ARM: Kirkwood: Describe iConnects LEDs in DT.

Signed-off-by: NAndrew Lunn <andrew@lunn.ch>

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -31,4 +31,38 @@
 			status = "ok";
 		};
 	};
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-level {
+			label = "led_level";
+			gpios = <&gpio1 9 0>;
+			linux,default-trigger = "default-on";
+		};
+		power-blue {
+			label = "power:blue";
+			gpios = <&gpio1 11 0>;
+			linux,default-trigger = "timer";
+		};
+		usb1 {
+			label = "usb1:blue";
+			gpios = <&gpio1 12 0>;
+		};
+		usb2 {
+			label = "usb2:blue";
+			gpios = <&gpio1 13 0>;
+		};
+		usb3 {
+			label = "usb3:blue";
+			gpios = <&gpio1 14 0>;
+		};
+		usb4 {
+			label = "usb4:blue";
+			gpios = <&gpio1 15 0>;
+		};
+		otb {
+			label = "otb:blue";
+			gpios = <&gpio1 16 0>;
+		};
+	};
 };

arch/arm/mach-kirkwood/board-iconnect.c

@@ -19,7 +19,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <asm/mach/arch.h>
@@ -31,50 +30,6 @@ static struct mv643xx_eth_platform_data iconnect_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
 };
 
-static struct gpio_led iconnect_led_pins[] = {
-	{
-		.name		= "led_level",
-		.gpio		= 41,
-		.default_trigger = "default-on",
-	}, {
-		.name		= "power:blue",
-		.gpio		= 42,
-		.default_trigger = "timer",
-	}, {
-		.name		= "power:red",
-		.gpio		= 43,
-	}, {
-		.name		= "usb1:blue",
-		.gpio		= 44,
-	}, {
-		.name		= "usb2:blue",
-		.gpio		= 45,
-	}, {
-		.name		= "usb3:blue",
-		.gpio		= 46,
-	}, {
-		.name		= "usb4:blue",
-		.gpio		= 47,
-	}, {
-		.name		= "otb:blue",
-		.gpio		= 48,
-	},
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
-	.leds		= iconnect_led_pins,
-	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
-	.gpio_blink_set	= orion_gpio_led_blink_set,
-};
-
-static struct platform_device iconnect_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &iconnect_led_data,
-	}
-};
-
 static unsigned int iconnect_mpp_config[] __initdata = {
 	MPP12_GPIO,
 	MPP35_GPIO,
@@ -140,7 +95,6 @@ void __init iconnect_init(void)
 	kirkwood_ge00_init(&iconnect_ge00_data);
 
 	platform_device_register(&iconnect_button_device);
-	platform_device_register(&iconnect_leds);
 }
 
 static int __init iconnect_pci_init(void)