Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Mostly simple overlapping changes.

For example, David Ahern's adjacency list revamp in 'net-next'
conflicted with an adjacency list traversal bug fix in 'net'.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

.mailmap

@@ -127,6 +127,7 @@ Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
+Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>

CREDITS

@@ -1864,10 +1864,11 @@ S: The Netherlands
 
 N: Martin Kepplinger
 E: martink@posteo.de
-E: martin.kepplinger@theobroma-systems.com
+E: martin.kepplinger@ginzinger.com
 W: http://www.martinkepplinger.com
 D: mma8452 accelerators iio driver
-D: Kernel cleanups
+D: pegasus_notetaker input driver
+D: Kernel fixes and cleanups
 S: Garnisonstraße 26
 S: 4020 Linz
 S: Austria

Documentation/00-INDEX

@@ -46,7 +46,8 @@ IRQ.txt
 Intel-IOMMU.txt
 	- basic info on the Intel IOMMU virtualization support.
 Makefile
-	- some files in Documentation dir are actually sample code to build
+	- This file does nothing. Removing it breaks make htmldocs and
+	  make distclean.
 ManagementStyle
 	- how to (attempt to) manage kernel hackers.
 RCU/

Documentation/80211/cfg80211.rst

+==================
+cfg80211 subsystem
+==================
+
+Device registration
+===================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Device registration
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_channel_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_channel
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_rate_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_rate
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_sta_ht_cap
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_supported_band
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_signal_type
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_params_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wireless_dev
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_new
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_register
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_unregister
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_free
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_name
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_dev
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_priv
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: priv_to_wiphy
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: set_wiphy_dev
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wdev_priv
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_iface_limit
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_iface_combination
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_check_combinations
+
+Actions and configuration
+=========================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Actions and configuration
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_ops
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: vif_params
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: key_params
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: survey_info_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: survey_info
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_beacon_data
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_ap_settings
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: station_parameters
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: rate_info_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: rate_info
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: station_info
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: monitor_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: mpath_info_flags
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: mpath_info
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: bss_parameters
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_txq_params
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_crypto_settings
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_auth_request
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_assoc_request
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_deauth_request
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_disassoc_request
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_ibss_params
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_connect_params
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_pmksa
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_rx_mlme_mgmt
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_auth_timeout
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_rx_assoc_resp
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_assoc_timeout
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_tx_mlme_mgmt
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_ibss_joined
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_connect_result
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_connect_bss
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_connect_timeout
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_roamed
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_disconnected
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_ready_on_channel
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_remain_on_channel_expired
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_new_sta
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_rx_mgmt
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_mgmt_tx_status
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_cqm_rssi_notify
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_cqm_pktloss_notify
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_michael_mic_failure
+
+Scanning and BSS list handling
+==============================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Scanning and BSS list handling
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_ssid
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_scan_request
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_scan_done
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_bss
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_inform_bss
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_inform_bss_frame_data
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_inform_bss_data
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_unlink_bss
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_find_ie
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_bss_get_ie
+
+Utility functions
+=================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Utility functions
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_channel_to_frequency
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_frequency_to_channel
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_get_channel
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_get_response_rate
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_hdrlen
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_get_hdrlen_from_skb
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_radiotap_iterator
+
+Data path helpers
+=================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Data path helpers
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_data_to_8023
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_data_from_8023
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: ieee80211_amsdu_to_8023s
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_classify8021d
+
+Regulatory enforcement infrastructure
+=====================================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Regulatory enforcement infrastructure
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: regulatory_hint
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_apply_custom_regulatory
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: freq_reg_info
+
+RFkill integration
+==================
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: RFkill integration
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_rfkill_set_hw_state
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_rfkill_start_polling
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: wiphy_rfkill_stop_polling
+
+Test mode
+=========
+
+.. kernel-doc:: include/net/cfg80211.h
+   :doc: Test mode
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_testmode_alloc_reply_skb
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_testmode_reply
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_testmode_alloc_event_skb
+
+.. kernel-doc:: include/net/cfg80211.h
+   :functions: cfg80211_testmode_event

Documentation/80211/conf.py

+# -*- coding: utf-8; mode: python -*-
+
+project = "Linux 802.11 Driver Developer's Guide"
+
+tags.add("subproject")

Documentation/80211/index.rst

+=====================================
+Linux 802.11 Driver Developer's Guide
+=====================================
+
+.. toctree::
+
+   introduction
+   cfg80211
+   mac80211
+   mac80211-advanced
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/80211/introduction.rst

+============
+Introduction
+============
+
+Explaining wireless 802.11 networking in the Linux kernel
+
+Copyright 2007-2009 Johannes Berg
+
+These books attempt to give a description of the various subsystems
+that play a role in 802.11 wireless networking in Linux. Since these
+books are for kernel developers they attempts to document the
+structures and functions used in the kernel as well as giving a
+higher-level overview.
+
+The reader is expected to be familiar with the 802.11 standard as
+published by the IEEE in 802.11-2007 (or possibly later versions).
+References to this standard will be given as "802.11-2007 8.1.5".

Documentation/80211/mac80211-advanced.rst

+=============================
+mac80211 subsystem (advanced)
+=============================
+
+Information contained within this part of the book is of interest only
+for advanced interaction of mac80211 with drivers to exploit more
+hardware capabilities and improve performance.
+
+LED support
+===========
+
+Mac80211 supports various ways of blinking LEDs. Wherever possible,
+device LEDs should be exposed as LED class devices and hooked up to the
+appropriate trigger, which will then be triggered appropriately by
+mac80211.
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_tx_led_name
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_rx_led_name
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_assoc_led_name
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_radio_led_name
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tpt_blink
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tpt_led_trigger_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_create_tpt_led_trigger
+
+Hardware crypto acceleration
+============================
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Hardware crypto acceleration
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: set_key_cmd
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_key_conf
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_key_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_tkip_p1k
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_tkip_p1k_iv
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_tkip_p2k
+
+Powersave support
+=================
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Powersave support
+
+Beacon filter support
+=====================
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Beacon filter support
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_beacon_loss
+
+Multiple queues and QoS support
+===============================
+
+TBD
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_queue_params
+
+Access point mode support
+=========================
+
+TBD
+
+Some parts of the if_conf should be discussed here instead
+
+Insert notes about VLAN interfaces with hw crypto here or in the hw
+crypto chapter.
+
+support for powersaving clients
+-------------------------------
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: AP support for powersaving clients
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_get_buffered_bc
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_beacon_get
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_sta_eosp
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_frame_release_type
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_sta_ps_transition
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_sta_ps_transition_ni
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_sta_set_buffered
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_sta_block_awake
+
+Supporting multiple virtual interfaces
+======================================
+
+TBD
+
+Note: WDS with identical MAC address should almost always be OK
+
+Insert notes about having multiple virtual interfaces with different MAC
+addresses here, note which configurations are supported by mac80211, add
+notes about supporting hw crypto with it.
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_iterate_active_interfaces
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_iterate_active_interfaces_atomic
+
+Station handling
+================
+
+TODO
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_sta
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: sta_notify_cmd
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_find_sta
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_find_sta_by_ifaddr
+
+Hardware scan offload
+=====================
+
+TBD
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_scan_completed
+
+Aggregation
+===========
+
+TX A-MPDU aggregation
+---------------------
+
+.. kernel-doc:: net/mac80211/agg-tx.c
+   :doc: TX A-MPDU aggregation
+
+.. WARNING: DOCPROC directive not supported: !Cnet/mac80211/agg-tx.c
+
+RX A-MPDU aggregation
+---------------------
+
+.. kernel-doc:: net/mac80211/agg-rx.c
+   :doc: RX A-MPDU aggregation
+
+.. WARNING: DOCPROC directive not supported: !Cnet/mac80211/agg-rx.c
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_ampdu_mlme_action
+
+Spatial Multiplexing Powersave (SMPS)
+=====================================
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Spatial multiplexing power save
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_request_smps
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_smps_mode
+
+TBD
+
+This part of the book describes the rate control algorithm interface and
+how it relates to mac80211 and drivers.
+
+Rate Control API
+================
+
+TBD
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_start_tx_ba_session
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_start_tx_ba_cb_irqsafe
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_stop_tx_ba_session
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_stop_tx_ba_cb_irqsafe
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rate_control_changed
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_rate_control
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: rate_control_send_low
+
+TBD
+
+This part of the book describes mac80211 internals.
+
+Key handling
+============
+
+Key handling basics
+-------------------
+
+.. kernel-doc:: net/mac80211/key.c
+   :doc: Key handling basics
+
+MORE TBD
+--------
+
+TBD
+
+Receive processing
+==================
+
+TBD
+
+Transmit processing
+===================
+
+TBD
+
+Station info handling
+=====================
+
+Programming information
+-----------------------
+
+.. kernel-doc:: net/mac80211/sta_info.h
+   :functions: sta_info
+
+.. kernel-doc:: net/mac80211/sta_info.h
+   :functions: ieee80211_sta_info_flags
+
+STA information lifetime rules
+------------------------------
+
+.. kernel-doc:: net/mac80211/sta_info.c
+   :doc: STA information lifetime rules
+
+Aggregation
+===========
+
+.. kernel-doc:: net/mac80211/sta_info.h
+   :functions: sta_ampdu_mlme
+
+.. kernel-doc:: net/mac80211/sta_info.h
+   :functions: tid_ampdu_tx
+
+.. kernel-doc:: net/mac80211/sta_info.h
+   :functions: tid_ampdu_rx
+
+Synchronisation
+===============
+
+TBD
+
+Locking, lots of RCU

