ath10k: fix a bunch of spelling mistakes in messages

Fix the following spelling mistakes in messages:
  syncronise -> synchronize
  unusally -> unusually
  addrress -> address
  inverval -> interval
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/mac.c

@@ -1392,7 +1392,7 @@ static int ath10k_vdev_stop(struct ath10k_vif *arvif)
 
 	ret = ath10k_vdev_setup_sync(ar);
 	if (ret) {
-		ath10k_warn(ar, "failed to syncronise setup for vdev %i: %d\n",
+		ath10k_warn(ar, "failed to synchronize setup for vdev %i: %d\n",
 			    arvif->vdev_id, ret);
 		return ret;
 	}

drivers/net/wireless/ath/ath10k/pci.c

@@ -469,7 +469,7 @@ static int ath10k_pci_wake_wait(struct ath10k *ar)
 	while (tot_delay < PCIE_WAKE_TIMEOUT) {
 		if (ath10k_pci_is_awake(ar)) {
 			if (tot_delay > PCIE_WAKE_LATE_US)
-				ath10k_warn(ar, "device wakeup took %d ms which is unusally long, otherwise it works normally.\n",
+				ath10k_warn(ar, "device wakeup took %d ms which is unusually long, otherwise it works normally.\n",
 					    tot_delay / 1000);
 			return 0;
 		}

drivers/net/wireless/ath/ath10k/sdio.c

@@ -1553,7 +1553,7 @@ static int ath10k_sdio_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
 	/* read the data */
 	ret = ath10k_sdio_read(ar, MBOX_WINDOW_DATA_ADDRESS, buf, buf_len);
 	if (ret) {
-		ath10k_warn(ar, "failed to read from mbox window data addrress: %d\n",
+		ath10k_warn(ar, "failed to read from mbox window data address: %d\n",
 			    ret);
 		return ret;
 	}
@@ -1592,7 +1592,7 @@ static int ath10k_sdio_hif_diag_write_mem(struct ath10k *ar, u32 address,
 	ret = ath10k_sdio_write(ar, MBOX_WINDOW_DATA_ADDRESS, data, nbytes);
 	if (ret) {
 		ath10k_warn(ar,
-			    "failed to write 0x%p to mbox window data addrress: %d\n",
+			    "failed to write 0x%p to mbox window data address: %d\n",
 			    data, ret);
 		return ret;
 	}

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -2022,7 +2022,7 @@ ath10k_wmi_tlv_op_gen_sta_keepalive(struct ath10k *ar,
 	arp->dest_ip4_addr = arg->dest_ip4_addr;
 	ether_addr_copy(arp->dest_mac_addr.addr, arg->dest_mac_addr);
 
-	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv sta keepalive vdev %d enabled %d method %d inverval %d\n",
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv sta keepalive vdev %d enabled %d method %d interval %d\n",
 		   arg->vdev_id, arg->enabled, arg->method, arg->interval);
 	return skb;
 }