提交 24ca39d6 编写于 作者: R Rafał Miłecki 提交者: John W. Linville

b43: bus: abstract bus and core operations

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 79d2232f
......@@ -881,6 +881,29 @@ static inline enum ieee80211_band b43_current_band(struct b43_wl *wl)
return wl->hw->conf.channel->band;
}
static inline int b43_bus_may_powerdown(struct b43_wldev *wldev)
{
return wldev->dev->bus_may_powerdown(wldev->dev);
}
static inline int b43_bus_powerup(struct b43_wldev *wldev, bool dynamic_pctl)
{
return wldev->dev->bus_powerup(wldev->dev, dynamic_pctl);
}
static inline int b43_device_is_enabled(struct b43_wldev *wldev)
{
return wldev->dev->device_is_enabled(wldev->dev);
}
static inline void b43_device_enable(struct b43_wldev *wldev,
u32 core_specific_flags)
{
wldev->dev->device_enable(wldev->dev, core_specific_flags);
}
static inline void b43_device_disable(struct b43_wldev *wldev,
u32 core_specific_flags)
{
wldev->dev->device_disable(wldev->dev, core_specific_flags);
}
static inline u16 b43_read16(struct b43_wldev *dev, u16 offset)
{
return dev->dev->read16(dev->dev, offset);
......
......@@ -25,6 +25,31 @@
/* SSB */
static inline int b43_bus_ssb_bus_may_powerdown(struct b43_bus_dev *dev)
{
return ssb_bus_may_powerdown(dev->sdev->bus);
}
static inline int b43_bus_ssb_bus_powerup(struct b43_bus_dev *dev,
bool dynamic_pctl)
{
return ssb_bus_powerup(dev->sdev->bus, dynamic_pctl);
}
static inline int b43_bus_ssb_device_is_enabled(struct b43_bus_dev *dev)
{
return ssb_device_is_enabled(dev->sdev);
}
static inline void b43_bus_ssb_device_enable(struct b43_bus_dev *dev,
u32 core_specific_flags)
{
ssb_device_enable(dev->sdev, core_specific_flags);
}
static inline void b43_bus_ssb_device_disable(struct b43_bus_dev *dev,
u32 core_specific_flags)
{
ssb_device_disable(dev->sdev, core_specific_flags);
}
static inline u16 b43_bus_ssb_read16(struct b43_bus_dev *dev, u16 offset)
{
return ssb_read16(dev->sdev, offset);
......@@ -63,6 +88,12 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
dev->bus_type = B43_BUS_SSB;
dev->sdev = sdev;
dev->bus_may_powerdown = b43_bus_ssb_bus_may_powerdown;
dev->bus_powerup = b43_bus_ssb_bus_powerup;
dev->device_is_enabled = b43_bus_ssb_device_is_enabled;
dev->device_enable = b43_bus_ssb_device_enable;
dev->device_disable = b43_bus_ssb_device_disable;
dev->read16 = b43_bus_ssb_read16;
dev->read32 = b43_bus_ssb_read32;
dev->write16 = b43_bus_ssb_write16;
......
......@@ -11,6 +11,14 @@ struct b43_bus_dev {
struct ssb_device *sdev;
};
int (*bus_may_powerdown)(struct b43_bus_dev *dev);
int (*bus_powerup)(struct b43_bus_dev *dev, bool dynamic_pctl);
int (*device_is_enabled)(struct b43_bus_dev *dev);
void (*device_enable)(struct b43_bus_dev *dev,
u32 core_specific_flags);
void (*device_disable)(struct b43_bus_dev *dev,
u32 core_specific_flags);
u16 (*read16)(struct b43_bus_dev *dev, u16 offset);
u32 (*read32)(struct b43_bus_dev *dev, u16 offset);
void (*write16)(struct b43_bus_dev *dev, u16 offset, u16 value);
......
......@@ -1152,7 +1152,7 @@ static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, u32 flags)
flags |= B43_TMSLOW_PHYRESET;
if (dev->phy.type == B43_PHYTYPE_N)
flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */
ssb_device_enable(dev->sdev, flags);
b43_device_enable(dev, flags);
msleep(2); /* Wait for the PLL to turn on. */
/* Now take the PHY out of Reset again */
......@@ -4310,8 +4310,8 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
dev->wl->current_beacon = NULL;
}
ssb_device_disable(dev->sdev, 0);
ssb_bus_may_powerdown(dev->sdev->bus);
b43_device_disable(dev, 0);
b43_bus_may_powerdown(dev);
}
/* Initialize a wireless core */
......@@ -4326,10 +4326,10 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
err = ssb_bus_powerup(bus, 0);
err = b43_bus_powerup(dev, 0);
if (err)
goto out;
if (!ssb_device_is_enabled(dev->sdev)) {
if (!b43_device_is_enabled(dev)) {
tmp = phy->gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
}
......@@ -4414,7 +4414,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
b43_set_synth_pu_delay(dev, 1);
b43_bluetooth_coext_enable(dev);
ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_bus_powerup(dev, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
......@@ -4431,7 +4431,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
err_chip_exit:
b43_chip_exit(dev);
err_busdown:
ssb_bus_may_powerdown(bus);
b43_bus_may_powerdown(dev);
B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
return err;
}
......@@ -4750,7 +4750,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
* that in core_init(), too.
*/
err = ssb_bus_powerup(bus, 0);
err = b43_bus_powerup(dev, 0);
if (err) {
b43err(wl, "Bus powerup failed\n");
goto out;
......@@ -4832,8 +4832,8 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
INIT_WORK(&dev->restart_work, b43_chip_reset);
dev->phy.ops->switch_analog(dev, 0);
ssb_device_disable(dev->sdev, 0);
ssb_bus_may_powerdown(bus);
b43_device_disable(dev, 0);
b43_bus_may_powerdown(dev);
out:
return err;
......@@ -4841,7 +4841,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
err_phy_free:
b43_phy_free(dev);
err_powerdown:
ssb_bus_may_powerdown(bus);
b43_bus_may_powerdown(dev);
return err;
}
......
......@@ -37,17 +37,16 @@ void b43_rfkill_poll(struct ieee80211_hw *hw)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
struct ssb_bus *bus = dev->sdev->bus;
bool enabled;
bool brought_up = false;
mutex_lock(&wl->mutex);
if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) {
if (ssb_bus_powerup(bus, 0)) {
if (b43_bus_powerup(dev, 0)) {
mutex_unlock(&wl->mutex);
return;
}
ssb_device_enable(dev->sdev, 0);
b43_device_enable(dev, 0);
brought_up = true;
}
......@@ -63,8 +62,8 @@ void b43_rfkill_poll(struct ieee80211_hw *hw)
}
if (brought_up) {
ssb_device_disable(dev->sdev, 0);
ssb_bus_may_powerdown(bus);
b43_device_disable(dev, 0);
b43_bus_may_powerdown(dev);
}
mutex_unlock(&wl->mutex);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册