Documentation/80211/mac80211.rst

+===========================
+mac80211 subsystem (basics)
+===========================
+
+You should read and understand the information contained within this
+part of the book while implementing a mac80211 driver. In some chapters,
+advanced usage is noted, those may be skipped if this isn't needed.
+
+This part of the book only covers station and monitor mode
+functionality, additional information required to implement the other
+modes is covered in the second part of the book.
+
+Basic hardware handling
+=======================
+
+TBD
+
+This chapter shall contain information on getting a hw struct allocated
+and registered with mac80211.
+
+Since it is required to allocate rates/modes before registering a hw
+struct, this chapter shall also contain information on setting up the
+rate/mode structs.
+
+Additionally, some discussion about the callbacks and the general
+programming model should be in here, including the definition of
+ieee80211_ops which will be referred to a lot.
+
+Finally, a discussion of hardware capabilities should be done with
+references to other parts of the book.
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_hw
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_hw_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: SET_IEEE80211_DEV
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: SET_IEEE80211_PERM_ADDR
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_ops
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_alloc_hw
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_register_hw
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_unregister_hw
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_free_hw
+
+PHY configuration
+=================
+
+TBD
+
+This chapter should describe PHY handling including start/stop callbacks
+and the various structures used.
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_conf
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_conf_flags
+
+Virtual interfaces
+==================
+
+TBD
+
+This chapter should describe virtual interface basics that are relevant
+to the driver (VLANs, MGMT etc are not.) It should explain the use of
+the add_iface/remove_iface callbacks as well as the interface
+configuration callbacks.
+
+Things related to AP mode should be discussed there.
+
+Things related to supporting multiple interfaces should be in the
+appropriate chapter, a BIG FAT note should be here about this though and
+the recommendation to allow only a single interface in STA mode at
+first!
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_vif
+
+Receive and transmit processing
+===============================
+
+what should be here
+-------------------
+
+TBD
+
+This should describe the receive and transmit paths in mac80211/the
+drivers as well as transmit status handling.
+
+Frame format
+------------
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Frame format
+
+Packet alignment
+----------------
+
+.. kernel-doc:: net/mac80211/rx.c
+   :doc: Packet alignment
+
+Calling into mac80211 from interrupts
+-------------------------------------
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Calling mac80211 from interrupts
+
+functions/definitions
+---------------------
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rx_status
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: mac80211_rx_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: mac80211_tx_info_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: mac80211_tx_control_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: mac80211_rate_control_flags
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_rate
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_info
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_info_clear_status
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rx
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rx_ni
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rx_irqsafe
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_status
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_status_ni
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_tx_status_irqsafe
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rts_get
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_rts_duration
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_ctstoself_get
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_ctstoself_duration
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_generic_frame_duration
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_wake_queue
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_stop_queue
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_wake_queues
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_stop_queues
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_queue_stopped
+
+Frame filtering
+===============
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: Frame filtering
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_filter_flags
+
+The mac80211 workqueue
+======================
+
+.. kernel-doc:: include/net/mac80211.h
+   :doc: mac80211 workqueue
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_queue_work
+
+.. kernel-doc:: include/net/mac80211.h
+   :functions: ieee80211_queue_delayed_work

Documentation/ABI/testing/sysfs-class-cxl

@@ -220,8 +220,11 @@ What:           /sys/class/cxl/<card>/reset
 Date:           October 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    write only
-                Writing 1 will issue a PERST to card which may cause the card
-                to reload the FPGA depending on load_image_on_perst.
+                Writing 1 will issue a PERST to card provided there are no
+                contexts active on any one of the card AFUs. This may cause
+                the card to reload the FPGA depending on load_image_on_perst.
+                Writing -1 will do a force PERST irrespective of any active
+                contexts on the card AFUs.
 Users:		https://github.com/ibm-capi/libcxl
 
 What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)

Documentation/DocBook/Makefile

@@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml  \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    80211.xml debugobjects.xml sh.xml regulator.xml \
+	    debugobjects.xml sh.xml regulator.xml \
 	    alsa-driver-api.xml writing-an-alsa-driver.xml \
 	    tracepoint.xml w1.xml \
 	    writing_musb_glue_layer.xml crypto-API.xml iio.xml

Documentation/Makefile

-subdir-y := accounting auxdisplay blackfin \
-	filesystems filesystems ia64 laptops mic misc-devices \
-	networking pcmcia prctl ptp timers vDSO watchdog
+subdir-y :=

Documentation/accounting/Makefile

-# List of programs to build
-hostprogs-y := getdelays
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_getdelays.o += -I$(objtree)/usr/include

Documentation/accounting/delay-accounting.txt

@@ -54,9 +54,9 @@ are sent to userspace without requiring a command. If it is the last exiting
 task of a thread group, the per-tgid statistics are also sent. More details
 are given in the taskstats interface description.
 
-The getdelays.c userspace utility in this directory allows simple commands to
-be run and the corresponding delay statistics to be displayed. It also serves
-as an example of using the taskstats interface.
+The getdelays.c userspace utility in tools/accounting directory allows simple
+commands to be run and the corresponding delay statistics to be displayed. It
+also serves as an example of using the taskstats interface.
 
 Usage
 -----

Documentation/arm/00-INDEX

@@ -8,8 +8,6 @@ Interrupts
 	- ARM Interrupt subsystem documentation
 IXP4xx
 	- Intel IXP4xx Network processor.
-Makefile
-	- Build sourcefiles as part of the Documentation-build for arm
 Netwinder
 	- Netwinder specific documentation
 Porting

Documentation/auxdisplay/Makefile

-# List of programs to build
-hostprogs-y := cfag12864b-example
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_cfag12864b-example.o += -I$(objtree)/usr/include

Documentation/auxdisplay/cfag12864b

@@ -101,5 +101,5 @@ Although the LCD won't get updated until the next refresh time arrives.
 Also, you can mmap the framebuffer: open & mmap, munmap & close...
 which is the best option for most uses.
 
-Check Documentation/auxdisplay/cfag12864b-example.c
+Check samples/auxdisplay/cfag12864b-example.c
 for a real working userspace complete program with usage examples.

Documentation/blackfin/00-INDEX

 00-INDEX
 	- This file
-Makefile
-	- Makefile for gptimers example file.
 bfin-gpio-notes.txt
 	- Notes in developing/using bfin-gpio driver.
 bfin-spi-notes.txt
 	- Notes for using bfin spi bus driver.
-gptimers-example.c
-	- gptimers example

Documentation/blackfin/Makefile

-ifneq ($(CONFIG_BLACKFIN),)
-ifneq ($(CONFIG_BFIN_GPTIMERS),)
-obj-m := gptimers-example.o
-endif
-endif

Documentation/device-mapper/dm-raid.txt

@@ -309,3 +309,4 @@ Version History
 	with a reshape in progress.
 1.9.0   Add support for RAID level takeover/reshape/region size
 	and set size reduction.
+1.9.1   Fix activation of existing RAID 4/10 mapped devices

Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt

+Binding for ASCII LCD displays on Imagination Technologies boards
+
+Required properties:
+- compatible : should be one of:
+    "img,boston-lcd"
+    "mti,malta-lcd"
+    "mti,sead3-lcd"
+
+Required properties for "img,boston-lcd":
+- reg : memory region locating the device registers
+
+Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
+- regmap: phandle of the system controller containing the LCD registers
+- offset: offset in bytes to the LCD registers within the system controller
+
+The layout of the registers & properties of the display are determined
+from the compatible string, making this binding somewhat trivial.

Documentation/devicetree/bindings/clock/uniphier-clock.txt

@@ -24,7 +24,7 @@ Example:
 		reg = <0x61840000 0x4000>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-clock";
+			compatible = "socionext,uniphier-ld11-clock";
 			#clock-cells = <1>;
 		};
 
@@ -43,8 +43,8 @@ Provided clocks:
 21: USB3 ch1 PHY1
 
 
-Media I/O (MIO) clock
----------------------
+Media I/O (MIO) clock, SD clock
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
@@ -52,10 +52,10 @@ Required properties:
     "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
+    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
 - #clock-cells: should be 1.
 
