提交 22c21003 编写于 作者: W Wu Zhangjin 提交者: Ralf Baechle

MIPS: Lemote 2F: Add basic CS5536 VSM support

Lemote Loongson 2F family machines use CS5536 as their south bridge and need
these lowlevel interfaces to access the devices on CS5536.

Virtualize the legacy devices on CS5536 as PCI devices.  This way users can
access the CS5536 PCI config space directly as a normal multi-function
PCI 2.2 device.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: zhangfx@lemote.com
Cc: yanh@lemote.com 
Cc: huhb@lemote.com
Cc: Nicholas Mc Guire <hofrat@hofr.at>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: loongson-dev@googlegroups.com
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 21a41faa
/*
* The header file of cs5536 sourth bridge.
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu <liujl@lemote.com>
*/
#ifndef _CS5536_H
#define _CS5536_H
#include <linux/types.h>
extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
extern void _wrmsr(u32 msr, u32 hi, u32 lo);
/*
* MSR module base
*/
#define CS5536_SB_MSR_BASE (0x00000000)
#define CS5536_GLIU_MSR_BASE (0x10000000)
#define CS5536_ILLEGAL_MSR_BASE (0x20000000)
#define CS5536_USB_MSR_BASE (0x40000000)
#define CS5536_IDE_MSR_BASE (0x60000000)
#define CS5536_DIVIL_MSR_BASE (0x80000000)
#define CS5536_ACC_MSR_BASE (0xa0000000)
#define CS5536_UNUSED_MSR_BASE (0xc0000000)
#define CS5536_GLCP_MSR_BASE (0xe0000000)
#define SB_MSR_REG(offset) (CS5536_SB_MSR_BASE | (offset))
#define GLIU_MSR_REG(offset) (CS5536_GLIU_MSR_BASE | (offset))
#define ILLEGAL_MSR_REG(offset) (CS5536_ILLEGAL_MSR_BASE | (offset))
#define USB_MSR_REG(offset) (CS5536_USB_MSR_BASE | (offset))
#define IDE_MSR_REG(offset) (CS5536_IDE_MSR_BASE | (offset))
#define DIVIL_MSR_REG(offset) (CS5536_DIVIL_MSR_BASE | (offset))
#define ACC_MSR_REG(offset) (CS5536_ACC_MSR_BASE | (offset))
#define UNUSED_MSR_REG(offset) (CS5536_UNUSED_MSR_BASE | (offset))
#define GLCP_MSR_REG(offset) (CS5536_GLCP_MSR_BASE | (offset))
/*
* BAR SPACE OF VIRTUAL PCI :
* range for pci probe use, length is the actual size.
*/
/* IO space for all DIVIL modules */
#define CS5536_IRQ_RANGE 0xffffffe0 /* USERD FOR PCI PROBE */
#define CS5536_IRQ_LENGTH 0x20 /* THE REGS ACTUAL LENGTH */
#define CS5536_SMB_RANGE 0xfffffff8
#define CS5536_SMB_LENGTH 0x08
#define CS5536_GPIO_RANGE 0xffffff00
#define CS5536_GPIO_LENGTH 0x100
#define CS5536_MFGPT_RANGE 0xffffffc0
#define CS5536_MFGPT_LENGTH 0x40
#define CS5536_ACPI_RANGE 0xffffffe0
#define CS5536_ACPI_LENGTH 0x20
#define CS5536_PMS_RANGE 0xffffff80
#define CS5536_PMS_LENGTH 0x80
/* IO space for IDE */
#define CS5536_IDE_RANGE 0xfffffff0
#define CS5536_IDE_LENGTH 0x10
/* IO space for ACC */
#define CS5536_ACC_RANGE 0xffffff80
#define CS5536_ACC_LENGTH 0x80
/* MEM space for ALL USB modules */
#define CS5536_OHCI_RANGE 0xfffff000
#define CS5536_OHCI_LENGTH 0x1000
#define CS5536_EHCI_RANGE 0xfffff000
#define CS5536_EHCI_LENGTH 0x1000
/*
* PCI MSR ACCESS
*/
#define PCI_MSR_CTRL 0xF0
#define PCI_MSR_ADDR 0xF4
#define PCI_MSR_DATA_LO 0xF8
