提交 25e56eba 编写于 作者: A Arnd Bergmann

clk: exynos: prepare for multiplatform

The new common clock drivers for exynos are using compile
time constants and soc_is_exynos* macros to provide backwards
compatibility for pre-DT systems, which is not possible with
multiplatform kernels. This moves all the necessary
information back into platform code and removes the mach/*
header inclusions.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Mike Turquette <mturquette@linaro.org>
上级 f4636d0a
......@@ -413,7 +413,7 @@ void __init exynos_init_time(void)
} else {
/* todo: remove after migrating legacy E4 platforms to dt */
#ifdef CONFIG_ARCH_EXYNOS4
exynos4_clk_init(NULL);
exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
#endif
mct_init();
......
......@@ -27,7 +27,7 @@ void exynos5_restart(char mode, const char *cmd);
void exynos_init_late(void);
/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
void exynos4_clk_init(struct device_node *np);
void exynos4_clk_init(struct device_node *np, int is_exynos4210, void __iomem *reg_base, unsigned long xom);
void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
#ifdef CONFIG_PM_GENERIC_DOMAINS
......
......@@ -16,7 +16,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <plat/cpu.h>
#include "clk.h"
#include "clk-pll.h"
......@@ -910,16 +909,6 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
CLK_IGNORE_UNUSED, 0),
};
#ifdef CONFIG_OF
static struct of_device_id exynos4_clk_ids[] __initdata = {
{ .compatible = "samsung,exynos4210-clock",
.data = (void *)EXYNOS4210, },
{ .compatible = "samsung,exynos4412-clock",
.data = (void *)EXYNOS4X12, },
{ },
};
#endif
/*
* The parent of the fin_pll clock is selected by the XOM[0] bit. This bit
* resides in chipid register space, outside of the clock controller memory
......@@ -927,33 +916,40 @@ static struct of_device_id exynos4_clk_ids[] __initdata = {
* controller is first remapped and the value of XOM[0] bit is read to
* determine the parent clock.
*/
static void __init exynos4_clk_register_finpll(void)
static unsigned long exynos4_get_xom(void)
{
struct samsung_fixed_rate_clock fclk;
unsigned long xom = 0;
void __iomem *chipid_base;
struct device_node *np;
struct clk *clk;
void __iomem *chipid_base = S5P_VA_CHIPID;
unsigned long xom, finpll_f = 24000000;
char *parent_name;
np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid");
if (np)
if (np) {
chipid_base = of_iomap(np, 0);
if (chipid_base) {
xom = readl(chipid_base + 8);
parent_name = xom & 1 ? "xusbxti" : "xxti";
clk = clk_get(NULL, parent_name);
if (IS_ERR(clk)) {
pr_err("%s: failed to lookup parent clock %s, assuming "
"fin_pll clock frequency is 24MHz\n", __func__,
parent_name);
} else {
finpll_f = clk_get_rate(clk);
}
if (chipid_base)
xom = readl(chipid_base + 8);
iounmap(chipid_base);
}
return xom;
}
static void __init exynos4_clk_register_finpll(unsigned long xom)
{
struct samsung_fixed_rate_clock fclk;
struct clk *clk;
unsigned long finpll_f = 24000000;
char *parent_name;
parent_name = xom & 1 ? "xusbxti" : "xxti";
clk = clk_get(NULL, parent_name);
if (IS_ERR(clk)) {
pr_err("%s: failed to lookup parent clock %s, assuming "
"fin_pll clock frequency is 24MHz\n", __func__,
parent_name);
} else {
pr_err("%s: failed to map chipid registers, assuming "
"fin_pll clock frequency is 24MHz\n", __func__);
finpll_f = clk_get_rate(clk);
}
fclk.id = fin_pll;
......@@ -963,8 +959,6 @@ static void __init exynos4_clk_register_finpll(void)
fclk.fixed_rate = finpll_f;
samsung_clk_register_fixed_rate(&fclk, 1);
if (np)
iounmap(chipid_base);
}
/*
......@@ -988,28 +982,14 @@ static __initdata struct of_device_id ext_clk_match[] = {
};
/* register exynos4 clocks */
void __init exynos4_clk_init(struct device_node *np)
void __init exynos4_clk_init(struct device_node *np, enum exynos4_soc exynos4_soc, void __iomem *reg_base, unsigned long xom)
{
void __iomem *reg_base;
struct clk *apll, *mpll, *epll, *vpll;
u32 exynos4_soc;
if (np) {
const struct of_device_id *match;
match = of_match_node(exynos4_clk_ids, np);
exynos4_soc = (u32)match->data;
reg_base = of_iomap(np, 0);
if (!reg_base)
panic("%s: failed to map registers\n", __func__);
} else {
reg_base = S5P_VA_CMU;
if (soc_is_exynos4210())
exynos4_soc = EXYNOS4210;
else if (soc_is_exynos4212() || soc_is_exynos4412())
exynos4_soc = EXYNOS4X12;
else
panic("%s: unable to determine soc\n", __func__);
}
if (exynos4_soc == EXYNOS4210)
......@@ -1026,7 +1006,7 @@ void __init exynos4_clk_init(struct device_node *np)
ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
ext_clk_match);
exynos4_clk_register_finpll();
exynos4_clk_register_finpll(xom);
if (exynos4_soc == EXYNOS4210) {
apll = samsung_clk_register_pll45xx("fout_apll", "fin_pll",
......@@ -1087,5 +1067,16 @@ void __init exynos4_clk_init(struct device_node *np)
_get_rate("sclk_epll"), _get_rate("sclk_vpll"),
_get_rate("arm_clk"));
}
CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4_clk_init);
CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4_clk_init);
static void __init exynos4210_clk_init(struct device_node *np)
{
exynos4_clk_init(np, EXYNOS4210, NULL, exynos4_get_xom());
}
CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4210_clk_init);
static void __init exynos4412_clk_init(struct device_node *np)
{
exynos4_clk_init(np, EXYNOS4X12, NULL, exynos4_get_xom());
}
CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4412_clk_init);
......@@ -16,7 +16,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <plat/cpu.h>
#include "clk.h"
#include "clk-pll.h"
......
......@@ -15,7 +15,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <plat/cpu.h>
#include "clk.h"
#include "clk-pll.h"
......
......@@ -20,8 +20,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <mach/map.h>
/**
* struct samsung_clock_alias: information about mux clock
* @id: platform specific id of the clock.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册