 Example:
@@ -66,7 +66,7 @@ Example:
 		reg = <0x59810000 0x800>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-mio-clock";
+			compatible = "socionext,uniphier-ld11-mio-clock";
 			#clock-cells = <1>;
 		};
 
@@ -112,7 +112,7 @@ Example:
 		reg = <0x59820000 0x200>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-peri-clock";
+			compatible = "socionext,uniphier-ld11-peri-clock";
 			#clock-cells = <1>;
 		};
 

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -32,6 +32,14 @@ wants to support one of the below features, it should adapt the bindings below.
 - clock-frequency
 	frequency of bus clock in Hz.
 
+- i2c-bus
+	For I2C adapters that have child nodes that are a mixture of both I2C
+	devices and non-I2C devices, the 'i2c-bus' subnode can be used for
+	populating I2C devices. If the 'i2c-bus' subnode is present, only
+	subnodes of this will be considered as I2C slaves. The properties,
+	'#address-cells' and '#size-cells' must be defined under this subnode
+	if present.
+
 - i2c-scl-falling-time-ns
 	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
 	specification.

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -51,7 +51,6 @@ fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
-isil,isl12057		Intersil ISL12057 I2C RTC Chip
 isil,isl29028		Intersil ISL29028 Ambient Light and Proximity Sensor
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs

Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt

@@ -14,6 +14,7 @@ length of memory mapped region.
 representing a ethernet device.
 - dsaf-handle: phandle, specifies a reference to a node
 representing a dsaf device.
+- node_guid: a number that uniquely identifies a device or component
 - #address-cells: must be 2
 - #size-cells: must be 2
 Optional properties:
@@ -32,6 +33,7 @@ Example:
 			dma-coherent;
 			eth-handle = <&eth2 &eth3 &eth4 &eth5 &eth6 &eth7>;
 			dsaf-handle = <&soc0_dsa>;
+			node-guid = [00 9A CD 00 00 01 02 03];
 			#address-cells = <2>;
 			#size-cells = <2>;
 			interrupt-parent = <&mbigen_dsa>;

Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt

+* MELFAS MIP4 Touchscreen
+
+Required properties:
+- compatible: must be "melfas,mip4_ts"
+- reg: I2C slave address of the chip (0x48 or 0x34)
+- interrupt-parent: interrupt controller to which the chip is connected
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip
+
+Example:
+	i2c@00000000 {
+		touchscreen: melfas_mip4@48 {
+			compatible = "melfas,mip4_ts";
+			reg = <0x48>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+			ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+		};
+	};

Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt

+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-bt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+	};

Documentation/devicetree/bindings/mips/brcm/soc.txt

@@ -2,9 +2,9 @@
 
 Required properties:
 
-- compatible: "brcm,bcm3384", "brcm,bcm33843"
+- compatible: "brcm,bcm3368", "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6362", "brcm,bcm6368",
               "brcm,bcm63168", "brcm,bcm63268",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"

Documentation/devicetree/bindings/net/marvell-orion-net.txt

@@ -49,6 +49,7 @@ Optional port properties:
 and
 
  - phy-handle: See ethernet.txt file in the same directory.
+ - phy-mode: See ethernet.txt file in the same directory.
 
 or
 

Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt

@@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
 
 GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
 I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
+RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
+TIMER7 TIMER8 VGABIOSROM
+
 
 Examples:
 

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -6,25 +6,25 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
+		compatible = "socionext,uniphier-ld11-sysctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x61840000 0x4000>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-reset";
+			compatible = "socionext,uniphier-ld11-reset";
 			#reset-cells = <1>;
 		};
 
@@ -32,30 +32,30 @@ Example:
 	};
 
 
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	mioctrl@59810000 {
-		compatible = "socionext,uniphier-ld20-mioctrl",
+		compatible = "socionext,uniphier-ld11-mioctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59810000 0x800>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-mio-reset";
+			compatible = "socionext,uniphier-ld11-mio-reset";
 			#reset-cells = <1>;
 		};
 
@@ -68,24 +68,24 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	perictrl@59820000 {
-		compatible = "socionext,uniphier-ld20-perictrl",
+		compatible = "socionext,uniphier-ld11-perictrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59820000 0x200>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-peri-reset";
+			compatible = "socionext,uniphier-ld11-peri-reset";
 			#reset-cells = <1>;
 		};
 

Documentation/devicetree/bindings/rtc/dallas,ds1390.txt

@@ -11,7 +11,7 @@ Optional properties:
 - trickle-diode-disable : Do not use internal trickle charger diode
 	Should be given if internal trickle charger diode should be disabled
 Example:
-	ds1390: rtc@68 {
+	ds1390: rtc@0 {
 		compatible = "dallas,ds1390";
 		trickle-resistor-ohms = <250>;
 		reg = <0>;

Documentation/devicetree/bindings/rtc/epson,rx8900.txt

+Real Time Clock driver for:
+  - Epson RX8900
+  - Micro Crystal rv8803
+
+Required properties:
+- compatible: should be: "microcrystal,rv8803" or "epson,rx8900"
+- reg : the I2C address of the device for I2C
+
+Optional properties:
+- epson,vdet-disable : boolean, if present will disable voltage detector.
+  Should be set if no backup battery is used.
+- trickle-diode-disable : boolean, if present will disable internal trickle
+  charger diode
+
+Example:
+
+	rtc: rtc@32 {
+		compatible = "epson,rx8900"
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};

Documentation/devicetree/bindings/rtc/rtc-omap.txt

@@ -18,6 +18,18 @@ Optional properties:
   through pmic_power_en
 - clocks: Any internal or external clocks feeding in to rtc
 - clock-names: Corresponding names of the clocks
+- pinctrl-0: a phandle pointing to the pin settings for the device
+- pinctrl-names: should be "default"
+
+Optional subnodes:
+- generic pinctrl node
+
+Required pinctrl subnodes properties:
+- pins - Names of ext_wakeup pins to configure
+
+Optional pinctrl subnodes properties:
+- input-enable - Enables ext_wakeup
+- ti,active-high - Set input active high (by default active low)
 
 Example:
 
@@ -30,4 +42,13 @@ rtc@1c23000 {
 	system-power-controller;
 	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
 	clock-names = "ext-clk", "int-clk";
+
+	pinctrl-0 = <&ext_wakeup>;
+	pinctrl-names = "default";
+
+	ext_wakeup: ext-wakeup {
+		pins = "ext_wakeup0";
+		input-enable;
+		ti,active-high;
+	};
 };

Documentation/devicetree/bindings/serial/cdns,uart.txt

 Binding for Cadence UART Controller
 
 Required properties:
-- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- compatible :
+  Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
+  Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
 - clocks: Must contain phandles to the UART clocks

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -9,6 +9,14 @@ Required properties:
     - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
     - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
     - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+    - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
+    - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
+    - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
+    - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+    - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
+    - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
+    - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
+    - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.

Documentation/devicetree/bindings/timer/jcore,pit.txt

+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+  there should be one region per cpu, indexed by the sequential,
+  zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+  core is integrated with the aic and allows the timer interrupt
+  assignment to be programmed by software, but this property is
+  required in order to reserve an interrupt number that doesn't
+  conflict with other devices.
+
+
+Example:
+
+timer@200 {
+	compatible = "jcore,pit";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupts = < 0x48 >;
+};

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-use-dma: enable dma usage in gadget driver.
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-
-Deprecated properties:
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
-  in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 
 Example:
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -163,9 +163,11 @@ maxim	Maxim Integrated Products
 meas	Measurement Specialties
 mediatek	MediaTek Inc.
 melexis	Melexis N.V.
+melfas	MELFAS Inc.
 merrii	Merrii Technology Co., Ltd.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
+microcrystal	Micro Crystal AG
 micron	Micron Technology Inc.
 minix	MINIX Technology Ltd.
 mitsubishi	Mitsubishi Electric Corporation

Documentation/features/perf/kprobes-event/arch-support.txt

@@ -22,7 +22,7 @@
     |        m68k: | TODO |
     |       metag: | TODO |
     |  microblaze: | TODO |
-    |        mips: | TODO |
+    |        mips: |  ok  |
     |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |

Documentation/filesystems/00-INDEX

@@ -2,8 +2,6 @@
 	- this file (info on some of the filesystems supported by linux).
 Locking
 	- info on locking rules as they pertain to Linux VFS.
-Makefile
-	- Makefile for building the filsystems-part of DocBook.
 9p.txt
 	- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
 adfs.txt

Documentation/filesystems/Makefile

-# List of programs to build
-hostprogs-y := dnotify_test
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)

Documentation/filesystems/proc.txt

@@ -395,32 +395,6 @@ is not associated with a file:
 
  or if empty, the mapping is anonymous.
 
