mmap_pfn(vma, pfn, size);
......@@ -706,7 +706,7 @@ static int __iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot,
is_device_dma_coherent(dev));
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) {
......
arch/arm64/mm/mmu.c
浏览文件 @ 29fda25a
......@@ -496,7 +496,7 @@ void mark_rodata_ro(void)
static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
pgprot_t prot, struct vm_struct *vma,
int flags)
int flags, unsigned long vm_flags)
{
phys_addr_t pa_start = __pa_symbol(va_start);
unsigned long size = va_end - va_start;
......@@ -507,10 +507,13 @@ static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
__create_pgd_mapping(pgd, pa_start, (unsigned long)va_start, size, prot,
early_pgtable_alloc, flags);
if (!(vm_flags & VM_NO_GUARD))
size += PAGE_SIZE;
vma->addr = va_start;
vma->phys_addr = pa_start;
vma->size = size;
vma->flags = VM_MAP;
vma->flags = VM_MAP | vm_flags;
vma->caller = __builtin_return_address(0);
vm_area_add_early(vma);
......@@ -541,14 +544,15 @@ static void __init map_kernel(pgd_t *pgd)
* Only rodata will be remapped with different permissions later on,
* all other segments are allowed to use contiguous mappings.
*/
map_kernel_segment(pgd, _text, _etext, text_prot, &vmlinux_text, 0);
map_kernel_segment(pgd, _text, _etext, text_prot, &vmlinux_text, 0,
VM_NO_GUARD);
map_kernel_segment(pgd, __start_rodata, __inittext_begin, PAGE_KERNEL,
&vmlinux_rodata, NO_CONT_MAPPINGS);
&vmlinux_rodata, NO_CONT_MAPPINGS, VM_NO_GUARD);
map_kernel_segment(pgd, __inittext_begin, __inittext_end, text_prot,
&vmlinux_inittext, 0);
&vmlinux_inittext, 0, VM_NO_GUARD);
map_kernel_segment(pgd, __initdata_begin, __initdata_end, PAGE_KERNEL,
&vmlinux_initdata, 0);
map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data, 0);
&vmlinux_initdata, 0, VM_NO_GUARD);
map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0);
if (!pgd_val(*pgd_offset_raw(pgd, FIXADDR_START))) {
/*
......
arch/arm64/mm/numa.c
浏览文件 @ 29fda25a
......@@ -208,8 +208,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
}
node_set(nid, numa_nodes_parsed);
pr_info("Adding memblock [0x%llx - 0x%llx] on node %d\n",
start, (end - 1), nid);
return ret;
}
......@@ -223,10 +221,7 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
void *nd;
int tnid;
if (start_pfn < end_pfn)
pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n", nid,
start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1);
else
if (start_pfn >= end_pfn)
pr_info("Initmem setup node %d [<memory-less node>]\n", nid);
nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
......
arch/blackfin/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -21,7 +21,7 @@
#define _BUG_OR_WARN(flags) \
asm volatile( \
"1: .hword %0\n" \
" .section __bug_table,\"a\",@progbits\n" \
" .section __bug_table,\"aw\",@progbits\n" \
"2: .long 1b\n" \
" .long %1\n" \
" .short %2\n" \
......@@ -38,7 +38,7 @@
#define _BUG_OR_WARN(flags) \
asm volatile( \
"1: .hword %0\n" \
" .section __bug_table,\"a\",@progbits\n" \
" .section __bug_table,\"aw\",@progbits\n" \
"2: .long 1b\n" \
" .short %1\n" \
" .org 2b + %2\n" \
......
arch/mips/include/uapi/asm/ioctls.h
浏览文件 @ 29fda25a
......@@ -91,7 +91,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
......
arch/mips/mm/dma-default.c
浏览文件 @ 29fda25a
......@@ -232,7 +232,7 @@ static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
else
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < count && user_count <= (count - off)) {
......
arch/mn10300/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -21,7 +21,7 @@ do { \
asm volatile( \
" syscall 15 \n" \
"0: \n" \
" .section __bug_table,\"a\" \n" \
" .section __bug_table,\"aw\" \n" \
" .long 0b,%0,%1 \n" \
" .previous \n" \
: \
......
arch/parisc/configs/712_defconfig
浏览文件 @ 29fda25a
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
......@@ -14,7 +12,6 @@ CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA7100LC=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_GSC_LASI=y
......@@ -32,11 +29,9 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_IP_NF_QUEUE=m
CONFIG_LLC2=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
......@@ -65,21 +60,20 @@ CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=17
......@@ -88,22 +82,17 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
......@@ -111,13 +100,9 @@ CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HARMONY=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_AUTOFS4_FS=y
......@@ -130,14 +115,10 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_UFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
......@@ -177,21 +158,16 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
......@@ -200,6 +176,7 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_LIBCRC32C=m
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
arch/parisc/configs/a500_defconfig
浏览文件 @ 29fda25a
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
......@@ -16,7 +13,6 @@ CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA8X00=y
CONFIG_64BIT=y
CONFIG_SMP=y
......@@ -43,21 +39,17 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_LRO is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_RAW=m
......@@ -70,7 +62,6 @@ CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
......@@ -94,7 +85,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_QLOGIC_1280=m
......@@ -106,43 +96,38 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_CTL=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_3C589=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=m
CONFIG_TIGON3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MMIO=y
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_E100=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_E1000=m
CONFIG_TIGON3=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
......@@ -151,7 +136,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_PDC_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
......@@ -160,7 +144,6 @@ CONFIG_AGP_PARISC=y
# CONFIG_STI_CONSOLE is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_AUTOFS4_FS=y
......@@ -173,13 +156,9 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_UFS_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4=m
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
......@@ -187,17 +166,12 @@ CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_LIBCRC32C=m
arch/parisc/configs/b180_defconfig
浏览文件 @ 29fda25a
......@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
......@@ -25,8 +24,6 @@ CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -53,10 +50,9 @@ CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_LASI_82596=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_LASI_82596=y
CONFIG_PPP=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_HIL_OLD is not set
......@@ -71,40 +67,31 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_PRINTER=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HARMONY=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SMB_FS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_HEADERS_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SECURITY=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
arch/parisc/configs/c3000_defconfig
浏览文件 @ 29fda25a
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
......@@ -15,7 +12,6 @@ CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA8X00=y
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_GSC is not set
......@@ -31,13 +27,11 @@ CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_IP_NF_QUEUE=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
......@@ -50,13 +44,11 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_PATA_SIL680=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
......@@ -76,28 +68,23 @@ CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_CTL=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_ACENIC=m
CONFIG_TIGON3=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
CONFIG_TULIP_MMIO=y
CONFIG_NET_PCI=y
CONFIG_E100=m
CONFIG_ACENIC=m
CONFIG_E1000=m
CONFIG_TIGON3=m
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_SERIO=m
......@@ -111,7 +98,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
......@@ -121,9 +107,6 @@ CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_AD1889=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
......@@ -139,7 +122,6 @@ CONFIG_USB_MICROTEK=m
CONFIG_USB_LEGOTOWER=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_XFS_FS=m
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
......@@ -149,7 +131,6 @@ CONFIG_VFAT_FS=m
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
......@@ -159,18 +140,13 @@ CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_LIBCRC32C=m
arch/parisc/configs/c8000_defconfig
浏览文件 @ 29fda25a
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SLAB=y
......@@ -23,7 +20,6 @@ CONFIG_PA8X00=y
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_IOMMU_CCIO=y
CONFIG_PCI=y
CONFIG_PCI_LBA=y
......@@ -146,7 +142,6 @@ CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_STI is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
......@@ -157,12 +152,9 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_AD1889=m
# CONFIG_SND_USB is not set
# CONFIG_SND_GSC is not set
......@@ -174,8 +166,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=m
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_PROC_INFO=y
CONFIG_XFS_FS=m
......@@ -238,11 +228,8 @@ CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_PROVE_RCU_DELAY=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_LATENCYTOP=y
CONFIG_KEYS=y
......
