提交 2445e461 编写于 作者: M Matt Carlson 提交者: David S. Miller

tg3: Replace pr_err with sensible alternatives

All the instances of pr_err() in the tg3 driver have better
alternatives.  This patch replaces all pr_err() calls.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBenjamin Li <benli@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 6d40db7b
......@@ -6433,8 +6433,9 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
}
if (i == MAX_WAIT_CNT && !silent) {
pr_err("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
dev_err(&tp->pdev->dev,
"tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
}
......@@ -10648,7 +10649,8 @@ static int tg3_test_registers(struct tg3 *tp)
out:
if (netif_msg_hw(tp))
pr_err("Register test failed at offset %x\n", offset);
netdev_err(tp->dev,
"Register test failed at offset %x\n", offset);
tw32(offset, save_val);
return -EIO;
}
......@@ -13223,7 +13225,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
if (!tp->pcix_cap) {
pr_err("Cannot find PCI-X capability, aborting\n");
dev_err(&tp->pdev->dev,
"Cannot find PCI-X capability, aborting\n");
return -EIO;
}
......@@ -13420,7 +13423,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
pr_err("(%s) transition to D0 failed\n", pci_name(tp->pdev));
dev_err(&tp->pdev->dev, "Transition to D0 failed\n");
return err;
}
......@@ -13594,8 +13597,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
err = tg3_phy_probe(tp);
if (err) {
pr_err("(%s) phy probe failed, err %d\n",
pci_name(tp->pdev), err);
dev_err(&tp->pdev->dev, "phy probe failed, err %d\n", err);
/* ... but do not return immediately ... */
tg3_mdio_fini(tp);
}
......@@ -14104,8 +14106,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Send the buffer to the chip. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 1);
if (ret) {
pr_err("tg3_test_dma() Write the buffer failed %d\n",
ret);
dev_err(&tp->pdev->dev,
"%s: Buffer write failed. err = %d\n",
__func__, ret);
break;
}
......@@ -14115,8 +14118,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
u32 val;
tg3_read_mem(tp, 0x2100 + (i*4), &val);
if (le32_to_cpu(val) != p[i]) {
pr_err(" tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n",
val, i);
dev_err(&tp->pdev->dev,
"%s: Buffer corrupted on device! "
"(%d != %d)\n", __func__, val, i);
/* ret = -ENODEV here? */
}
p[i] = 0;
......@@ -14125,9 +14129,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Now read it back. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0);
if (ret) {
pr_err("tg3_test_dma() Read the buffer failed %d\n",
ret);
dev_err(&tp->pdev->dev,
"%s: Buffer read failed. err = %d\n",
__func__, ret);
break;
}
......@@ -14143,8 +14147,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
break;
} else {
pr_err("tg3_test_dma() buffer corrupted on read back! (%d != %d)\n",
p[i], i);
dev_err(&tp->pdev->dev,
"%s: Buffer corrupted on read back! "
"(%d != %d)\n", __func__, p[i], i);
ret = -ENODEV;
goto out;
}
......@@ -14436,13 +14441,13 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
pr_err("Cannot enable PCI device, aborting\n");
dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
return err;
}
err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
pr_err("Cannot obtain PCI resources, aborting\n");
dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
goto err_out_disable_pdev;
}
......@@ -14451,14 +14456,15 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
pr_err("Cannot find PowerManagement capability, aborting\n");
dev_err(&pdev->dev,
"Cannot find Power Management capability, aborting\n");
err = -EIO;
goto err_out_free_res;
}
dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS);
if (!dev) {
pr_err("Etherdev alloc failed, aborting\n");
dev_err(&pdev->dev, "Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto err_out_free_res;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册