-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
-of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. Hence, for the example above, the
-task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
-
-08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
-08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
-0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
-a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
-a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack]
-a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
-a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
-a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
-a800b000-a800e000 rw-p 00000000 00:00 0
-a800e000-a8022000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
-a8022000-a8023000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
-a8023000-a8024000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
-a8024000-a8027000 rw-p 00000000 00:00 0
-a8027000-a8043000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
-a8043000-a8044000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
-a8044000-a8045000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
-aff35000-aff4a000 rw-p 00000000 00:00 0
-ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
-
 The /proc/PID/smaps is an extension based on maps, showing the memory
 consumption for each of the process's mappings. For each of mappings there
 is a series of lines such as the following:

Documentation/gpio/board.txt

@@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a
 description of the deprecated integer-based GPIO interface please refer to
 gpio-legacy.txt (actually, there is no real mapping possible with the old
 interface; you just fetch an integer from somewhere and request the
-corresponding GPIO.
+corresponding GPIO).
 
 All platforms can enable the GPIO library, but if the platform strictly
 requires GPIO functionality to be present, it needs to select GPIOLIB from its
@@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
 Since the "led" GPIOs are mapped as active-high, this example will switch their
 signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
-as active-low, its actual signal will be 0 after this code. Contrary to the legacy
-integer GPIO interface, the active-low property is handled during mapping and is
-thus transparent to GPIO consumers.
+as active-low, its actual signal will be 0 after this code. Contrary to the
+legacy integer GPIO interface, the active-low property is handled during
+mapping and is thus transparent to GPIO consumers.
+
+A set of functions such as gpiod_set_value() is available to work with
+the new descriptor-oriented interface.

Documentation/ia64/Makefile

-# List of programs to build
-hostprogs-y := aliasing-test
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)

Documentation/index.rst

@@ -17,6 +17,7 @@ Contents:
    driver-api/index
    media/index
    gpu/index
+   80211/index
 
 Indices and tables
 ==================

Documentation/input/alps.txt

@@ -319,3 +319,60 @@ For touchpad packet, the format is:
                otherwise byte 0 bit 4 must be set and byte 0/4/5 are
                in NEW fmt
  F:         Number of fingers - 3, 0 means 3 fingers, 1 means 4 ...
+
+
+ALPS Absolute Mode - Protocol Version 8
+---------------------------------------
+
+Spoken by SS4 (73 03 14) and SS5 (73 03 28) hardware.
+
+The packet type is given by the APD field, bits 4-5 of byte 3.
+
+Touchpad packet (APD = 0x2):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1    0    0   X7
+ byte 1:    0   X6   X5   X4   X3   X2   X1   X0
+ byte 2:    0   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 3:    0  T&P    1    0    1    0    0   Y7
+ byte 4:    0   Z6   Z5   Z4   Z3   Z2   Z1   Z0
+ byte 5:    0    0    0    0    0    0    0    0
+
+SWM, SWR, SWL: Middle, Right, and Left button states
+
+Touchpad 1 Finger packet (APD = 0x0):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1   X2   X1   X0
+ byte 1:   X9   X8   X7    1   X6   X5   X4   X3
+ byte 2:    0  X11  X10  LFB   Y3   Y2   Y1   Y0
+ byte 3:   Y5   Y4    0    0    1 TAPF2 TAPF1 TAPF0
+ byte 4:  Zv7  Y11  Y10    1   Y9   Y8   Y7   Y6
+ byte 5:  Zv6  Zv5  Zv4    0  Zv3  Zv2  Zv1  Zv0
+
+TAPF: ???
+LFB:  ???
+
+Touchpad 2 Finger packet (APD = 0x1):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1  AX6  AX5  AX4
+ byte 1: AX11 AX10  AX9  AX8  AX7  AZ1  AY4  AZ0
+ byte 2: AY11 AY10  AY9  CONT AY8  AY7  AY6  AY5
+ byte 3:    0    0    0    1    1  BX6  BX5  BX4
+ byte 4: BX11 BX10  BX9  BX8  BX7  BZ1  BY4  BZ0
+ byte 5: BY11 BY10  BY9    0  BY8  BY7  BY5  BY5
+
+CONT: A 3-or-4 Finger packet is to follow
+
+Touchpad 3-or-4 Finger packet (APD = 0x3):
+
+           b7   b6   b5   b4   b3   b2   b1   b0
+ byte 0:  SWM  SWR  SWL    1    1  AX6  AX5  AX4
+ byte 1: AX11 AX10  AX9  AX8  AX7  AZ1  AY4  AZ0
+ byte 2: AY11 AY10  AY9  OVF  AY8  AY7  AY6  AY5
+ byte 3:    0    0    1    1    1  BX6  BX5  BX4
+ byte 4: BX11 BX10  BX9  BX8  BX7  BZ1  BY4  BZ0
+ byte 5: BY11 BY10  BY9    0  BY8  BY7  BY5  BY5
+
+OVF: 5th finger detected

Documentation/kbuild/makefiles.txt

@@ -41,6 +41,7 @@ This document describes the Linux kernel Makefiles.
 	   --- 6.8 Custom kbuild commands
 	   --- 6.9 Preprocessing linker scripts
 	   --- 6.10 Generic header files
+	   --- 6.11 Post-link pass
 
 	=== 7 Kbuild syntax for exported headers
 		--- 7.1 header-y
@@ -1237,6 +1238,21 @@ When kbuild executes, the following steps are followed (roughly):
 	to list the file in the Kbuild file.
 	See "7.4 generic-y" for further info on syntax etc.
 
+--- 6.11 Post-link pass
+
+	If the file arch/xxx/Makefile.postlink exists, this makefile
+	will be invoked for post-link objects (vmlinux and modules.ko)
+	for architectures to run post-link passes on. Must also handle
+	the clean target.
+
+	This pass runs after kallsyms generation. If the architecture
+	needs to modify symbol locations, rather than manipulate the
+	kallsyms, it may be easier to add another postlink target for
+	.tmp_vmlinux? targets to be called from link-vmlinux.sh.
+
+	For example, powerpc uses this to check relocation sanity of
+	the linked vmlinux file.
+
 === 7 Kbuild syntax for exported headers
 
 The kernel includes a set of headers that is exported to userspace.

Documentation/kernel-parameters.txt

@@ -1511,7 +1511,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
-	i8042.reset	[HW] Reset the controller during init and cleanup
+	i8042.reset	[HW] Reset the controller during init, cleanup and
+			     suspend-to-ram transitions, only during s2r
+			     transitions, or never reset
+			Format: { 1 | Y | y | 0 | N | n }
+			1, Y, y: always reset controller
+			0, N, n: don't ever reset controller
+			Default: only on s2r transitions on x86; most other
+			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset  [HW] Reset device connected to KBD port
 

Documentation/kselftest.txt

 Linux Kernel Selftests
 
 The kernel contains a set of "self tests" under the tools/testing/selftests/
-directory. These are intended to be small unit tests to exercise individual
-code paths in the kernel.
+directory. These are intended to be small tests to exercise individual code
+paths in the kernel. Tests are intended to be run after building, installing
+and booting a kernel.
 
 On some systems, hot-plug tests could hang forever waiting for cpu and
 memory to be ready to be offlined. A special hot-plug target is created

Documentation/laptops/00-INDEX

 00-INDEX
 	- This file
-Makefile
-	- Makefile for building dslm example program.
 asus-laptop.txt
 	- information on the Asus Laptop Extras driver.
 disk-shock-protection.txt
 	- information on hard disk shock protection.
-dslm.c
-	- Simple Disk Sleep Monitor program
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt

Documentation/laptops/Makefile

-# List of programs to build
-hostprogs-y := dslm
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)

Documentation/laptops/laptop-mode.txt

@@ -779,4 +779,4 @@ Monitoring tool
 ---------------
 
 Bartek Kania submitted this, it can be used to measure how much time your disk
-spends spun up/down.  See Documentation/laptops/dslm.c
+spends spun up/down.  See tools/laptop/dslm/dslm.c

Documentation/mic/Makefile

-subdir-y := mpssd

Documentation/mic/mpssd/Makefile

-ifndef CROSS_COMPILE
-# List of programs to build
-hostprogs-$(CONFIG_X86_64) := mpssd
-
-mpssd-objs := mpssd.o sysfs.o
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS += -I$(objtree)/usr/include -I$(srctree)/tools/include
-
-ifdef DEBUG
-HOSTCFLAGS += -DDEBUG=$(DEBUG)
-endif
-
-HOSTLOADLIBES_mpssd := -lpthread
-
-install:
-	install mpssd /usr/sbin/mpssd
-	install micctrl /usr/sbin/micctrl
-endif

Documentation/misc-devices/Makefile

-subdir-y := mei

Documentation/misc-devices/mei/Makefile

-# List of programs to build
-hostprogs-y := mei-amt-version
-HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)

Documentation/networking/00-INDEX

@@ -10,8 +10,6 @@ LICENSE.qlge
 	- GPLv2 for QLogic Linux qlge NIC Driver
 LICENSE.qlcnic
 	- GPLv2 for QLogic Linux qlcnic NIC Driver
-Makefile
-	- Makefile for docsrc.
 PLIP.txt
 	- PLIP: The Parallel Line Internet Protocol device driver
 README.ipw2100

Documentation/networking/Makefile

-subdir-y := timestamping

Documentation/networking/netdev-FAQ.txt

@@ -29,8 +29,8 @@ A: There are always two trees (git repositories) in play.  Both are driven
    Linus, and net-next is where the new code goes for the future release.
    You can find the trees here:
 
-	http://git.kernel.org/?p=linux/kernel/git/davem/net.git
-	http://git.kernel.org/?p=linux/kernel/git/davem/net-next.git
+        https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+        https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
 
 Q: How often do changes from these trees make it to the mainline Linus tree?
 