arch/parisc/configs/default_defconfig
浏览文件 @ 29fda25a
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
......@@ -41,9 +39,7 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_IPV6=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
......@@ -82,26 +78,23 @@ CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_BLK_DEV_DM=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_NET_PCI=y
CONFIG_ACENIC=y
CONFIG_TIGON3=y
CONFIG_NET_PCMCIA=y
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_LASI_82596=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_KEYBOARD_HIL_OLD is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=y
......@@ -109,31 +102,24 @@ CONFIG_SERIAL_8250_NR_UARTS=17
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_AD1889=y
CONFIG_SND_HARMONY=y
CONFIG_HID_GYRATION=y
......@@ -141,7 +127,6 @@ CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_USB=y
......@@ -150,21 +135,15 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_AUTOFS_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V4=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_CIFS=m
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
......@@ -204,30 +183,24 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_KEYS=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_LIBCRC32C=m
CONFIG_FONTS=y
arch/parisc/configs/generic-32bit_defconfig
浏览文件 @ 29fda25a
......@@ -2,15 +2,11 @@ CONFIG_LOCALVERSION="-32bit"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_PERF_EVENTS=y
......@@ -49,7 +45,6 @@ CONFIG_INET_ESP=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_LLC2=m
# CONFIG_WIRELESS is not set
......@@ -149,10 +144,8 @@ CONFIG_PRINTER=m
CONFIG_PPDEV=m
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_AGP=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_MODE_HELPERS=y
......@@ -169,11 +162,8 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_AD1889=m
CONFIG_SND_HARMONY=m
CONFIG_HIDRAW=y
......@@ -223,12 +213,7 @@ CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_RT=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QFMT_V2=y
......@@ -293,15 +278,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_LATENCYTOP=y
CONFIG_LKDTM=m
CONFIG_KEYS=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
......@@ -320,7 +302,6 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC_T10DIF=y
CONFIG_FONTS=y
arch/parisc/configs/generic-64bit_defconfig
浏览文件 @ 29fda25a
......@@ -8,10 +8,11 @@ CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
......@@ -52,7 +53,6 @@ CONFIG_INET_ESP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
......@@ -84,7 +84,6 @@ CONFIG_PATA_SIL680=y
CONFIG_ATA_GENERIC=y
CONFIG_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_RAID=m
CONFIG_DM_UEVENT=y
......@@ -138,21 +137,21 @@ CONFIG_QLGE=m
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_MDIO_BITBANG=m
CONFIG_PHYLIB=y
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
CONFIG_MDIO_BITBANG=m
CONFIG_VITESSE_PHY=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
......@@ -166,10 +165,8 @@ CONFIG_INPUT_MISC=y
CONFIG_SERIO_SERPORT=m
# CONFIG_HP_SDC is not set
CONFIG_SERIO_RAW=m
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_NOZOMI=m
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
......@@ -207,10 +204,8 @@ CONFIG_AGP=y
CONFIG_AGP_PARISC=y
CONFIG_DRM=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_UMS=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
......@@ -246,8 +241,6 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_BTRFS_FS=m
CONFIG_QUOTA=y
......@@ -286,27 +279,16 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
CONFIG_LIBCRC32C=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
arch/parisc/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -27,7 +27,7 @@
do { \
asm volatile("\n" \
"1:\t" PARISC_BUG_BREAK_ASM "\n" \
"\t.pushsection __bug_table,\"a\"\n" \
"\t.pushsection __bug_table,\"aw\"\n" \
"2:\t" ASM_WORD_INSN "1b, %c0\n" \
"\t.short %c1, %c2\n" \
"\t.org 2b+%c3\n" \
......@@ -50,7 +50,7 @@
do { \
asm volatile("\n" \
"1:\t" PARISC_BUG_BREAK_ASM "\n" \
"\t.pushsection __bug_table,\"a\"\n" \
"\t.pushsection __bug_table,\"aw\"\n" \
"2:\t" ASM_WORD_INSN "1b, %c0\n" \
"\t.short %c1, %c2\n" \
"\t.org 2b+%c3\n" \
......@@ -64,7 +64,7 @@
do { \
asm volatile("\n" \
"1:\t" PARISC_BUG_BREAK_ASM "\n" \
"\t.pushsection __bug_table,\"a\"\n" \
"\t.pushsection __bug_table,\"aw\"\n" \
"2:\t" ASM_WORD_INSN "1b\n" \
"\t.short %c0\n" \
"\t.org 2b+%c1\n" \
......
arch/parisc/include/asm/pdcpat.h
浏览文件 @ 29fda25a
......@@ -150,7 +150,7 @@
#define PDC_PAT_MEM_SETGM 9L /* Set Good Memory value */
#define PDC_PAT_MEM_ADD_PAGE 10L /* ADDs a page to the cell */
#define PDC_PAT_MEM_ADDRESS 11L /* Get Physical Location From */
/* Memory Address */
/* Memory Address */
#define PDC_PAT_MEM_GET_TXT_SIZE 12L /* Get Formatted Text Size */
#define PDC_PAT_MEM_GET_PD_TXT 13L /* Get PD Formatted Text */
#define PDC_PAT_MEM_GET_CELL_TXT 14L /* Get Cell Formatted Text */
......@@ -228,6 +228,17 @@ struct pdc_pat_mem_read_pd_retinfo { /* PDC_PAT_MEM/PDC_PAT_MEM_PD_READ */
unsigned long pdt_entries;
};
struct pdc_pat_mem_phys_mem_location { /* PDC_PAT_MEM/PDC_PAT_MEM_ADDRESS */
u64 cabinet:8;
u64 ign1:8;
u64 ign2:8;
u64 cell_slot:8;
u64 ign3:8;
u64 dimm_slot:8; /* DIMM slot, e.g. 0x1A, 0x2B, show user hex value! */
u64 ign4:8;
u64 source:4; /* for mem: always 0x07 */
u64 source_detail:4; /* for mem: always 0x04 (SIMM or DIMM) */
};
struct pdc_pat_pd_addr_map_entry {
unsigned char entry_type; /* 1 = Memory Descriptor Entry Type */
......@@ -319,6 +330,9 @@ extern int pdc_pat_mem_read_cell_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
extern int pdc_pat_mem_read_pd_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
unsigned long *pdt_entries_ptr, unsigned long count,
unsigned long offset);
extern int pdc_pat_mem_get_dimm_phys_location(
struct pdc_pat_mem_phys_mem_location *pret,
unsigned long phys_addr);
#endif /* __ASSEMBLY__ */
......
arch/parisc/include/uapi/asm/ioctls.h
浏览文件 @ 29fda25a
......@@ -60,7 +60,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
#define FIOCLEX 0x5451
......
arch/parisc/kernel/cache.c
浏览文件 @ 29fda25a
......@@ -453,8 +453,8 @@ void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
before it can be accessed through the kernel mapping. */
preempt_disable();
flush_dcache_page_asm(__pa(vfrom), vaddr);
preempt_enable();
copy_page_asm(vto, vfrom);
preempt_enable();
}
EXPORT_SYMBOL(copy_user_page);
......@@ -539,6 +539,10 @@ void flush_cache_mm(struct mm_struct *mm)
struct vm_area_struct *vma;
pgd_t *pgd;
/* Flush the TLB to avoid speculation if coherency is required. */
if (parisc_requires_coherency())
flush_tlb_all();
/* Flushing the whole cache on each cpu takes forever on
rp3440, etc. So, avoid it if the mm isn't too big. */
if (mm_total_size(mm) >= parisc_cache_flush_threshold) {
......@@ -577,33 +581,22 @@ void flush_cache_mm(struct mm_struct *mm)
void flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
unsigned long addr;
pgd_t *pgd;
BUG_ON(!vma->vm_mm->context);
/* Flush the TLB to avoid speculation if coherency is required. */
if (parisc_requires_coherency())
flush_tlb_range(vma, start, end);
if ((end - start) >= parisc_cache_flush_threshold) {
flush_cache_all();
return;
}
if (vma->vm_mm->context == mfsp(3)) {
flush_user_dcache_range_asm(start, end);
if (vma->vm_flags & VM_EXEC)
flush_user_icache_range_asm(start, end);
return;
}
BUG_ON(vma->vm_mm->context != mfsp(3));
pgd = vma->vm_mm->pgd;
for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
unsigned long pfn;
pte_t *ptep = get_ptep(pgd, addr);
if (!ptep)
continue;
pfn = pte_pfn(*ptep);
if (pfn_valid(pfn))
__flush_cache_page(vma, addr, PFN_PHYS(pfn));
}
flush_user_dcache_range_asm(start, end);
if (vma->vm_flags & VM_EXEC)
flush_user_icache_range_asm(start, end);
}
void
......@@ -612,7 +605,8 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
BUG_ON(!vma->vm_mm->context);
if (pfn_valid(pfn)) {
flush_tlb_page(vma, vmaddr);
if (parisc_requires_coherency())
flush_tlb_page(vma, vmaddr);
__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
}
}
......
arch/parisc/kernel/firmware.c
浏览文件 @ 29fda25a
......@@ -1481,12 +1481,44 @@ int pdc_pat_mem_read_pd_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
unsigned long offset)
{
int retval;
unsigned long flags;
unsigned long flags, entries;
spin_lock_irqsave(&pdc_lock, flags);
retval = mem_pdc_call(PDC_PAT_MEM, PDC_PAT_MEM_PD_READ,
__pa(&pret), __pa(pdt_entries_ptr),
__pa(&pdc_result), __pa(pdt_entries_ptr),
count, offset);
if (retval == PDC_OK) {
entries = min(pdc_result[0], count);
pret->actual_count_bytes = entries;
pret->pdt_entries = entries / sizeof(unsigned long);
}
spin_unlock_irqrestore(&pdc_lock, flags);
return retval;
}
/**
* pdc_pat_mem_get_dimm_phys_location - Get physical DIMM slot via PAT firmware
* @pret: ptr to hold returned information
* @phys_addr: physical address to examine
*
*/
int pdc_pat_mem_get_dimm_phys_location(
struct pdc_pat_mem_phys_mem_location *pret,
unsigned long phys_addr)
{
int retval;
unsigned long flags;
spin_lock_irqsave(&pdc_lock, flags);
retval = mem_pdc_call(PDC_PAT_MEM, PDC_PAT_MEM_ADDRESS,
__pa(&pdc_result), phys_addr);
if (retval == PDC_OK)
memcpy(pret, &pdc_result, sizeof(*pret));
spin_unlock_irqrestore(&pdc_lock, flags);
return retval;
......
arch/parisc/kernel/irq.c
浏览文件 @ 29fda25a
......@@ -413,6 +413,10 @@ static inline void stack_overflow_check(struct pt_regs *regs)
if (regs->sr[7])
return;
/* exit if already in panic */
if (sysctl_panic_on_stackoverflow < 0)
return;
/* calculate kernel stack usage */
stack_usage = sp - stack_start;
#ifdef CONFIG_IRQSTACKS
......@@ -454,8 +458,10 @@ static inline void stack_overflow_check(struct pt_regs *regs)
#ifdef CONFIG_IRQSTACKS
panic_check:
#endif
if (sysctl_panic_on_stackoverflow)
if (sysctl_panic_on_stackoverflow) {
sysctl_panic_on_stackoverflow = -1; /* disable further checks */
panic("low stack detected by irq handler - check messages\n");
}
#endif
}
......
