提交 24549e2a 编写于 作者: S Sergei Shtylyov 提交者: David S. Miller

sh_eth: get SH7757 support out of #ifdef

Get the SH7757 code/data in the driver out of #ifdef by adding "sh7757-ether"
and "sh7757-gether" to the platform driver's ID table.  Note that we can remove
SH_ETH_HAS_BOTH_MODULES and sh_eth_get_cpu_data().
Change the Ether/GEther platform devices' names in the SH platform code
accordingly.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 f5d12767
......@@ -82,7 +82,7 @@ static struct sh_eth_plat_data sh7757_eth0_pdata = {
};
static struct platform_device sh7757_eth0_device = {
.name = "sh-eth",
.name = "sh7757-ether",
.resource = sh_eth0_resources,
.id = 0,
.num_resources = ARRAY_SIZE(sh_eth0_resources),
......@@ -111,7 +111,7 @@ static struct sh_eth_plat_data sh7757_eth1_pdata = {
};
static struct platform_device sh7757_eth1_device = {
.name = "sh-eth",
.name = "sh7757-ether",
.resource = sh_eth1_resources,
.id = 1,
.num_resources = ARRAY_SIZE(sh_eth1_resources),
......@@ -157,7 +157,7 @@ static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
};
static struct platform_device sh7757_eth_giga0_device = {
.name = "sh-eth",
.name = "sh7757-gether",
.resource = sh_eth_giga0_resources,
.id = 2,
.num_resources = ARRAY_SIZE(sh_eth_giga0_resources),
......@@ -192,7 +192,7 @@ static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
};
static struct platform_device sh7757_eth_giga1_device = {
.name = "sh-eth",
.name = "sh7757-gether",
.resource = sh_eth_giga1_resources,
.id = 3,
.num_resources = ARRAY_SIZE(sh_eth_giga1_resources),
......
......@@ -431,10 +431,9 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
.rpadir = 1,
.rpadir_value = 0x00020000, /* NET_IP_ALIGN assumed to be 2 */
};
#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
#define SH_ETH_HAS_BOTH_MODULES 1
#endif
static void sh_eth_set_rate(struct net_device *ndev)
static void sh_eth_set_rate_sh7757(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
......@@ -451,9 +450,9 @@ static void sh_eth_set_rate(struct net_device *ndev)
}
/* SH7757 */
static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate,
static struct sh_eth_cpu_data sh7757_data = {
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_sh7757,
.eesipr_value = DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff,
.rmcr_value = 0x00000001,
......@@ -518,7 +517,7 @@ static void sh_eth_set_rate_giga(struct net_device *ndev)
}
/* SH7757(GETHERC) */
static struct sh_eth_cpu_data sh_eth_my_cpu_data_giga = {
static struct sh_eth_cpu_data sh7757_data_giga = {
.chip_reset = sh_eth_chip_reset_giga,
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate_giga,
......@@ -549,15 +548,6 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data_giga = {
.tsu = 1,
};
static struct sh_eth_cpu_data *sh_eth_get_cpu_data(struct sh_eth_private *mdp)
{
if (sh_eth_is_gether(mdp))
return &sh_eth_my_cpu_data_giga;
else
return &sh_eth_my_cpu_data;
}
#endif
static void sh_eth_chip_reset(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
......@@ -2577,11 +2567,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
mdp->reg_offset = sh_eth_get_register_offset(pd->register_type);
/* set cpu data */
#if defined(SH_ETH_HAS_BOTH_MODULES)
mdp->cd = sh_eth_get_cpu_data(mdp);
#else
mdp->cd = &sh_eth_my_cpu_data;
#endif
if (id->driver_data)
mdp->cd = (struct sh_eth_cpu_data *)id->driver_data;
sh_eth_set_default_cpu_data(mdp->cd);
......@@ -2702,6 +2688,8 @@ static struct platform_device_id sh_eth_id_table[] = {
{ "sh7619-ether", (kernel_ulong_t)&sh7619_data },
{ "sh771x-ether", (kernel_ulong_t)&sh771x_data },
{ "sh7734-gether", (kernel_ulong_t)&sh7734_data },
{ "sh7757-ether", (kernel_ulong_t)&sh7757_data },
{ "sh7757-gether", (kernel_ulong_t)&sh7757_data_giga },
{ "sh7763-gether", (kernel_ulong_t)&sh7763_data },
{ "r8a7740-gether", (kernel_ulong_t)&r8a7740_data },
{ CARDNAME },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册