@@ -76,7 +76,7 @@ Q: So where are we now in this cycle?
 
 A: Load the mainline (Linus) page here:
 
-	http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
 
    and note the top of the "tags" section.  If it is rc1, it is early
    in the dev cycle.  If it was tagged rc7 a week ago, then a release
@@ -123,7 +123,7 @@ A: Normally Greg Kroah-Hartman collects stable commits himself, but
 
    It contains the patches which Dave has selected, but not yet handed
    off to Greg.  If Greg already has the patch, then it will be here:
-	http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
 
    A quick way to find whether the patch is in this stable-queue is
    to simply clone the repo, and then git grep the mainline commit ID, e.g.

Documentation/networking/nf_conntrack-sysctl.txt

@@ -33,24 +33,6 @@ nf_conntrack_events - BOOLEAN
 	If this option is enabled, the connection tracking code will
 	provide userspace with connection tracking events via ctnetlink.
 
-nf_conntrack_events_retry_timeout - INTEGER (seconds)
-	default 15
-
-	This option is only relevant when "reliable connection tracking
-	events" are used.  Normally, ctnetlink is "lossy", that is,
-	events are normally dropped when userspace listeners can't keep up.
-
-	Userspace can request "reliable event mode".  When this mode is
-	active, the conntrack will only be destroyed after the event was
-	delivered.  If event delivery fails, the kernel periodically
-	re-tries to send the event to userspace.
-
-	This is the maximum interval the kernel should use when re-trying
-	to deliver the destroy event.
-
-	A higher number means there will be fewer delivery retries and it
-	will take longer for a backlog to be processed.
-
 nf_conntrack_expect_max - INTEGER
 	Maximum size of expectation table.  Default value is
 	nf_conntrack_buckets / 256. Minimum is 1.

Documentation/networking/timestamping/Makefile

-# To compile, from the source root
-#
-#    make headers_install
-#    make M=documentation
-
-# List of programs to build
-hostprogs-y := hwtstamp_config timestamping txtimestamp
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include
-HOSTCFLAGS_txtimestamp.o += -I$(objtree)/usr/include
-HOSTCFLAGS_hwtstamp_config.o += -I$(objtree)/usr/include

Documentation/pcmcia/Makefile

-# List of programs to build
-hostprogs-y := crc32hash
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_crc32hash.o += -I$(objtree)/usr/include

Documentation/pcmcia/devicetable.txt

@@ -27,7 +27,7 @@ pcmcia:m0149cC1ABf06pfn00fn00pa725B842DpbF1EFEE84pc0877B627pd00000000
 The hex value after "pa" is the hash of product ID string 1, after "pb" for
 string 2 and so on.
 
-Alternatively, you can use crc32hash (see Documentation/pcmcia/crc32hash.c)
+Alternatively, you can use crc32hash (see tools/pcmcia/crc32hash.c)
 to determine the crc32 hash.  Simply pass the string you want to evaluate
 as argument to this program, e.g.:
-$ ./crc32hash "Dual Speed"
+$ tools/pcmcia/crc32hash "Dual Speed"

Documentation/prctl/Makefile

-ifndef CROSS_COMPILE
-# List of programs to build
-hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_disable-tsc-ctxt-sw-stress-test.o += -I$(objtree)/usr/include
-HOSTCFLAGS_disable-tsc-on-off-stress-test.o += -I$(objtree)/usr/include
-HOSTCFLAGS_disable-tsc-test.o += -I$(objtree)/usr/include
-endif

Documentation/ptp/Makefile

-# List of programs to build
-hostprogs-y := testptp
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_testptp.o += -I$(objtree)/usr/include
-HOSTLOADLIBES_testptp := -lrt

Documentation/scsi/g_NCR5380.txt

@@ -21,16 +21,6 @@ NCR53c400 card, the Trantor T130B in its default configuration:
 The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
 supported by the driver.
 
-If the default configuration does not work for you, you can use the kernel
-command lines (eg using the lilo append command):
-	ncr5380=addr,irq
-	ncr53c400=addr,irq
-	ncr53c400a=addr,irq
-	dtc3181e=addr,irq
-
-The driver does not probe for any addresses or ports other than those in
-the OVERRIDE or given to the kernel as above.
-
 This driver provides some information on what it has detected in
 /proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
 time. More info to come in the future.
@@ -38,6 +28,16 @@ time. More info to come in the future.
 This driver works as a module.
 When included as a module, parameters can be passed on the insmod/modprobe
 command line:
+  irq=xx[,...]	the interrupt(s)
+  base=xx[,...]	the port or base address(es) (for port or memory mapped, resp.)
+  card=xx[,...]	card type(s):
+		0 = NCR5380,
+		1 = NCR53C400,
+		2 = NCR53C400A,
+		3 = Domex Technology Corp 3181E (DTC3181E)
+		4 = Hewlett Packard C2502
+
+These old-style parameters can support only one card:
   ncr_irq=xx   the interrupt
   ncr_addr=xx  the port or base address (for port or memory
                mapped, resp.)
@@ -46,11 +46,19 @@ command line:
   ncr_53c400a=1 to set up for a NCR53C400A board
   dtc_3181e=1  to set up for a Domex Technology Corp 3181E board
   hp_c2502=1   to set up for a Hewlett Packard C2502 board
+
 e.g.
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0
   for a port mapped NCR5380 board or
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
-  for a memory mapped NCR53C400 board with interrupts disabled.
+
+OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+  for a memory mapped NCR53C400 board with interrupts disabled or
+
+NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+  for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+             and HP C2502 at 0x300 with IRQ 7
 
 (255 should be specified for no or DMA interrupt, 254 to autoprobe for an 
      IRQ line if overridden on the command line.)

Documentation/spi/00-INDEX

 00-INDEX
 	- this file.
-Makefile
-	- Makefile for the example sourcefiles.
 butterfly
 	- AVR Butterfly SPI driver overview and pin configuration.
 ep93xx_spi

Documentation/timers/00-INDEX

@@ -4,12 +4,8 @@ highres.txt
 	- High resolution timers and dynamic ticks design notes
 hpet.txt
 	- High Precision Event Timer Driver for Linux
-hpet_example.c
-	- sample hpet timer test program
 hrtimers.txt
 	- subsystem for high-resolution kernel timers
-Makefile
-	- Build and link hpet_example
 NO_HZ.txt
 	- Summary of the different methods for the scheduler clock-interrupts management.
 timekeeping.txt

Documentation/timers/Makefile

-# List of programs to build
-hostprogs-$(CONFIG_X86) := hpet_example
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)

Documentation/timers/hpet.txt

@@ -25,4 +25,4 @@ arch/x86/kernel/hpet.c.
 
 The driver provides a userspace API which resembles the API found in the
 RTC driver framework.  An example user space program is provided in
-file:Documentation/timers/hpet_example.c
+file:samples/timers/hpet_example.c

Documentation/vDSO/Makefile

-ifndef CROSS_COMPILE
-# vdso_test won't build for glibc < 2.16, so disable it
-# hostprogs-y := vdso_test
-hostprogs-$(CONFIG_X86) := vdso_standalone_test_x86
-vdso_standalone_test_x86-objs := vdso_standalone_test_x86.o parse_vdso.o
-vdso_test-objs := parse_vdso.o vdso_test.o
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99
-HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector
-HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib
-ifeq ($(CONFIG_X86_32),y)
-HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s
-endif
-endif

Documentation/watchdog/Makefile

-subdir-y := src

Documentation/watchdog/src/Makefile

-# List of programs to build
-hostprogs-y := watchdog-simple watchdog-test
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)

Documentation/watchdog/watchdog-api.txt

@@ -37,7 +37,7 @@ activates as soon as /dev/watchdog is opened and will reboot unless
 the watchdog is pinged within a certain time, this time is called the
 timeout or margin.  The simplest way to ping the watchdog is to write
 some data to the device.  So a very simple watchdog daemon would look
-like this source file:  see Documentation/watchdog/src/watchdog-simple.c
+like this source file:  see samples/watchdog/watchdog-simple.c
 
 A more advanced driver could for example check that a HTTP server is
 still responding before doing the write call to ping the watchdog.