arch/parisc/kernel/pdt.c
浏览文件 @ 29fda25a
......@@ -112,10 +112,12 @@ void __init pdc_pdt_init(void)
#ifdef CONFIG_64BIT
struct pdc_pat_mem_read_pd_retinfo pat_pret;
/* try old obsolete PAT firmware function first */
pdt_type = PDT_PAT_OLD;
ret = pdc_pat_mem_read_cell_pdt(&pat_pret, pdt_entry,
MAX_PDT_ENTRIES);
if (ret != PDC_OK) {
pdt_type = PDT_PAT_OLD;
pdt_type = PDT_PAT_NEW;
ret = pdc_pat_mem_read_pd_pdt(&pat_pret, pdt_entry,
MAX_PDT_TABLE_SIZE, 0);
}
......@@ -131,11 +133,20 @@ void __init pdc_pdt_init(void)
}
for (i = 0; i < pdt_status.pdt_entries; i++) {
if (i < 20)
pr_warn("PDT: BAD PAGE #%d at 0x%08lx (error_type = %lu)\n",
i,
pdt_entry[i] & PAGE_MASK,
pdt_entry[i] & 1);
struct pdc_pat_mem_phys_mem_location loc;
/* get DIMM slot number */
loc.dimm_slot = 0xff;
#ifdef CONFIG_64BIT
pdc_pat_mem_get_dimm_phys_location(&loc, pdt_entry[i]);
#endif
pr_warn("PDT: BAD PAGE #%d at 0x%08lx, "
"DIMM slot %02x (error_type = %lu)\n",
i,
pdt_entry[i] & PAGE_MASK,
loc.dimm_slot,
pdt_entry[i] & 1);
/* mark memory page bad */
memblock_reserve(pdt_entry[i] & PAGE_MASK, PAGE_SIZE);
......
arch/parisc/kernel/process.c
浏览文件 @ 29fda25a
......@@ -53,6 +53,7 @@
#include <linux/uaccess.h>
#include <linux/rcupdate.h>
#include <linux/random.h>
#include <linux/nmi.h>
#include <asm/io.h>
#include <asm/asm-offsets.h>
......@@ -145,6 +146,7 @@ void machine_power_off(void)
/* prevent soft lockup/stalled CPU messages for endless loop. */
rcu_sysrq_start();
lockup_detector_suspend();
for (;;);
}
......
arch/parisc/kernel/vmlinux.lds.S
浏览文件 @ 29fda25a
......@@ -78,6 +78,8 @@ SECTIONS
*(.text.sys_exit)
*(.text.do_sigaltstack)
*(.text.do_fork)
*(.text.div)
*($$*) /* millicode routines */
*(.text.*)
*(.fixup)
*(.lock.text) /* out-of-line lock text */
......
arch/powerpc/Makefile
浏览文件 @ 29fda25a
......@@ -59,6 +59,19 @@ machine-$(CONFIG_PPC64) += 64
machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
UTS_MACHINE := $(subst $(space),,$(machine-y))
# XXX This needs to be before we override LD below
ifdef CONFIG_PPC32
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
else
ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
# Have the linker provide sfpr if possible.
# There is a corresponding test in arch/powerpc/lib/Makefile
KBUILD_LDFLAGS_MODULE += --save-restore-funcs
else
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
endif
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
override LD += -EL
LDEMULATION := lppc
......@@ -190,18 +203,6 @@ else
CHECKFLAGS += -D__LITTLE_ENDIAN__
endif
ifdef CONFIG_PPC32
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
else
ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
# Have the linker provide sfpr if possible.
# There is a corresponding test in arch/powerpc/lib/Makefile
KBUILD_LDFLAGS_MODULE += --save-restore-funcs
else
KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
endif
endif
ifeq ($(CONFIG_476FPE_ERR46),y)
KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
......
arch/powerpc/include/asm/book3s/64/hash.h
浏览文件 @ 29fda25a
......@@ -91,6 +91,7 @@ static inline int hash__pgd_bad(pgd_t pgd)
}
#ifdef CONFIG_STRICT_KERNEL_RWX
extern void hash__mark_rodata_ro(void);
extern void hash__mark_initmem_nx(void);
#endif
extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
......
arch/powerpc/include/asm/book3s/64/mmu.h
浏览文件 @ 29fda25a
......@@ -59,13 +59,14 @@ extern struct patb_entry *partition_tb;
#define PRTS_MASK 0x1f /* process table size field */
#define PRTB_MASK 0x0ffffffffffff000UL
/*
* Limit process table to PAGE_SIZE table. This
* also limit the max pid we can support.
* MAX_USER_CONTEXT * 16 bytes of space.
*/
#define PRTB_SIZE_SHIFT (CONTEXT_BITS + 4)
#define PRTB_ENTRIES (1ul << CONTEXT_BITS)
/* Number of supported PID bits */
extern unsigned int mmu_pid_bits;
/* Base PID to allocate from */
extern unsigned int mmu_base_pid;
#define PRTB_SIZE_SHIFT (mmu_pid_bits + 4)
#define PRTB_ENTRIES (1ul << mmu_pid_bits)
/*
* Power9 currently only support 64K partition table size.
......
arch/powerpc/include/asm/book3s/64/pgtable.h
浏览文件 @ 29fda25a
......@@ -1192,5 +1192,6 @@ static inline const int pud_pfn(pud_t pud)
BUILD_BUG();
return 0;
}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */
arch/powerpc/include/asm/book3s/64/radix.h
浏览文件 @ 29fda25a
......@@ -118,6 +118,7 @@
#ifdef CONFIG_STRICT_KERNEL_RWX
extern void radix__mark_rodata_ro(void);
extern void radix__mark_initmem_nx(void);
#endif
static inline unsigned long __radix_pte_update(pte_t *ptep, unsigned long clr,
......
arch/powerpc/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -18,7 +18,7 @@
#include <asm/asm-offsets.h>
#ifdef CONFIG_DEBUG_BUGVERBOSE
.macro EMIT_BUG_ENTRY addr,file,line,flags
.section __bug_table,"a"
.section __bug_table,"aw"
5001: PPC_LONG \addr, 5002f
.short \line, \flags
.org 5001b+BUG_ENTRY_SIZE
......@@ -29,7 +29,7 @@
.endm
#else
.macro EMIT_BUG_ENTRY addr,file,line,flags
.section __bug_table,"a"
.section __bug_table,"aw"
5001: PPC_LONG \addr
.short \flags
.org 5001b+BUG_ENTRY_SIZE
......@@ -42,14 +42,14 @@
sizeof(struct bug_entry), respectively */
#ifdef CONFIG_DEBUG_BUGVERBOSE
#define _EMIT_BUG_ENTRY \
".section __bug_table,\"a\"\n" \
".section __bug_table,\"aw\"\n" \
"2:\t" PPC_LONG "1b, %0\n" \
"\t.short %1, %2\n" \
".org 2b+%3\n" \
".previous\n"
#else
#define _EMIT_BUG_ENTRY \
".section __bug_table,\"a\"\n" \
".section __bug_table,\"aw\"\n" \
"2:\t" PPC_LONG "1b\n" \
"\t.short %2\n" \
".org 2b+%3\n" \
......
arch/powerpc/include/asm/mmu_context.h
浏览文件 @ 29fda25a
......@@ -45,7 +45,7 @@ extern void set_context(unsigned long id, pgd_t *pgd);
#ifdef CONFIG_PPC_BOOK3S_64
extern void radix__switch_mmu_context(struct mm_struct *prev,
struct mm_struct *next);
struct mm_struct *next);
static inline void switch_mmu_context(struct mm_struct *prev,
struct mm_struct *next,
struct task_struct *tsk)
......@@ -67,6 +67,12 @@ extern void __destroy_context(unsigned long context_id);
extern void mmu_context_init(void);
#endif
#if defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE) && defined(CONFIG_PPC_RADIX_MMU)
extern void radix_kvm_prefetch_workaround(struct mm_struct *mm);
#else
static inline void radix_kvm_prefetch_workaround(struct mm_struct *mm) { }
#endif
extern void switch_cop(struct mm_struct *next);
extern int use_cop(unsigned long acop, struct mm_struct *mm);
extern void drop_cop(unsigned long acop, struct mm_struct *mm);
......@@ -79,9 +85,13 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
struct mm_struct *next,
struct task_struct *tsk)
{
bool new_on_cpu = false;
/* Mark this context has been used on the new CPU */
if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next)))
if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next))) {
cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
new_on_cpu = true;
}
/* 32-bit keeps track of the current PGDIR in the thread struct */
#ifdef CONFIG_PPC32
......@@ -109,6 +119,10 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
if (cpu_has_feature(CPU_FTR_ALTIVEC))
asm volatile ("dssall");
#endif /* CONFIG_ALTIVEC */
if (new_on_cpu)
radix_kvm_prefetch_workaround(next);
/*
* The actual HW switching method differs between the various
* sub architectures. Out of line for now
......
arch/powerpc/include/asm/pgtable.h
浏览文件 @ 29fda25a
......@@ -80,6 +80,13 @@ unsigned long vmalloc_to_phys(void *vmalloc_addr);
void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
void pgtable_cache_init(void);
#ifdef CONFIG_STRICT_KERNEL_RWX
void mark_initmem_nx(void);
#else
static inline void mark_initmem_nx(void) { }
#endif
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PGTABLE_H */
arch/powerpc/include/uapi/asm/ioctls.h
浏览文件 @ 29fda25a
......@@ -100,7 +100,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG 0x5453
#define TIOCSERGWILD 0x5454
......
arch/powerpc/kernel/exceptions-64s.S
浏览文件 @ 29fda25a
......@@ -824,7 +824,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
* r3 volatile parameter and return value for status
* r4-r10 volatile input and output value
* r11 volatile hypercall number and output value
* r12 volatile
* r12 volatile input and output value
* r13-r31 nonvolatile
* LR nonvolatile
* CTR volatile
......@@ -834,25 +834,26 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
* Other registers nonvolatile
*
* The intersection of volatile registers that don't contain possible
* inputs is: r12, cr0, xer, ctr. We may use these as scratch regs
* upon entry without saving.
* inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
* without saving, though xer is not a good idea to use, as hardware may
* interpret some bits so it may be costly to change them.
*/
#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
/*
* There is a little bit of juggling to get syscall and hcall
* working well. Save r10 in ctr to be restored in case it is a
* hcall.
* working well. Save r13 in ctr to avoid using SPRG scratch
* register.
*
* Userspace syscalls have already saved the PPR, hcalls must save
* it before setting HMT_MEDIUM.
*/
#define SYSCALL_KVMTEST \
mr r12,r13; \
mtctr r13; \
GET_PACA(r13); \
mtctr r10; \
std r10,PACA_EXGEN+EX_R10(r13); \
KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \
HMT_MEDIUM; \
mr r9,r12; \
mfctr r9;
#else
#define SYSCALL_KVMTEST \
......@@ -935,8 +936,8 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100)
* This is a hcall, so register convention is as above, with these
* differences:
* r13 = PACA
* r12 = orig r13
* ctr = orig r10
* ctr = orig r13
* orig r10 saved in PACA
*/
TRAMP_KVM_BEGIN(do_kvm_0xc00)
/*
......@@ -944,14 +945,13 @@ TRAMP_KVM_BEGIN(do_kvm_0xc00)
* HMT_MEDIUM. That allows the KVM code to save that value into the
* guest state (it is the guest's PPR value).
*/
OPT_GET_SPR(r0, SPRN_PPR, CPU_FTR_HAS_PPR)
OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR)
HMT_MEDIUM
OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r0, CPU_FTR_HAS_PPR)
OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR)
mfctr r10
SET_SCRATCH0(r12)
SET_SCRATCH0(r10)
std r9,PACA_EXGEN+EX_R9(r13)
mfcr r9
std r10,PACA_EXGEN+EX_R10(r13)
KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
#endif
......
arch/powerpc/kernel/idle_book3s.S
浏览文件 @ 29fda25a
......@@ -30,6 +30,7 @@
* Use unused space in the interrupt stack to save and restore
* registers for winkle support.
*/
#define _MMCR0 GPR0
#define _SDR1 GPR3
#define _PTCR GPR3
#define _RPR GPR4
......@@ -272,6 +273,14 @@ power_enter_stop:
b pnv_wakeup_noloss
.Lhandle_esl_ec_set:
/*
* POWER9 DD2 can incorrectly set PMAO when waking up after a
* state-loss idle. Saving and restoring MMCR0 over idle is a
* workaround.
*/
mfspr r4,SPRN_MMCR0
std r4,_MMCR0(r1)
/*
* Check if the requested state is a deep idle state.
*/
......@@ -450,10 +459,14 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
pnv_restore_hyp_resource_arch300:
/*
* Workaround for POWER9, if we lost resources, the ERAT
* might have been mixed up and needs flushing.
* might have been mixed up and needs flushing. We also need
* to reload MMCR0 (see comment above).
*/
blt cr3,1f
PPC_INVALIDATE_ERAT
ld r1,PACAR1(r13)
ld r4,_MMCR0(r1)
mtspr SPRN_MMCR0,r4
1:
/*
* POWER ISA 3. Use PSSCR to determine if we
......
arch/powerpc/kvm/book3s_64_mmu_hv.c
浏览文件 @ 29fda25a
......@@ -164,8 +164,10 @@ long kvmppc_alloc_reset_hpt(struct kvm *kvm, int order)
goto out;
}
if (kvm->arch.hpt.virt)
if (kvm->arch.hpt.virt) {
kvmppc_free_hpt(&kvm->arch.hpt);
kvmppc_rmap_reset(kvm);
}
err = kvmppc_allocate_hpt(&info, order);
if (err < 0)
......
arch/powerpc/kvm/book3s_hv.c
浏览文件 @ 29fda25a
......@@ -3211,6 +3211,8 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
run->fail_entry.hardware_entry_failure_reason = 0;
return -EINVAL;
}
/* Enable TM so we can read the TM SPRs */
mtmsr(mfmsr() | MSR_TM);
current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
current->thread.tm_texasr = mfspr(SPRN_TEXASR);
......
arch/powerpc/kvm/book3s_hv_rmhandlers.S
浏览文件 @ 29fda25a
......@@ -1443,12 +1443,14 @@ mc_cont:
ori r6,r6,1
mtspr SPRN_CTRLT,r6
4:
/* Read the guest SLB and save it away */
/* Check if we are running hash or radix and store it in cr2 */
ld r5, VCPU_KVM(r9)
lbz r0, KVM_RADIX(r5)
cmpwi r0, 0
cmpwi cr2,r0,0
/* Read the guest SLB and save it away */
li r5, 0
bne 3f /* for radix, save 0 entries */
bne cr2, 3f /* for radix, save 0 entries */
lwz r0,VCPU_SLB_NR(r9) /* number of entries in SLB */
mtctr r0
li r6,0
......@@ -1712,11 +1714,6 @@ BEGIN_FTR_SECTION_NESTED(96)
END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
22:
/* Clear out SLB */
li r5,0
slbmte r5,r5
slbia
ptesync
/* Restore host values of some registers */
BEGIN_FTR_SECTION
......@@ -1737,10 +1734,56 @@ BEGIN_FTR_SECTION
mtspr SPRN_PID, r7
mtspr SPRN_IAMR, r8
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
#ifdef CONFIG_PPC_RADIX_MMU
/*
* Are we running hash or radix ?
*/
beq cr2,3f
/* Radix: Handle the case where the guest used an illegal PID */
LOAD_REG_ADDR(r4, mmu_base_pid)
lwz r3, VCPU_GUEST_PID(r9)
lwz r5, 0(r4)
cmpw cr0,r3,r5
blt 2f
/*
* Illegal PID, the HW might have prefetched and cached in the TLB
* some translations for the LPID 0 / guest PID combination which
* Linux doesn't know about, so we need to flush that PID out of
* the TLB. First we need to set LPIDR to 0 so tlbiel applies to
* the right context.
*/
li r0,0
mtspr SPRN_LPID,r0
isync
/* Then do a congruence class local flush */
ld r6,VCPU_KVM(r9)
lwz r0,KVM_TLB_SETS(r6)
mtctr r0
li r7,0x400 /* IS field = 0b01 */
ptesync
sldi r0,r3,32 /* RS has PID */
1: PPC_TLBIEL(7,0,2,1,1) /* RIC=2, PRS=1, R=1 */
addi r7,r7,0x1000
bdnz 1b
ptesync
2: /* Flush the ERAT on radix P9 DD1 guest exit */
BEGIN_FTR_SECTION
PPC_INVALIDATE_ERAT
END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1)
b 4f
#endif /* CONFIG_PPC_RADIX_MMU */
/* Hash: clear out SLB */
3: li r5,0
slbmte r5,r5
slbia
ptesync
4:
/*
* POWER7/POWER8 guest -> host partition switch code.
* We don't have to lock against tlbies but we do
......
arch/powerpc/mm/mem.c
浏览文件 @ 29fda25a
......@@ -402,6 +402,7 @@ void __init mem_init(void)
void free_initmem(void)
{
ppc_md.progress = ppc_printk_progress;
mark_initmem_nx();
free_initmem_default(POISON_FREE_INITMEM);
}
......
arch/powerpc/mm/mmu_context_book3s64.c
浏览文件 @ 29fda25a
......@@ -126,9 +126,10 @@ static int hash__init_new_context(struct mm_struct *mm)
static int radix__init_new_context(struct mm_struct *mm)
{
unsigned long rts_field;
int index;
int index, max_id;
index = alloc_context_id(1, PRTB_ENTRIES - 1);
max_id = (1 << mmu_pid_bits) - 1;
index = alloc_context_id(mmu_base_pid, max_id);
if (index < 0)
return index;
......
