Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 23159a0b 编写于 作者: D Devin Heitmueller 提交者： Mauro Carvalho Chehab
浏览文件
操作

V4L/DVB (9658): em28xx: use em28xx_write_reg() for i2c clock setup 

Convert the calls that write the i2c clock register over to the new
em28xx_write_reg() function that allows for or'ing bits
Signed-off-by: NDevin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 b6972489
隐藏空白更改
内联 并排
Showing with 58 addition and 15 deletion
drivers/media/video/em28xx/em28xx-cards.c
浏览文件 @ 23159a0b
......@@ -1400,7 +1400,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2883_BOARD_KWORLD_HYBRID_A316:
case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
msleep(50);
/* Sets GPO/GPIO sequences for this device */
......@@ -1412,7 +1414,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2882_BOARD_TERRATEC_HYBRID_XS:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
msleep(50);
/* should be added ir_codes here */
......@@ -1432,7 +1436,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2870_BOARD_KWORLD_350U:
case EM2881_BOARD_DNT_DA2_HYBRID:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
msleep(50);
/* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
......@@ -1449,7 +1455,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2880_BOARD_MSI_DIGIVOX_AD:
case EM2880_BOARD_MSI_DIGIVOX_AD_II:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
msleep(50);
/* Sets GPO/GPIO sequences for this device */
......@@ -1466,7 +1474,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2861_BOARD_PLEXTOR_PX_TV100U:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* FIXME guess */
/* Turn on analog audio output */
em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
......@@ -1475,7 +1485,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x4c", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
msleep(10);
em28xx_write_regs(dev, 0x08, "\x6d", 1);
msleep(10);
......@@ -1485,7 +1497,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2870_BOARD_KWORLD_355U:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
msleep(50);
/* Sets GPO/GPIO sequences for this device */
......@@ -1494,7 +1508,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2870_BOARD_COMPRO_VIDEOMATE:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* TODO: someone can do some cleanup here...
not everything's needed */
em28xx_write_regs(dev, 0x04, "\x00", 1);
......@@ -1513,7 +1529,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2870_BOARD_TERRATEC_XS_MT2060:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* this device needs some gpio writes to get the DVB-T
demod work */
em28xx_write_regs(dev, 0x08, "\xfe", 1);
......@@ -1525,7 +1543,10 @@ void em28xx_pre_card_setup(struct em28xx *dev)
break;
case EM2870_BOARD_PINNACLE_PCTV_DVB:
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* this device needs some gpio writes to get the
DVB-T demod work */
em28xx_write_regs(dev, 0x08, "\xfe", 1);
......@@ -1541,7 +1562,9 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2820_BOARD_GADMEI_UTV310:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* Turn on analog audio output */
em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
break;
......@@ -1549,20 +1572,27 @@ void em28xx_pre_card_setup(struct em28xx *dev)
case EM2860_BOARD_GADMEI_UTV330:
/* Turn on IR */
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* should be added ir_codes here */
break;
case EM2820_BOARD_MSI_VOX_USB_2:
em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1);
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ);
/* enables audio for that device */
em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
break;
case EM2874_BOARD_PINNACLE_PCTV_80E:
/* Set 400 KHz clock */
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1);
/* Set 400 KHz clock and select secondary i2c bus */
em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
EM28XX_I2C_CLK_WAIT_ENABLE |
EM2874_I2C_SECONDARY_BUS_SELECT |
EM28XX_I2C_FREQ_400_KHZ);
dev->digital_gpio = em2874_pinnacle_80e_digital;
break;
......
drivers/media/video/em28xx/em28xx-reg.h
浏览文件 @ 23159a0b
......@@ -32,6 +32,19 @@
#define EM28XX_R08_GPIO 0x08 /* em2820 or upper */
#define EM28XX_R06_I2C_CLK 0x06
/* em28xx I2C Clock Register (0x06) */
#define EM28XX_I2C_CLK_ACK_LAST_READ 0x80
#define EM28XX_I2C_CLK_WAIT_ENABLE 0x40
#define EM28XX_I2C_EEPROM_ON_BOARD 0x08
#define EM28XX_I2C_EEPROM_KEY_VALID 0x04
#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */
#define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */
#define EM28XX_I2C_FREQ_25_KHZ 0x02
#define EM28XX_I2C_FREQ_400_KHZ 0x01
#define EM28XX_I2C_FREQ_100_KHZ 0x00
#define EM28XX_R0A_CHIPID 0x0a
#define EM28XX_R0C_USBSUSP 0x0c /* */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或