Documentation/watchdog/wdt.txt

@@ -47,4 +47,4 @@ The external event interfaces on the WDT boards are not currently supported.
 Minor numbers are however allocated for it.
 
 
-Example Watchdog Driver:  see Documentation/watchdog/src/watchdog-simple.c
+Example Watchdog Driver:  see samples/watchdog/watchdog-simple.c

MAINTAINERS

@@ -316,6 +316,14 @@ W:	https://01.org/linux-acpi
 S:	Supported
 F:	drivers/acpi/fan.c
 
+ACPI FOR ARM64 (ACPI/arm64)
+M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+M:	Hanjun Guo <hanjun.guo@linaro.org>
+M:	Sudeep Holla <sudeep.holla@arm.com>
+L:	linux-acpi@vger.kernel.org
+S:	Maintained
+F:	drivers/acpi/arm64
+
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -1434,6 +1442,7 @@ F:	drivers/cpufreq/mvebu-cpufreq.c
 F:	arch/arm/configs/mvebu_*_defconfig
 
 ARM/Marvell Berlin SoC support
+M:	Jisheng Zhang <jszhang@marvell.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -2545,15 +2554,18 @@ S:	Supported
 F:	drivers/net/ethernet/broadcom/genet/
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M:	Sony Chacko <sony.chacko@qlogic.com>
-M:	Dept-HSGLinuxNICDev@qlogic.com
+M:	Rasesh Mody <rasesh.mody@cavium.com>
+M:	Harish Patil <harish.patil@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2.*
 F:	drivers/net/ethernet/broadcom/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Ariel Elior <ariel.elior@qlogic.com>
+M:	Yuval Mintz <Yuval.Mintz@cavium.com>
+M:	Ariel Elior <ariel.elior@cavium.com>
+M:	everest-linux-l2@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
@@ -2760,7 +2772,9 @@ S:	Supported
 F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rasesh.mody@qlogic.com>
+M:	Rasesh Mody <rasesh.mody@cavium.com>
+M:	Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
@@ -4614,8 +4628,9 @@ F:	sound/usb/misc/ua101.c
 
 EXTENSIBLE FIRMWARE INTERFACE (EFI)
 M:	Matt Fleming <matt@codeblueprint.co.uk>
+M:	Ard Biesheuvel <ard.biesheuvel@linaro.org>
 L:	linux-efi@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi.git
 S:	Maintained
 F:	Documentation/efi-stub.txt
 F:	arch/ia64/kernel/efi.c
@@ -5280,6 +5295,12 @@ M:	Joe Perches <joe@perches.com>
 S:	Maintained
 F:	scripts/get_maintainer.pl
 
+GENWQE (IBM Generic Workqueue Card)
+M:	Frank Haverkamp <haver@linux.vnet.ibm.com>
+M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+S:	Supported
+F:	drivers/misc/genwqe/
+
 GFS2 FILE SYSTEM
 M:	Steven Whitehouse <swhiteho@redhat.com>
 M:	Bob Peterson <rpeterso@redhat.com>
@@ -6125,6 +6146,12 @@ M:	Stanislaw Gruszka <stf_xl@wp.pl>
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
+IMGTEC ASCII LCD DRIVER
+M:	Paul Burton <paul.burton@imgtec.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
+F:	drivers/auxdisplay/img-ascii-lcd.c
+
 INA209 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
@@ -6436,6 +6463,7 @@ F:	include/linux/mei_cl_bus.h
 F:	drivers/misc/mei/*
 F:	drivers/watchdog/mei_wdt.c
 F:	Documentation/misc-devices/mei/*
+F:	samples/mei/*
 
 INTEL MIC DRIVERS (mic)
 M:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -6622,10 +6650,10 @@ S:	Maintained
 F:	drivers/firmware/iscsi_ibft*
 
 ISCSI
-M:	Mike Christie <michaelc@cs.wisc.edu>
+M:	Lee Duncan <lduncan@suse.com>
+M:	Chris Leech <cleech@redhat.com>
 L:	open-iscsi@googlegroups.com
-W:	www.open-iscsi.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
+W:	www.open-iscsi.com
 S:	Maintained
 F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
@@ -7203,17 +7231,11 @@ F:	drivers/lightnvm/
 F:	include/linux/lightnvm.h
 F:	include/uapi/linux/lightnvm.h
 
-LINUX FOR IBM pSERIES (RS/6000)
-M:	Paul Mackerras <paulus@au.ibm.com>
-W:	http://www.ibm.com/linux/ltc/projects/ppc
-S:	Supported
-F:	arch/powerpc/boot/rs6000.h
-
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Michael Ellerman <mpe@ellerman.id.au>
-W:	http://www.penguinppc.org/
+W:	https://github.com/linuxppc/linux/wiki
 L:	linuxppc-dev@lists.ozlabs.org
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git
@@ -7228,6 +7250,7 @@ F:	drivers/net/ethernet/ibm/ibmvnic.*
 F:	drivers/pci/hotplug/pnv_php.c
 F:	drivers/pci/hotplug/rpa*
 F:	drivers/scsi/ibmvscsi/
+F:	tools/testing/selftests/powerpc
 N:	opal
 N:	/pmac
 N:	powermac
@@ -7284,9 +7307,8 @@ F:	arch/powerpc/platforms/83xx/
 F:	arch/powerpc/platforms/85xx/
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
-M:	Olof Johansson <olof@lixom.net>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Maintained
+S:	Orphan
 F:	arch/powerpc/platforms/pasemi/
 F:	drivers/*/*pasemi*
 F:	drivers/*/*/*pasemi*
@@ -7829,6 +7851,13 @@ F:	Documentation/scsi/megaraid.txt
 F:	drivers/scsi/megaraid.*
 F:	drivers/scsi/megaraid/
 
+MELFAS MIP4 TOUCHSCREEN DRIVER
+M:	Sangwon Jee <jeesw@melfas.com>
+W:	http://www.melfas.com
+S:	Supported
+F:	drivers/input/touchscreen/melfas_mip4.c
+F:	Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt
+
 MELLANOX ETHERNET DRIVER (mlx4_en)
 M:	Tariq Toukan <tariqt@mellanox.com>
 L:	netdev@vger.kernel.org
@@ -8085,6 +8114,7 @@ S:	Maintained
 F:	drivers/media/dvb-frontends/mn88473*
 
 MODULE SUPPORT
+M:	Jessica Yu <jeyu@redhat.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
 S:	Maintained
 F:	include/linux/module.h
@@ -8198,7 +8228,7 @@ F:	include/linux/mfd/
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
-T:	git git://git.linaro.org/people/ulf.hansson/mmc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/mmc/
 F:	drivers/mmc/
@@ -8493,11 +8523,10 @@ F:	Documentation/devicetree/bindings/net/wireless/
 F:	drivers/net/wireless/
 
 NETXEN (1/10) GbE SUPPORT
-M:	Manish Chopra <manish.chopra@qlogic.com>
-M:	Sony Chacko <sony.chacko@qlogic.com>
-M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Rahul Verma <rahul.verma@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
-W:	http://www.qlogic.com
 S:	Supported
 F:	drivers/net/ethernet/qlogic/netxen/
 
@@ -9020,15 +9049,13 @@ S:	Maintained
 F:	drivers/net/wireless/intersil/p54/
 
 PA SEMI ETHERNET DRIVER
-M:	Olof Johansson <olof@lixom.net>
 L:	netdev@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/ethernet/pasemi/*
 
 PA SEMI SMBUS DRIVER
-M:	Olof Johansson <olof@lixom.net>
 L:	linux-i2c@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/i2c/busses/i2c-pasemi.c
 
 PADATA PARALLEL EXECUTION MECHANISM
@@ -9286,7 +9313,7 @@ S:	Maintained
 F:	drivers/pci/host/*designware*
 
 PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
-M:	Joao Pinto <jpinto@synopsys.com>
+M:	Jose Abreu <Jose.Abreu@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -9377,6 +9404,7 @@ W:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia.git
 S:	Maintained
 F:	Documentation/pcmcia/
+F:	tools/pcmcia/
 F:	drivers/pcmcia/
 F:	include/pcmcia/
 