arch/powerpc/mm/pgtable-hash64.c
浏览文件 @ 29fda25a
......@@ -425,33 +425,51 @@ int hash__has_transparent_hugepage(void)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#ifdef CONFIG_STRICT_KERNEL_RWX
void hash__mark_rodata_ro(void)
static bool hash__change_memory_range(unsigned long start, unsigned long end,
unsigned long newpp)
{
unsigned long start = (unsigned long)_stext;
unsigned long end = (unsigned long)__init_begin;
unsigned long idx;
unsigned int step, shift;
unsigned long newpp = PP_RXXX;
shift = mmu_psize_defs[mmu_linear_psize].shift;
step = 1 << shift;
start = ((start + step - 1) >> shift) << shift;
end = (end >> shift) << shift;
start = ALIGN_DOWN(start, step);
end = ALIGN(end, step); // aligns up
pr_devel("marking ro start %lx, end %lx, step %x\n",
start, end, step);
if (start >= end)
return false;
if (start == end) {
pr_warn("could not set rodata ro, relocate the start"
" of the kernel to a 0x%x boundary\n", step);
return;
}
pr_debug("Changing page protection on range 0x%lx-0x%lx, to 0x%lx, step 0x%x\n",
start, end, newpp, step);
for (idx = start; idx < end; idx += step)
/* Not sure if we can do much with the return value */
mmu_hash_ops.hpte_updateboltedpp(newpp, idx, mmu_linear_psize,
mmu_kernel_ssize);
return true;
}
void hash__mark_rodata_ro(void)
{
unsigned long start, end;
start = (unsigned long)_stext;
end = (unsigned long)__init_begin;
WARN_ON(!hash__change_memory_range(start, end, PP_RXXX));
}
void hash__mark_initmem_nx(void)
{
unsigned long start, end, pp;
start = (unsigned long)__init_begin;
end = (unsigned long)__init_end;
pp = htab_convert_pte_flags(pgprot_val(PAGE_KERNEL));
WARN_ON(!hash__change_memory_range(start, end, pp));
}
#endif
arch/powerpc/mm/pgtable-radix.c
浏览文件 @ 29fda25a
......@@ -25,6 +25,9 @@
#include <trace/events/thp.h>
unsigned int mmu_pid_bits;
unsigned int mmu_base_pid;
static int native_register_process_table(unsigned long base, unsigned long pg_sz,
unsigned long table_size)
{
......@@ -112,10 +115,9 @@ int radix__map_kernel_page(unsigned long ea, unsigned long pa,
}
#ifdef CONFIG_STRICT_KERNEL_RWX
void radix__mark_rodata_ro(void)
void radix__change_memory_range(unsigned long start, unsigned long end,
unsigned long clear)
{
unsigned long start = (unsigned long)_stext;
unsigned long end = (unsigned long)__init_begin;
unsigned long idx;
pgd_t *pgdp;
pud_t *pudp;
......@@ -125,7 +127,8 @@ void radix__mark_rodata_ro(void)
start = ALIGN_DOWN(start, PAGE_SIZE);
end = PAGE_ALIGN(end); // aligns up
pr_devel("marking ro start %lx, end %lx\n", start, end);
pr_debug("Changing flags on range %lx-%lx removing 0x%lx\n",
start, end, clear);
for (idx = start; idx < end; idx += PAGE_SIZE) {
pgdp = pgd_offset_k(idx);
......@@ -147,11 +150,29 @@ void radix__mark_rodata_ro(void)
if (!ptep)
continue;
update_the_pte:
radix__pte_update(&init_mm, idx, ptep, _PAGE_WRITE, 0, 0);
radix__pte_update(&init_mm, idx, ptep, clear, 0, 0);
}
radix__flush_tlb_kernel_range(start, end);
}
void radix__mark_rodata_ro(void)
{
unsigned long start, end;
start = (unsigned long)_stext;
end = (unsigned long)__init_begin;
radix__change_memory_range(start, end, _PAGE_WRITE);
}
void radix__mark_initmem_nx(void)
{
unsigned long start = (unsigned long)__init_begin;
unsigned long end = (unsigned long)__init_end;
radix__change_memory_range(start, end, _PAGE_EXEC);
}
#endif /* CONFIG_STRICT_KERNEL_RWX */
static inline void __meminit print_mapping(unsigned long start,
......@@ -243,11 +264,34 @@ static void __init radix_init_pgtable(void)
for_each_memblock(memory, reg)
WARN_ON(create_physical_mapping(reg->base,
reg->base + reg->size));
/* Find out how many PID bits are supported */
if (cpu_has_feature(CPU_FTR_HVMODE)) {
if (!mmu_pid_bits)
mmu_pid_bits = 20;
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
/*
* When KVM is possible, we only use the top half of the
* PID space to avoid collisions between host and guest PIDs
* which can cause problems due to prefetch when exiting the
* guest with AIL=3
*/
mmu_base_pid = 1 << (mmu_pid_bits - 1);
#else
mmu_base_pid = 1;
#endif
} else {
/* The guest uses the bottom half of the PID space */
if (!mmu_pid_bits)
mmu_pid_bits = 19;
mmu_base_pid = 1;
}
/*
* Allocate Partition table and process table for the
* host.
*/
BUILD_BUG_ON_MSG((PRTB_SIZE_SHIFT > 36), "Process table size too large.");
BUG_ON(PRTB_SIZE_SHIFT > 36);
process_tb = early_alloc_pgtable(1UL << PRTB_SIZE_SHIFT);
/*
* Fill in the process table.
......@@ -321,6 +365,12 @@ static int __init radix_dt_scan_page_sizes(unsigned long node,
if (type == NULL || strcmp(type, "cpu") != 0)
return 0;
/* Find MMU PID size */
prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
if (prop && size == 4)
mmu_pid_bits = be32_to_cpup(prop);
/* Grab page size encodings */
prop = of_get_flat_dt_prop(node, "ibm,processor-radix-AP-encodings", &size);
if (!prop)
return 0;
......
arch/powerpc/mm/pgtable_64.c
浏览文件 @ 29fda25a
......@@ -505,4 +505,12 @@ void mark_rodata_ro(void)
else
hash__mark_rodata_ro();
}
void mark_initmem_nx(void)
{
if (radix_enabled())
radix__mark_initmem_nx();
else
hash__mark_initmem_nx();
}
#endif
arch/powerpc/mm/subpage-prot.c
浏览文件 @ 29fda25a
......@@ -36,7 +36,7 @@ void subpage_prot_free(struct mm_struct *mm)
}
}
addr = 0;
for (i = 0; i < 2; ++i) {
for (i = 0; i < (TASK_SIZE_USER64 >> 43); ++i) {
p = spt->protptrs[i];
if (!p)
continue;
......
arch/powerpc/mm/tlb-radix.c
浏览文件 @ 29fda25a
......@@ -12,12 +12,12 @@
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/memblock.h>
#include <asm/ppc-opcode.h>
#include <asm/ppc-opcode.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/trace.h>
#include <asm/cputhreads.h>
#define RIC_FLUSH_TLB 0
#define RIC_FLUSH_PWC 1
......@@ -454,3 +454,44 @@ void radix__flush_tlb_pte_p9_dd1(unsigned long old_pte, struct mm_struct *mm,
else
radix__flush_tlb_page_psize(mm, address, mmu_virtual_psize);
}
#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
extern void radix_kvm_prefetch_workaround(struct mm_struct *mm)
{
unsigned int pid = mm->context.id;
if (unlikely(pid == MMU_NO_CONTEXT))
return;
/*
* If this context hasn't run on that CPU before and KVM is
* around, there's a slim chance that the guest on another
* CPU just brought in obsolete translation into the TLB of
* this CPU due to a bad prefetch using the guest PID on
* the way into the hypervisor.
*
* We work around this here. If KVM is possible, we check if
* any sibling thread is in KVM. If it is, the window may exist
* and thus we flush that PID from the core.
*
* A potential future improvement would be to mark which PIDs
* have never been used on the system and avoid it if the PID
* is new and the process has no other cpumask bit set.
*/
if (cpu_has_feature(CPU_FTR_HVMODE) && radix_enabled()) {
int cpu = smp_processor_id();
int sib = cpu_first_thread_sibling(cpu);
bool flush = false;
for (; sib <= cpu_last_thread_sibling(cpu) && !flush; sib++) {
if (sib == cpu)
continue;
if (paca[sib].kvm_hstate.kvm_vcpu)
flush = true;
}
if (flush)
_tlbiel_pid(pid, RIC_FLUSH_ALL);
}
}
EXPORT_SYMBOL_GPL(radix_kvm_prefetch_workaround);
#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */
arch/powerpc/platforms/powernv/opal.c
浏览文件 @ 29fda25a
......@@ -78,7 +78,7 @@ void opal_configure_cores(void)
* ie. Host hash supports hash guests
* Host radix supports hash/radix guests
*/
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
if (early_cpu_has_feature(CPU_FTR_ARCH_300)) {
reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH;
if (early_radix_enabled())
reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX;
......
arch/powerpc/platforms/pseries/reconfig.c
浏览文件 @ 29fda25a
......@@ -82,7 +82,6 @@ static int pSeries_reconfig_remove_node(struct device_node *np)
of_detach_node(np);
of_node_put(parent);
of_node_put(np); /* Must decrement the refcount */
return 0;
}
......
arch/s390/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -14,7 +14,7 @@
".section .rodata.str,\"aMS\",@progbits,1\n" \
"2: .asciz \""__FILE__"\"\n" \
".previous\n" \
".section __bug_table,\"a\"\n" \
".section __bug_table,\"aw\"\n" \
"3: .long 1b-3b,2b-3b\n" \
" .short %0,%1\n" \
" .org 3b+%2\n" \
......@@ -30,7 +30,7 @@
asm volatile( \
"0: j 0b+2\n" \
"1:\n" \
".section __bug_table,\"a\"\n" \
".section __bug_table,\"aw\"\n" \
"2: .long 1b-2b\n" \
" .short %0\n" \
" .org 2b+%1\n" \
......
arch/s390/kernel/perf_cpum_sf.c
浏览文件 @ 29fda25a
......@@ -998,7 +998,7 @@ static int perf_push_sample(struct perf_event *event, struct sf_raw_sample *sfr)
psw_bits(regs.psw).ia = sfr->basic.ia;
psw_bits(regs.psw).dat = sfr->basic.T;
psw_bits(regs.psw).wait = sfr->basic.W;
psw_bits(regs.psw).per = sfr->basic.P;
psw_bits(regs.psw).pstate = sfr->basic.P;
psw_bits(regs.psw).as = sfr->basic.AS;
/*
......
