drm/i915: fix issue in display pipe setup on IGDNG

During pipe DPMS off, instead of busy waiting pipe off, insert
delays during wait and don't loop after enough tries which matches
spec requirement. Also try to match DPMS on path by disable FDI TX
PLL in DPMS off. Disable PF by writing PF_WIN_SZ which really trigger
the update.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

drivers/gpu/drm/i915/i915_reg.h

@@ -1848,6 +1848,8 @@
 #define PFA_CTL_1               0x68080
 #define PFB_CTL_1               0x68880
 #define  PF_ENABLE              (1<<31)
+#define PFA_WIN_SZ		0x68074
+#define PFB_WIN_SZ		0x68874
 
 /* legacy palette */
 #define LGC_PALETTE_A           0x4a000

drivers/gpu/drm/i915/intel_display.c

@@ -1038,6 +1038,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
 	int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
 	int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
+	int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
 	int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
 	int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
 	int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
@@ -1051,7 +1052,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int trans_vblank_reg = (pipe == 0) ? TRANS_VBLANK_A : TRANS_VBLANK_B;
 	int trans_vsync_reg = (pipe == 0) ? TRANS_VSYNC_A : TRANS_VSYNC_B;
 	u32 temp;
-	int tries = 5, j;
+	int tries = 5, j, n;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
@@ -1239,19 +1240,21 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 		if ((temp & PIPEACONF_ENABLE) != 0) {
 			I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
 			I915_READ(pipeconf_reg);
+			n = 0;
 			/* wait for cpu pipe off, pipe state */
-			while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0)
-				;
+			while ((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) != 0) {
+				n++;
+				if (n < 60) {
+					udelay(500);
+					continue;
+				} else {
+					DRM_DEBUG("pipe %d off delay\n", pipe);
+					break;
+				}
+			}
 		} else
 			DRM_DEBUG("crtc %d is disabled\n", pipe);
 
-		/* IGDNG-A : disable cpu panel fitter ? */
-		temp = I915_READ(pf_ctl_reg);
-		if ((temp & PF_ENABLE) != 0) {
-			I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
-			I915_READ(pf_ctl_reg);
-		}
-
 		/* disable CPU FDI tx and PCH FDI rx */
 		temp = I915_READ(fdi_tx_reg);
 		I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_ENABLE);
@@ -1261,6 +1264,8 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 		I915_WRITE(fdi_rx_reg, temp & ~FDI_RX_ENABLE);
 		I915_READ(fdi_rx_reg);
 
+		udelay(100);
+
 		/* still set train pattern 1 */
 		temp = I915_READ(fdi_tx_reg);
 		temp &= ~FDI_LINK_TRAIN_NONE;
@@ -1272,14 +1277,25 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 		temp |= FDI_LINK_TRAIN_PATTERN_1;
 		I915_WRITE(fdi_rx_reg, temp);
 
+		udelay(100);
+
 		/* disable PCH transcoder */
 		temp = I915_READ(transconf_reg);
 		if ((temp & TRANS_ENABLE) != 0) {
 			I915_WRITE(transconf_reg, temp & ~TRANS_ENABLE);
 			I915_READ(transconf_reg);
+			n = 0;
 			/* wait for PCH transcoder off, transcoder state */
-			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0)
-				;
+			while ((I915_READ(transconf_reg) & TRANS_STATE_ENABLE) != 0) {
+				n++;
+				if (n < 60) {
+					udelay(500);
+					continue;
+				} else {
+					DRM_DEBUG("transcoder %d off delay\n", pipe);
+					break;
+				}
+			}
 		}
 
 		/* disable PCH DPLL */
@@ -1297,6 +1313,22 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(fdi_rx_reg);
 		}
 
+		/* Disable CPU FDI TX PLL */
+		temp = I915_READ(fdi_tx_reg);
+		if ((temp & FDI_TX_PLL_ENABLE) != 0) {
+			I915_WRITE(fdi_tx_reg, temp & ~FDI_TX_PLL_ENABLE);
+			I915_READ(fdi_tx_reg);
+			udelay(100);
+		}
+
+		/* Disable PF */
+		temp = I915_READ(pf_ctl_reg);
+		if ((temp & PF_ENABLE) != 0) {
+			I915_WRITE(pf_ctl_reg, temp & ~PF_ENABLE);
+			I915_READ(pf_ctl_reg);
+		}
+		I915_WRITE(pf_win_size, 0);
+
 		/* Wait for the clocks to turn off. */
 		udelay(150);
 		break;