@@ -9874,33 +9902,32 @@ F:	Documentation/scsi/LICENSE.qla4xxx
 F:	drivers/scsi/qla4xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
-M:	Ron Mercer <ron.mercer@qlogic.com>
-M:	linux-driver@qlogic.com
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Dept-GELinuxNICDev@qlogic.com
+M:	Harish Patil <harish.patil@cavium.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Harish Patil <harish.patil@qlogic.com>
-M:	Sudarsana Kalluru <sudarsana.kalluru@qlogic.com>
-M:	Dept-GELinuxNICDev@qlogic.com
-M:	linux-driver@qlogic.com
+M:	Harish Patil <harish.patil@cavium.com>
+M:	Manish Chopra <manish.chopra@cavium.com>
+M:	Dept-GELinuxNICDev@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlge/
 
 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Yuval Mintz <Yuval.Mintz@qlogic.com>
-M:	Ariel Elior <Ariel.Elior@qlogic.com>
-M:	everest-linux-l2@qlogic.com
+M:	Yuval Mintz <Yuval.Mintz@cavium.com>
+M:	Ariel Elior <Ariel.Elior@cavium.com>
+M:	everest-linux-l2@cavium.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/

Makefile

 VERSION = 4
-PATCHLEVEL = 8
+PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc3
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -623,6 +623,11 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
 KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,)
 KBUILD_CFLAGS	+= $(call cc-disable-warning,frame-address,)
 
+ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+KBUILD_CFLAGS	+= $(call cc-option,-ffunction-sections,)
+KBUILD_CFLAGS	+= $(call cc-option,-fdata-sections,)
+endif
+
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 KBUILD_CFLAGS	+= -Os
 else
@@ -803,6 +808,10 @@ LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 
+ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+LDFLAGS_vmlinux	+= $(call ld-option, --gc-sections,)
+endif
+
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
@@ -927,9 +936,6 @@ vmlinux_prereq: $(vmlinux-deps) FORCE
 ifdef CONFIG_HEADERS_CHECK
 	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
 endif
-ifdef CONFIG_BUILD_DOCSRC
-	$(Q)$(MAKE) $(build)=Documentation
-endif
 ifdef CONFIG_GDB_SCRIPTS
 	$(Q)ln -fsn `cd $(srctree) && /bin/pwd`/scripts/gdb/vmlinux-gdb.py
 endif
@@ -942,9 +948,12 @@ endif
 include/generated/autoksyms.h: FORCE
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh true
 
-# Final link of vmlinux
-      cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
-quiet_cmd_link-vmlinux = LINK    $@
+ARCH_POSTLINK := $(wildcard $(srctree)/arch/$(SRCARCH)/Makefile.postlink)
+
+# Final link of vmlinux with optional arch pass after final link
+    cmd_link-vmlinux =                                                 \
+	$(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) ;       \
+	$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) $@, true)
 
 vmlinux: scripts/link-vmlinux.sh vmlinux_prereq $(vmlinux-deps) FORCE
 	+$(call if_changed,link-vmlinux)
@@ -1271,6 +1280,7 @@ $(clean-dirs):
 
 vmlinuxclean:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
+	$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
 
 clean: archclean vmlinuxclean
 

arch/Kconfig

@@ -383,6 +383,24 @@ config GCC_PLUGIN_SANCOV
 	  gcc-4.5 on). It is based on the commit "Add fuzzing coverage support"
 	  by Dmitry Vyukov <dvyukov@google.com>.
 
+config GCC_PLUGIN_LATENT_ENTROPY
+	bool "Generate some entropy during boot and runtime"
+	depends on GCC_PLUGINS
+	help
+	  By saying Y here the kernel will instrument some kernel code to
+	  extract some entropy from both original and artificially created
+	  program state.  This will help especially embedded systems where
+	  there is little 'natural' source of entropy normally.  The cost
+	  is some slowdown of the boot process (about 0.5%) and fork and
+	  irq processing.
+
+	  Note that entropy extracted this way is not cryptographically
+	  secure!
+
+	  This plugin was ported from grsecurity/PaX. More information at:
+	   * https://grsecurity.net/
+	   * https://pax.grsecurity.net/
+
 config HAVE_CC_STACKPROTECTOR
 	bool
 	help
@@ -450,6 +468,27 @@ config CC_STACKPROTECTOR_STRONG
 
 endchoice
 
+config THIN_ARCHIVES
+	bool
+	help
+	  Select this if the architecture wants to use thin archives
+	  instead of ld -r to create the built-in.o files.
+
+config LD_DEAD_CODE_DATA_ELIMINATION
+	bool
+	help
+	  Select this if the architecture wants to do dead code and
+	  data elimination with the linker by compiling with
+	  -ffunction-sections -fdata-sections and linking with
+	  --gc-sections.
+
+	  This requires that the arch annotates or otherwise protects
+	  its external entry points from being discarded. Linker scripts
+	  must also merge .text.*, .data.*, and .bss.* correctly into
+	  output sections. Care must be taken not to pull in unrelated
+	  sections (e.g., '.text.init'). Typically '.' in section names
+	  is used to distinguish them from label names / C identifiers.
+
 config HAVE_ARCH_WITHIN_STACK_FRAMES
 	bool
 	help

arch/alpha/include/asm/Kbuild

@@ -3,6 +3,7 @@
 generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += exec.h
+generic-y += export.h
 generic-y += irq_work.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h

arch/alpha/include/asm/uaccess.h

@@ -396,11 +396,12 @@ copy_to_user(void __user *to, const void *from, long n)
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
+	long res = n;
 	if (likely(__access_ok((unsigned long)from, n, get_fs())))
-		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
-	else
-		memset(to, 0, n);
-	return n;
+		res = __copy_from_user_inatomic(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 extern void __do_clear_user(void);

arch/alpha/kernel/Makefile

@@ -8,7 +8,7 @@ ccflags-y	:= -Wno-sign-compare
 
 obj-y    := entry.o traps.o process.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    alpha_ksyms.o systbls.o err_common.o io.o
+	    systbls.o err_common.o io.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o

arch/alpha/kernel/alpha_ksyms.c

-/*
- * linux/arch/alpha/kernel/alpha_ksyms.c
- *
- * Export the alpha-specific functions that are needed for loadable
- * modules.
- */
-
-#include <linux/module.h>
-#include <asm/console.h>
-#include <asm/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/fpu.h>
-#include <asm/machvec.h>
-
-#include <linux/syscalls.h>
-
-/* these are C runtime functions with special calling conventions: */
-extern void __divl (void);
-extern void __reml (void);
-extern void __divq (void);
-extern void __remq (void);
-extern void __divlu (void);
-extern void __remlu (void);
-extern void __divqu (void);
-extern void __remqu (void);
-
-EXPORT_SYMBOL(alpha_mv);
-EXPORT_SYMBOL(callback_getenv);
-EXPORT_SYMBOL(callback_setenv);
-EXPORT_SYMBOL(callback_save_env);
-
-/* platform dependent support */
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(__memcpy);
-EXPORT_SYMBOL(__memset);
-EXPORT_SYMBOL(___memset);
-EXPORT_SYMBOL(__memsetw);
-EXPORT_SYMBOL(__constant_c_memset);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(clear_page);
-
-EXPORT_SYMBOL(alpha_read_fp_reg);
-EXPORT_SYMBOL(alpha_read_fp_reg_s);
-EXPORT_SYMBOL(alpha_write_fp_reg);
-EXPORT_SYMBOL(alpha_write_fp_reg_s);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_tcpudp_magic);
-EXPORT_SYMBOL(ip_compute_csum);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-EXPORT_SYMBOL(csum_ipv6_magic);
-
-#ifdef CONFIG_MATHEMU_MODULE
-extern long (*alpha_fp_emul_imprecise)(struct pt_regs *, unsigned long);
-extern long (*alpha_fp_emul) (unsigned long pc);
-EXPORT_SYMBOL(alpha_fp_emul_imprecise);
-EXPORT_SYMBOL(alpha_fp_emul);
-#endif
-
-/*
- * The following are specially called from the uaccess assembly stubs.
- */
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(__do_clear_user);
-
-/* 
- * SMP-specific symbols.
- */
-
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(_atomic_dec_and_lock);
-#endif /* CONFIG_SMP */
-
-/*
- * The following are special because they're not called
- * explicitly (the C compiler or assembler generates them in
- * response to division operations).  Fortunately, their
- * interface isn't gonna change any time soon now, so it's OK
- * to leave it out of version control.
- */
-# undef memcpy
-# undef memset
-EXPORT_SYMBOL(__divl);
-EXPORT_SYMBOL(__divlu);
-EXPORT_SYMBOL(__divq);
-EXPORT_SYMBOL(__divqu);
-EXPORT_SYMBOL(__reml);
-EXPORT_SYMBOL(__remlu);
-EXPORT_SYMBOL(__remq);
-EXPORT_SYMBOL(__remqu);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memchr);