arch/s390/kvm/kvm-s390.c
浏览文件 @ 29fda25a
......@@ -1324,7 +1324,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
{
uint8_t *keys;
uint64_t hva;
int i, r = 0;
int srcu_idx, i, r = 0;
if (args->flags != 0)
return -EINVAL;
......@@ -1342,6 +1342,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
return -ENOMEM;
down_read(&current->mm->mmap_sem);
srcu_idx = srcu_read_lock(&kvm->srcu);
for (i = 0; i < args->count; i++) {
hva = gfn_to_hva(kvm, args->start_gfn + i);
if (kvm_is_error_hva(hva)) {
......@@ -1353,6 +1354,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
if (r)
break;
}
srcu_read_unlock(&kvm->srcu, srcu_idx);
up_read(&current->mm->mmap_sem);
if (!r) {
......@@ -1370,7 +1372,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
{
uint8_t *keys;
uint64_t hva;
int i, r = 0;
int srcu_idx, i, r = 0;
if (args->flags != 0)
return -EINVAL;
......@@ -1396,6 +1398,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
goto out;
down_read(&current->mm->mmap_sem);
srcu_idx = srcu_read_lock(&kvm->srcu);
for (i = 0; i < args->count; i++) {
hva = gfn_to_hva(kvm, args->start_gfn + i);
if (kvm_is_error_hva(hva)) {
......@@ -1413,6 +1416,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
if (r)
break;
}
srcu_read_unlock(&kvm->srcu, srcu_idx);
up_read(&current->mm->mmap_sem);
out:
kvfree(keys);
......
arch/s390/mm/pgtable.c
浏览文件 @ 29fda25a
......@@ -591,11 +591,11 @@ void ptep_zap_key(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
unsigned long ptev;
pgste_t pgste;
/* Clear storage key */
/* Clear storage key ACC and F, but set R/C */
preempt_disable();
pgste = pgste_get_lock(ptep);
pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT |
PGSTE_GR_BIT | PGSTE_GC_BIT);
pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
pgste_val(pgste) |= PGSTE_GR_BIT | PGSTE_GC_BIT;
ptev = pte_val(*ptep);
if (!(ptev & _PAGE_INVALID) && (ptev & _PAGE_WRITE))
page_set_storage_key(ptev & PAGE_MASK, PAGE_DEFAULT_KEY, 1);
......
arch/sh/include/asm/bug.h
浏览文件 @ 29fda25a
......@@ -24,14 +24,14 @@
*/
#ifdef CONFIG_DEBUG_BUGVERBOSE
#define _EMIT_BUG_ENTRY \
"\t.pushsection __bug_table,\"a\"\n" \
"\t.pushsection __bug_table,\"aw\"\n" \
"2:\t.long 1b, %O1\n" \
"\t.short %O2, %O3\n" \
"\t.org 2b+%O4\n" \
"\t.popsection\n"
#else
#define _EMIT_BUG_ENTRY \
"\t.pushsection __bug_table,\"a\"\n" \
"\t.pushsection __bug_table,\"aw\"\n" \
"2:\t.long 1b\n" \
"\t.short %O3\n" \
"\t.org 2b+%O4\n" \
......
arch/sh/include/uapi/asm/ioctls.h
浏览文件 @ 29fda25a
......@@ -93,7 +93,7 @@
#define TIOCGPKT _IOR('T', 0x38, int) /* Get packet mode state */
#define TIOCGPTLCK _IOR('T', 0x39, int) /* Get Pty lock state */
#define TIOCGEXCL _IOR('T', 0x40, int) /* Get exclusive mode state */
#define TIOCGPTPEER _IOR('T', 0x41, int) /* Safely open the slave */
#define TIOCGPTPEER _IO('T', 0x41) /* Safely open the slave */
#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */
#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */
......
arch/sparc/include/uapi/asm/ioctls.h
浏览文件 @ 29fda25a
......@@ -88,7 +88,7 @@
#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */
#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */
#define TIOCSIG _IOW('t', 136, int) /* Generate signal on Pty slave */
#define TIOCGPTPEER _IOR('t', 137, int) /* Safely open the slave */
#define TIOCGPTPEER _IO('t', 137) /* Safely open the slave */
/* Little f */
#define FIOCLEX _IO('f', 1)
......
arch/x86/Kconfig.debug
浏览文件 @ 29fda25a
......@@ -348,6 +348,7 @@ config X86_DEBUG_FPU
config PUNIT_ATOM_DEBUG
tristate "ATOM Punit debug driver"
depends on PCI
select DEBUG_FS
select IOSF_MBI
---help---
......
arch/x86/boot/Makefile
浏览文件 @ 29fda25a
......@@ -73,12 +73,13 @@ UBSAN_SANITIZE := n
$(obj)/bzImage: asflags-y := $(SVGA_MODE)
quiet_cmd_image = BUILD $@
silent_redirect_image = >/dev/null
cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \
$(obj)/zoffset.h $@
$(obj)/zoffset.h $@ $($(quiet)redirect_image)
$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
@$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')'
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
......
arch/x86/boot/compressed/Makefile
浏览文件 @ 29fda25a
......@@ -34,6 +34,7 @@ KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mno-mmx -mno-sse
KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
GCOV_PROFILE := n
......
arch/x86/boot/string.c
浏览文件 @ 29fda25a
......@@ -16,6 +16,15 @@
#include "ctype.h"
#include "string.h"
/*
* Undef these macros so that the functions that we provide
* here will have the correct names regardless of how string.h
* may have chosen to #define them.
*/
#undef memcpy
#undef memset
#undef memcmp
int memcmp(const void *s1, const void *s2, size_t len)
{
bool diff;
......
arch/x86/configs/i386_defconfig
浏览文件 @ 29fda25a
# CONFIG_64BIT is not set
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......@@ -125,7 +124,6 @@ CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_MANGLE=y
......@@ -255,7 +253,6 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_EDAC=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
......
arch/x86/configs/x86_64_defconfig
浏览文件 @ 29fda25a
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......@@ -124,7 +123,6 @@ CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_MANGLE=y
......@@ -251,7 +249,6 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_EDAC=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
......
arch/x86/entry/entry_64.S
浏览文件 @ 29fda25a
......@@ -705,6 +705,7 @@ apicinterrupt X86_PLATFORM_IPI_VECTOR x86_platform_ipi smp_x86_platform_ipi
#ifdef CONFIG_HAVE_KVM
apicinterrupt3 POSTED_INTR_VECTOR kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi
apicinterrupt3 POSTED_INTR_NESTED_VECTOR kvm_posted_intr_nested_ipi smp_kvm_posted_intr_nested_ipi
#endif
#ifdef CONFIG_X86_MCE_THRESHOLD
......
arch/x86/events/core.c
浏览文件 @ 29fda25a
......@@ -191,8 +191,8 @@ static void release_pmc_hardware(void) {}
static bool check_hw_exists(void)
{
u64 val, val_fail, val_new= ~0;
int i, reg, reg_fail, ret = 0;
u64 val, val_fail = -1, val_new= ~0;
int i, reg, reg_fail = -1, ret = 0;
int bios_fail = 0;
int reg_safe = -1;
......
arch/x86/events/intel/core.c
浏览文件 @ 29fda25a
......@@ -1708,6 +1708,120 @@ static __initconst const u64 glm_hw_cache_extra_regs
},
};
static __initconst const u64 glp_hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(L1D)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
[C(RESULT_MISS)] = 0x0,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
[C(RESULT_MISS)] = 0x0,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0x0,
[C(RESULT_MISS)] = 0x0,
},
},
[C(L1I)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0x0380, /* ICACHE.ACCESSES */
[C(RESULT_MISS)] = 0x0280, /* ICACHE.MISSES */
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS)] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0x0,
[C(RESULT_MISS)] = 0x0,
},
},
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0x1b7, /* OFFCORE_RESPONSE */
[C(RESULT_MISS)] = 0x1b7, /* OFFCORE_RESPONSE */
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = 0x1b7, /* OFFCORE_RESPONSE */
[C(RESULT_MISS)] = 0x1b7, /* OFFCORE_RESPONSE */
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0x0,
[C(RESULT_MISS)] = 0x0,
},
},
[C(DTLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
[C(RESULT_MISS)] = 0xe08, /* DTLB_LOAD_MISSES.WALK_COMPLETED */
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
[C(RESULT_MISS)] = 0xe49, /* DTLB_STORE_MISSES.WALK_COMPLETED */
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0x0,
[C(RESULT_MISS)] = 0x0,
},
},
[C(ITLB)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0x00c0, /* INST_RETIRED.ANY_P */
[C(RESULT_MISS)] = 0x0481, /* ITLB.MISS */
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS)] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS)] = -1,
},
},
[C(BPU)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
[C(RESULT_MISS)] = 0x00c5, /* BR_MISP_RETIRED.ALL_BRANCHES */
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS)] = -1,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = -1,
[C(RESULT_MISS)] = -1,
},
},
};
static __initconst const u64 glp_hw_cache_extra_regs
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
[C(LL)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = GLM_DEMAND_READ|
GLM_LLC_ACCESS,
[C(RESULT_MISS)] = GLM_DEMAND_READ|
GLM_LLC_MISS,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = GLM_DEMAND_WRITE|
GLM_LLC_ACCESS,
[C(RESULT_MISS)] = GLM_DEMAND_WRITE|
GLM_LLC_MISS,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = 0x0,
[C(RESULT_MISS)] = 0x0,
},
},
};
#define KNL_OT_L2_HITE BIT_ULL(19) /* Other Tile L2 Hit */
#define KNL_OT_L2_HITF BIT_ULL(20) /* Other Tile L2 Hit */
#define KNL_MCDRAM_LOCAL BIT_ULL(21)
......@@ -3016,6 +3130,9 @@ static int hsw_hw_config(struct perf_event *event)
return 0;
}
static struct event_constraint counter0_constraint =
INTEL_ALL_EVENT_CONSTRAINT(0, 0x1);
static struct event_constraint counter2_constraint =
EVENT_CONSTRAINT(0, 0x4, 0);
......@@ -3037,6 +3154,21 @@ hsw_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
return c;
}
static struct event_constraint *
glp_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
struct perf_event *event)
{
struct event_constraint *c;
/* :ppp means to do reduced skid PEBS which is PMC0 only. */
if (event->attr.precise_ip == 3)
return &counter0_constraint;
c = intel_get_event_constraints(cpuc, idx, event);
return c;
}
/*
* Broadwell:
*
......@@ -3265,10 +3397,8 @@ static void intel_pmu_cpu_dying(int cpu)
static void intel_pmu_sched_task(struct perf_event_context *ctx,
bool sched_in)
{
if (x86_pmu.pebs_active)
intel_pmu_pebs_sched_task(ctx, sched_in);
if (x86_pmu.lbr_nr)
intel_pmu_lbr_sched_task(ctx, sched_in);
intel_pmu_pebs_sched_task(ctx, sched_in);
intel_pmu_lbr_sched_task(ctx, sched_in);
}
PMU_FORMAT_ATTR(offcore_rsp, "config1:0-63");
......@@ -3838,6 +3968,32 @@ __init int intel_pmu_init(void)
pr_cont("Goldmont events, ");
break;
case INTEL_FAM6_ATOM_GEMINI_LAKE:
memcpy(hw_cache_event_ids, glp_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, glp_hw_cache_extra_regs,
sizeof(hw_cache_extra_regs));
intel_pmu_lbr_init_skl();
x86_pmu.event_constraints = intel_slm_event_constraints;
x86_pmu.pebs_constraints = intel_glp_pebs_event_constraints;
x86_pmu.extra_regs = intel_glm_extra_regs;
/*
* It's recommended to use CPU_CLK_UNHALTED.CORE_P + NPEBS
* for precise cycles.