arch/alpha/kernel/machvec_impl.h

@@ -144,9 +144,11 @@
    else beforehand.  Fine.  We'll do it ourselves.  */
 #if 0
 #define ALIAS_MV(system) \
-  struct alpha_machine_vector alpha_mv __attribute__((alias(#system "_mv")));
+  struct alpha_machine_vector alpha_mv __attribute__((alias(#system "_mv"))); \
+  EXPORT_SYMBOL(alpha_mv);
 #else
 #define ALIAS_MV(system) \
-  asm(".global alpha_mv\nalpha_mv = " #system "_mv");
+  asm(".global alpha_mv\nalpha_mv = " #system "_mv"); \
+  EXPORT_SYMBOL(alpha_mv);
 #endif
 #endif /* GENERIC */

arch/alpha/kernel/ptrace.c

@@ -157,14 +157,16 @@ put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
 static inline int
 read_int(struct task_struct *task, unsigned long addr, int * data)
 {
-	int copied = access_process_vm(task, addr, data, sizeof(int), 0);
+	int copied = access_process_vm(task, addr, data, sizeof(int),
+			FOLL_FORCE);
 	return (copied == sizeof(int)) ? 0 : -EIO;
 }
 
 static inline int
 write_int(struct task_struct *task, unsigned long addr, int data)
 {
-	int copied = access_process_vm(task, addr, &data, sizeof(int), 1);
+	int copied = access_process_vm(task, addr, &data, sizeof(int),
+			FOLL_FORCE | FOLL_WRITE);
 	return (copied == sizeof(int)) ? 0 : -EIO;
 }
 
@@ -281,7 +283,8 @@ long arch_ptrace(struct task_struct *child, long request,
 	/* When I and D space are separate, these will need to be fixed.  */
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
 	case PTRACE_PEEKDATA:
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp),
+				FOLL_FORCE);
 		ret = -EIO;
 		if (copied != sizeof(tmp))
 			break;

arch/alpha/kernel/setup.c

@@ -115,6 +115,7 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE;
 
 #ifdef CONFIG_ALPHA_GENERIC
 struct alpha_machine_vector alpha_mv;
+EXPORT_SYMBOL(alpha_mv);
 #endif
 
 #ifndef alpha_using_srm

arch/alpha/lib/callback_srm.S

@@ -3,6 +3,7 @@
  */
 
 #include <asm/console.h>
+#include <asm/export.h>
 
 .text
 #define HWRPB_CRB_OFFSET 0xc0
@@ -92,6 +93,10 @@ CALLBACK(reset_env, CCB_RESET_ENV, 4)
 CALLBACK(save_env, CCB_SAVE_ENV, 1)
 CALLBACK(pswitch, CCB_PSWITCH, 3)
 CALLBACK(bios_emul, CCB_BIOS_EMUL, 5)
+
+EXPORT_SYMBOL(callback_getenv)
+EXPORT_SYMBOL(callback_setenv)
+EXPORT_SYMBOL(callback_save_env)
 	
 .data
 __alpha_using_srm:		# For use by bootpheader

arch/alpha/lib/checksum.c

@@ -48,6 +48,7 @@ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
 		(__force u64)saddr + (__force u64)daddr +
 		(__force u64)sum + ((len + proto) << 8));
 }
+EXPORT_SYMBOL(csum_tcpudp_magic);
 
 __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 			  __u32 len, __u8 proto, __wsum sum)
@@ -144,6 +145,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph,ihl*4);
 }
+EXPORT_SYMBOL(ip_fast_csum);
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -178,3 +180,4 @@ __sum16 ip_compute_csum(const void *buff, int len)
 {
 	return (__force __sum16)~from64to16(do_csum(buff,len));
 }
+EXPORT_SYMBOL(ip_compute_csum);

arch/alpha/lib/clear_page.S

@@ -3,7 +3,7 @@
  *
  * Zero an entire page.
  */
-
+#include <asm/export.h>
 	.text
 	.align 4
 	.global clear_page
@@ -37,3 +37,4 @@ clear_page:
 	nop
 
 	.end clear_page
+	EXPORT_SYMBOL(clear_page)

arch/alpha/lib/clear_user.S

@@ -24,6 +24,7 @@
  * Clobbers:
  *	$1,$2,$3,$4,$5,$6
  */
+#include <asm/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
@@ -111,3 +112,4 @@ $exception:
 	ret	$31, ($28), 1	# .. e1 :
 
 	.end __do_clear_user
+	EXPORT_SYMBOL(__do_clear_user)

arch/alpha/lib/copy_page.S

@@ -3,7 +3,7 @@
  *
  * Copy an entire page.
  */
-
+#include <asm/export.h>
 	.text
 	.align 4
 	.global copy_page
@@ -47,3 +47,4 @@ copy_page:
 	nop
 
 	.end copy_page
+	EXPORT_SYMBOL(copy_page)

arch/alpha/lib/copy_user.S

@@ -26,6 +26,8 @@
  *	$1,$2,$3,$4,$5,$6,$7
  */
 
+#include <asm/export.h>
+
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
 	99: x,##y;			\
@@ -124,22 +126,9 @@ $65:
 	bis $31,$31,$0
 $41:
 $35:
-$exitout:
-	ret $31,($28),1
-
 $exitin:
-	/* A stupid byte-by-byte zeroing of the rest of the output
-	   buffer.  This cures security holes by never leaving 
-	   random kernel data around to be copied elsewhere.  */
-
-	mov $0,$1
-$101:
-	EXO ( ldq_u $2,0($6) )
-	subq $1,1,$1
-	mskbl $2,$6,$2
-	EXO ( stq_u $2,0($6) )
-	addq $6,1,$6
-	bgt $1,$101
+$exitout:
 	ret $31,($28),1
 
 	.end __copy_user
+EXPORT_SYMBOL(__copy_user)

arch/alpha/lib/csum_ipv6_magic.S

@@ -12,6 +12,7 @@
  * added by Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  */
 
+#include <asm/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
@@ -113,3 +114,4 @@ csum_ipv6_magic:
 	ret			# .. e1 :
 
 	.end csum_ipv6_magic
+	EXPORT_SYMBOL(csum_ipv6_magic)

arch/alpha/lib/csum_partial_copy.c

@@ -374,6 +374,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 	}
 	return (__force __wsum)checksum;
 }
+EXPORT_SYMBOL(csum_partial_copy_from_user);
 
 __wsum
 csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
@@ -386,3 +387,4 @@ csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
 	set_fs(oldfs);
 	return checksum;
 }
+EXPORT_SYMBOL(csum_partial_copy_nocheck);

arch/alpha/lib/dec_and_lock.c

@@ -7,6 +7,7 @@
 
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
+#include <linux/export.h>
 
   asm (".text					\n\
 	.global _atomic_dec_and_lock		\n\
@@ -39,3 +40,4 @@ static int __used atomic_dec_and_lock_1(atomic_t *atomic, spinlock_t *lock)
 	spin_unlock(lock);
 	return 0;
 }
+EXPORT_SYMBOL(_atomic_dec_and_lock);

arch/alpha/lib/divide.S

@@ -45,6 +45,7 @@
  *	$28 - compare status
  */
 
+#include <asm/export.h>
 #define halt .long 0
 
 /*
@@ -151,6 +152,7 @@ ufunction:
 	addq	$30,STACK,$30
 	ret	$31,($23),1
 	.end	ufunction
+EXPORT_SYMBOL(ufunction)
 
 /*
  * Uhh.. Ugly signed division. I'd rather not have it at all, but
@@ -193,3 +195,4 @@ sfunction:
 	addq	$30,STACK,$30
 	ret	$31,($23),1
 	.end	sfunction
+EXPORT_SYMBOL(sfunction)

arch/alpha/lib/ev6-clear_page.S

@@ -3,7 +3,7 @@
  *
  * Zero an entire page.
  */
-
+#include <asm/export.h>
         .text
         .align 4
         .global clear_page
@@ -52,3 +52,4 @@ clear_page:
 	nop
 
 	.end clear_page
+	EXPORT_SYMBOL(clear_page)

arch/alpha/lib/ev6-clear_user.S

@@ -43,6 +43,7 @@
  *	want to leave a hole (and we also want to avoid repeating lots of work)
  */
 
+#include <asm/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
 	99: x,##y;			\
@@ -222,4 +223,4 @@ $exception:			# Destination for exception recovery(?)
 	nop			# .. E  .. ..	:
 	ret	$31, ($28), 1	# L0 .. .. ..	: L U L U
 	.end __do_clear_user
-
+	EXPORT_SYMBOL(__do_clear_user)