*/
x86_pmu.pebs_aliases = NULL;
x86_pmu.pebs_prec_dist = true;
x86_pmu.lbr_pt_coexist = true;
x86_pmu.flags |= PMU_FL_HAS_RSP_1;
x86_pmu.get_event_constraints = glp_get_event_constraints;
x86_pmu.cpu_events = glm_events_attrs;
/* Goldmont Plus has 4-wide pipeline */
event_attr_td_total_slots_scale_glm.event_str = "4";
pr_cont("Goldmont plus events, ");
break;
case INTEL_FAM6_WESTMERE:
case INTEL_FAM6_WESTMERE_EP:
case INTEL_FAM6_WESTMERE_EX:
......
arch/x86/events/intel/cstate.c
浏览文件 @ 29fda25a
......@@ -40,16 +40,16 @@
* Model specific counters:
* MSR_CORE_C1_RES: CORE C1 Residency Counter
* perf code: 0x00
* Available model: SLM,AMT
* Available model: SLM,AMT,GLM
* Scope: Core (each processor core has a MSR)
* MSR_CORE_C3_RESIDENCY: CORE C3 Residency Counter
* perf code: 0x01
* Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL
* Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,GLM
* Scope: Core
* MSR_CORE_C6_RESIDENCY: CORE C6 Residency Counter
* perf code: 0x02
* Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW
* SKL,KNL
* SKL,KNL,GLM
* Scope: Core
* MSR_CORE_C7_RESIDENCY: CORE C7 Residency Counter
* perf code: 0x03
......@@ -57,16 +57,17 @@
* Scope: Core
* MSR_PKG_C2_RESIDENCY: Package C2 Residency Counter.
* perf code: 0x00
* Available model: SNB,IVB,HSW,BDW,SKL,KNL
* Available model: SNB,IVB,HSW,BDW,SKL,KNL,GLM
* Scope: Package (physical package)
* MSR_PKG_C3_RESIDENCY: Package C3 Residency Counter.
* perf code: 0x01
* Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,KNL
* GLM
* Scope: Package (physical package)
* MSR_PKG_C6_RESIDENCY: Package C6 Residency Counter.
* perf code: 0x02
* Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW
* SKL,KNL
* SKL,KNL,GLM
* Scope: Package (physical package)
* MSR_PKG_C7_RESIDENCY: Package C7 Residency Counter.
* perf code: 0x03
......@@ -82,7 +83,7 @@
* Scope: Package (physical package)
* MSR_PKG_C10_RESIDENCY: Package C10 Residency Counter.
* perf code: 0x06
* Available model: HSW ULT only
* Available model: HSW ULT, GLM
* Scope: Package (physical package)
*
*/
......@@ -504,6 +505,17 @@ static const struct cstate_model knl_cstates __initconst = {
};
static const struct cstate_model glm_cstates __initconst = {
.core_events = BIT(PERF_CSTATE_CORE_C1_RES) |
BIT(PERF_CSTATE_CORE_C3_RES) |
BIT(PERF_CSTATE_CORE_C6_RES),
.pkg_events = BIT(PERF_CSTATE_PKG_C2_RES) |
BIT(PERF_CSTATE_PKG_C3_RES) |
BIT(PERF_CSTATE_PKG_C6_RES) |
BIT(PERF_CSTATE_PKG_C10_RES),
};
#define X86_CSTATES_MODEL(model, states) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, (unsigned long) &(states) }
......@@ -546,6 +558,8 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
X86_CSTATES_MODEL(INTEL_FAM6_XEON_PHI_KNL, knl_cstates),
X86_CSTATES_MODEL(INTEL_FAM6_XEON_PHI_KNM, knl_cstates),
X86_CSTATES_MODEL(INTEL_FAM6_ATOM_GOLDMONT, glm_cstates),
{ },
};
MODULE_DEVICE_TABLE(x86cpu, intel_cstates_match);
......
arch/x86/events/intel/ds.c
浏览文件 @ 29fda25a
......@@ -606,12 +606,6 @@ static inline void intel_pmu_drain_pebs_buffer(void)
x86_pmu.drain_pebs(&regs);
}
void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in)
{
if (!sched_in)
intel_pmu_drain_pebs_buffer();
}
/*
* PEBS
*/
......@@ -651,6 +645,12 @@ struct event_constraint intel_glm_pebs_event_constraints[] = {
EVENT_CONSTRAINT_END
};
struct event_constraint intel_glp_pebs_event_constraints[] = {
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_nehalem_pebs_event_constraints[] = {
INTEL_PLD_CONSTRAINT(0x100b, 0xf), /* MEM_INST_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
......@@ -816,6 +816,14 @@ static inline bool pebs_needs_sched_cb(struct cpu_hw_events *cpuc)
return cpuc->n_pebs && (cpuc->n_pebs == cpuc->n_large_pebs);
}
void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
if (!sched_in && pebs_needs_sched_cb(cpuc))
intel_pmu_drain_pebs_buffer();
}
static inline void pebs_update_threshold(struct cpu_hw_events *cpuc)
{
struct debug_store *ds = cpuc->ds;
......@@ -889,6 +897,8 @@ void intel_pmu_pebs_enable(struct perf_event *event)
if (hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) {
ds->pebs_event_reset[hwc->idx] =
(u64)(-hwc->sample_period) & x86_pmu.cntval_mask;
} else {
ds->pebs_event_reset[hwc->idx] = 0;
}
}
......
arch/x86/events/intel/lbr.c
浏览文件 @ 29fda25a
......@@ -380,8 +380,12 @@ static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx)
void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct x86_perf_task_context *task_ctx;
if (!cpuc->lbr_users)
return;
/*
* If LBR callstack feature is enabled and the stack was saved when
* the task was scheduled out, restore the stack. Otherwise flush
......
arch/x86/events/perf_event.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/bug.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/entry_arch.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/hardirq.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/hw_irq.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/io.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/irq_vectors.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/include/asm/mmu_context.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/acpi/boot.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/apic/io_apic.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/cpu/amd.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/devicetree.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/irq.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/irqinit.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/kprobes/core.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kernel/reboot.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kvm/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kvm/hyperv.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kvm/lapic.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kvm/vmx.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/kvm/x86.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/math-emu/Makefile
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/math-emu/fpu_emu.h
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/math-emu/reg_compare.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/platform/uv/tlb_uv.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/xen/smp_pv.c
浏览文件 @ 29fda25a
此差异已折叠。
arch/x86/xen/time.c
浏览文件 @ 29fda25a
此差异已折叠。
block/bfq-iosched.c
浏览文件 @ 29fda25a
此差异已折叠。
block/bfq-iosched.h
浏览文件 @ 29fda25a
此差异已折叠。
block/bfq-wf2q.c
浏览文件 @ 29fda25a
此差异已折叠。
block/blk-core.c
浏览文件 @ 29fda25a
此差异已折叠。
block/blk-mq-cpumap.c
浏览文件 @ 29fda25a
此差异已折叠。
crypto/authencesn.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/acpi/ec.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/acpi/internal.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/acpi/numa.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/acpi/sleep.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/android/binder.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/ata/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/ata/libata-core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/ata/libata-eh.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/ata/libata-scsi.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/ata/sata_rcar.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/base/dma-coherent.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/base/dma-mapping.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/block/nbd.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/block/virtio_blk.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/block/xen-blkfront.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/clocksource/timer-of.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/crypto/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/crypto/bcm/spu2.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/dax/super.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/dma-buf/dma-fence.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/dma-buf/sync_debug.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/dma-buf/sync_file.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/fsi/fsi-core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/drm_dp_helper.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/exynos/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/i915/gvt/display.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/i915/i915_vma.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/i915/intel_ddi.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/i915/intel_gvt.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/i915/intel_pm.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/imx/ipuv3-plane.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgf119.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/radeon/radeon_kfd.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/rockchip/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/vc4/vc4_crtc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/vmwgfx/vmwgfx_mob.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/gpu/host1x/dev.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/hid/hid-core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/hid/hid-ids.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/hid/hid-ortek.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/hid/usbhid/hid-core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/hv/channel.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/hwmon/applesmc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/ide/ide-timings.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/core/cma.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/hw/cxgb4/cq.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/hw/cxgb4/qp.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/hw/i40iw/i40iw.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/hw/mlx4/cm.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/hw/mlx5/mr.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/hw/qedr/verbs.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/infiniband/sw/rdmavt/qp.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/irqchip/irq-digicolor.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/irqchip/irq-gic-realview.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/irqchip/irq-mips-cpu.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/irqchip/irq-mips-gic.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/lightnvm/pblk-rb.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/lightnvm/pblk-read.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/lightnvm/pblk.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-bufio.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-integrity.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-raid.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-table.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-verity-fec.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-zoned-metadata.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-zoned-reclaim.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/dm-zoned-target.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/md.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/md.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/raid1-10.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/raid1.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/raid10.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/md/raid5.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/mmc/host/dw_mmc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/mmc/host/omap_hsmmc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/mmc/host/sunxi-mmc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/mux/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/mux/mux-core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/bonding/bond_main.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/ethernet/sun/sunhme.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/hyperv/netvsc_drv.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/irda/mcs7780.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/phy/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/phy/phy.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/ppp/pptp.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/team/team.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/tun.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/net/virtio_net.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/host/core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/host/fc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/host/pci.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/target/admin-cmd.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/target/configfs.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/target/core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/target/fc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvme/target/nvmet.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/nvmem/rockchip-efuse.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/of/irq.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/parisc/pdc_stable.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/perf/arm_pmu.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/perf/arm_pmu_platform.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/perf/qcom_l2_pmu.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/phy/broadcom/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/s390/cio/chp.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/scsi/hpsa.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/scsi/sg.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/scsi/smartpqi/smartpqi.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/spmi/spmi-pmic-arb.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/spmi/spmi.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/Makefile
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/sm750fb/sm750.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/speakup/main.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/speakup/spk_priv.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/speakup/spk_ttyio.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/Kconfig 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/Makefile 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/TODO 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/hgsmi_base.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/hgsmi_ch_setup.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/hgsmi_channels.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/hgsmi_defs.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/modesetting.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_drv.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_drv.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_err.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_fb.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_hgsmi.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_irq.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_main.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_mode.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_prime.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbox_ttm.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vboxvideo.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vboxvideo_guest.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vboxvideo_vbe.h 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/staging/vboxvideo/vbva_base.c 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
drivers/thunderbolt/switch.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/thunderbolt/tb.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/thunderbolt/tb_msgs.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/tty/pty.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/tty/serial/fsl_lpuart.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/tty/serial/imx.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/tty/serial/sh-sci.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/tty/serial/st-asc.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/class/cdc-acm.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/dwc2/gadget.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/dwc3/core.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/dwc3/dwc3-omap.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/dwc3/gadget.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/gadget/udc/Kconfig
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/pci-quirks.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/pci-quirks.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/xhci-hub.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/xhci-pci.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/xhci-ring.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/xhci.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/host/xhci.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/renesas_usbhs/common.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/storage/isd200.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/usb/typec/ucsi/ucsi.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/vhost/vhost.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/vhost/vhost.h
浏览文件 @ 29fda25a
此差异已折叠。
drivers/virtio/virtio_balloon.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/w1/masters/omap_hdq.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/w1/w1.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/xen/balloon.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/xen/events/events_base.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/xen/grant-table.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/xen/xen-balloon.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/xen/xen-selfballoon.c
浏览文件 @ 29fda25a
此差异已折叠。
drivers/xen/xenfs/super.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/btrfs/tree-log.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/btrfs/volumes.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/jfs/acl.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/jfs/resize.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/jfs/super.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/client.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/dir.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/file.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/filelayout/filelayout.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/mount_clnt.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/nfs3proc.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/nfs/pnfs_nfs.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/dir.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/inode.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/namei.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/overlayfs.h
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/readdir.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/super.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/overlayfs/util.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/xfs/libxfs/xfs_bmap.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/xfs/libxfs/xfs_btree.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/xfs/libxfs/xfs_dir2_data.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/xfs/libxfs/xfs_refcount.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/xfs/xfs_qm.c
浏览文件 @ 29fda25a
此差异已折叠。
fs/xfs/xfs_reflink.c
浏览文件 @ 29fda25a
此差异已折叠。
include/acpi/acpi_numa.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/dax.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/dma-fence.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/dma-mapping.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/ftrace.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/ipv6.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/irq.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/kvm_host.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/libata.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/mlx5/mlx5_ifc.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/nfs_fs.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/nvme-fc.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/nvme.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/perf/arm_pmu.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/phy.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/trace_events.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/usb/audio-v2.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/uuid.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/wait.h
浏览文件 @ 29fda25a
此差异已折叠。
include/linux/workqueue.h
浏览文件 @ 29fda25a
此差异已折叠。
include/net/sctp/sctp.h
浏览文件 @ 29fda25a
此差异已折叠。
include/net/udp.h
浏览文件 @ 29fda25a
此差异已折叠。
include/rdma/ib_addr.h
浏览文件 @ 29fda25a
此差异已折叠。
include/rdma/rdmavt_qp.h
浏览文件 @ 29fda25a
此差异已折叠。
include/uapi/asm-generic/ioctls.h
浏览文件 @ 29fda25a
此差异已折叠。
include/uapi/linux/usb/audio.h
浏览文件 @ 29fda25a
此差异已折叠。
include/xen/balloon.h
浏览文件 @ 29fda25a
此差异已折叠。
kernel/bpf/syscall.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/bpf/verifier.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/cgroup/cgroup-internal.h
浏览文件 @ 29fda25a
此差异已折叠。
kernel/cgroup/cgroup.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/events/core.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/irq/chip.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/irq/cpuhotplug.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/irq/internals.h
浏览文件 @ 29fda25a
此差异已折叠。
kernel/irq/pm.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/locking/rtmutex.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/sched/core.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/sched/cputime.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/sched/deadline.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/trace/ftrace.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/trace/ring_buffer.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/trace/trace.c
浏览文件 @ 29fda25a
此差异已折叠。
kernel/trace/trace.h
浏览文件 @ 29fda25a
此差异已折叠。
kernel/workqueue.c
浏览文件 @ 29fda25a
此差异已折叠。
lib/test_rhashtable.c
浏览文件 @ 29fda25a
此差异已折叠。
lib/test_uuid.c
浏览文件 @ 29fda25a
此差异已折叠。
net/core/dev_ioctl.c
浏览文件 @ 29fda25a
此差异已折叠。
net/core/netpoll.c
浏览文件 @ 29fda25a
此差异已折叠。
net/dccp/feat.c
浏览文件 @ 29fda25a
此差异已折叠。
net/dccp/ipv4.c
浏览文件 @ 29fda25a
此差异已折叠。
net/dccp/ipv6.c
浏览文件 @ 29fda25a
此差异已折叠。
net/dsa/dsa2.c
浏览文件 @ 29fda25a
此差异已折叠。
net/ipv4/fib_semantics.c
浏览文件 @ 29fda25a
此差异已折叠。
net/ipv4/tcp_output.c
浏览文件 @ 29fda25a
此差异已折叠。
net/ipv4/udp.c
浏览文件 @ 29fda25a
此差异已折叠。
net/ipv6/exthdrs.c
浏览文件 @ 29fda25a
此差异已折叠。
net/ipv6/ip6_output.c
浏览文件 @ 29fda25a
此差异已折叠。
net/ipv6/udp.c
浏览文件 @ 29fda25a
此差异已折叠。
net/openvswitch/conntrack.c
浏览文件 @ 29fda25a
此差异已折叠。
net/packet/af_packet.c
浏览文件 @ 29fda25a
此差异已折叠。
net/socket.c
浏览文件 @ 29fda25a
此差异已折叠。
net/sunrpc/xprtsock.c
浏览文件 @ 29fda25a
此差异已折叠。
samples/bpf/tcbpf2_kern.c
浏览文件 @ 29fda25a
此差异已折叠。
samples/bpf/test_tunnel_bpf.sh
浏览文件 @ 29fda25a
此差异已折叠。
scripts/dtc/dtx_diff
浏览文件 @ 29fda25a
此差异已折叠。
scripts/parse-maintainers.pl 0 → 100644
浏览文件 @ 29fda25a
此差异已折叠。
sound/pci/fm801.c
浏览文件 @ 29fda25a
此差异已折叠。
sound/pci/hda/patch_conexant.c
浏览文件 @ 29fda25a
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 29fda25a
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 29fda25a
此差异已折叠。
tools/kvm/kvm_stat/kvm_stat
浏览文件 @ 29fda25a
此差异已折叠。
tools/lib/bpf/bpf.c
浏览文件 @ 29fda25a
此差异已折叠。
tools/perf/ui/browser.c
浏览文件 @ 29fda25a
此差异已折叠。
tools/perf/util/evsel.c
浏览文件 @ 29fda25a
此差异已折叠。
tools/perf/util/machine.c
浏览文件 @ 29fda25a
此差异已折叠。
virt/kvm/kvm_main.c
浏览文件 @ 29fda25a
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或