#define PCI_MSR_DATA_HI 0xFC
/**************** MSR *****************************/
/*
* GLIU STANDARD MSR
*/
#define GLIU_CAP 0x00
#define GLIU_CONFIG 0x01
#define GLIU_SMI 0x02
#define GLIU_ERROR 0x03
#define GLIU_PM 0x04
#define GLIU_DIAG 0x05
/*
* GLIU SPEC. MSR
*/
#define GLIU_P2D_BM0 0x20
#define GLIU_P2D_BM1 0x21
#define GLIU_P2D_BM2 0x22
#define GLIU_P2D_BMK0 0x23
#define GLIU_P2D_BMK1 0x24
#define GLIU_P2D_BM3 0x25
#define GLIU_P2D_BM4 0x26
#define GLIU_COH 0x80
#define GLIU_PAE 0x81
#define GLIU_ARB 0x82
#define GLIU_ASMI 0x83
#define GLIU_AERR 0x84
#define GLIU_DEBUG 0x85
#define GLIU_PHY_CAP 0x86
#define GLIU_NOUT_RESP 0x87
#define GLIU_NOUT_WDATA 0x88
#define GLIU_WHOAMI 0x8B
#define GLIU_SLV_DIS 0x8C
#define GLIU_IOD_BM0 0xE0
#define GLIU_IOD_BM1 0xE1
#define GLIU_IOD_BM2 0xE2
#define GLIU_IOD_BM3 0xE3
#define GLIU_IOD_BM4 0xE4
#define GLIU_IOD_BM5 0xE5
#define GLIU_IOD_BM6 0xE6
#define GLIU_IOD_BM7 0xE7
#define GLIU_IOD_BM8 0xE8
#define GLIU_IOD_BM9 0xE9
#define GLIU_IOD_SC0 0xEA
#define GLIU_IOD_SC1 0xEB
#define GLIU_IOD_SC2 0xEC
#define GLIU_IOD_SC3 0xED
#define GLIU_IOD_SC4 0xEE
#define GLIU_IOD_SC5 0xEF
#define GLIU_IOD_SC6 0xF0
#define GLIU_IOD_SC7 0xF1
/*
* SB STANDARD
*/
#define SB_CAP 0x00
#define SB_CONFIG 0x01
#define SB_SMI 0x02
#define SB_ERROR 0x03
#define SB_MAR_ERR_EN 0x00000001
#define SB_TAR_ERR_EN 0x00000002
#define SB_RSVD_BIT1 0x00000004
#define SB_EXCEP_ERR_EN 0x00000008
#define SB_SYSE_ERR_EN 0x00000010
#define SB_PARE_ERR_EN 0x00000020
#define SB_TAS_ERR_EN 0x00000040
#define SB_MAR_ERR_FLAG 0x00010000
#define SB_TAR_ERR_FLAG 0x00020000
#define SB_RSVD_BIT2 0x00040000
#define SB_EXCEP_ERR_FLAG 0x00080000
#define SB_SYSE_ERR_FLAG 0x00100000
#define SB_PARE_ERR_FLAG 0x00200000
#define SB_TAS_ERR_FLAG 0x00400000
#define SB_PM 0x04
#define SB_DIAG 0x05
/*
* SB SPEC.
*/
#define SB_CTRL 0x10
#define SB_R0 0x20
#define SB_R1 0x21
#define SB_R2 0x22
#define SB_R3 0x23
#define SB_R4 0x24
#define SB_R5 0x25
#define SB_R6 0x26
#define SB_R7 0x27
#define SB_R8 0x28
#define SB_R9 0x29
#define SB_R10 0x2A
#define SB_R11 0x2B
#define SB_R12 0x2C
#define SB_R13 0x2D
#define SB_R14 0x2E
#define SB_R15 0x2F
/*
* GLCP STANDARD
*/
#define GLCP_CAP 0x00
#define GLCP_CONFIG 0x01
#define GLCP_SMI 0x02
#define GLCP_ERROR 0x03
#define GLCP_PM 0x04
#define GLCP_DIAG 0x05
/*
* GLCP SPEC.
*/
#define GLCP_CLK_DIS_DELAY 0x08
#define GLCP_PM_CLK_DISABLE 0x09
#define GLCP_GLB_PM 0x0B
#define GLCP_DBG_OUT 0x0C
#define GLCP_RSVD1 0x0D
#define GLCP_SOFT_COM 0x0E
#define SOFT_BAR_SMB_FLAG 0x00000001
#define SOFT_BAR_GPIO_FLAG 0x00000002
#define SOFT_BAR_MFGPT_FLAG 0x00000004
#define SOFT_BAR_IRQ_FLAG 0x00000008
#define SOFT_BAR_PMS_FLAG 0x00000010
#define SOFT_BAR_ACPI_FLAG 0x00000020
#define SOFT_BAR_IDE_FLAG 0x00000400
#define SOFT_BAR_ACC_FLAG 0x00000800
#define SOFT_BAR_OHCI_FLAG 0x00001000
#define SOFT_BAR_EHCI_FLAG 0x00002000
#define GLCP_RSVD2 0x0F
#define GLCP_CLK_OFF 0x10
#define GLCP_CLK_ACTIVE 0x11
#define GLCP_CLK_DISABLE 0x12
#define GLCP_CLK4ACK 0x13
#define GLCP_SYS_RST 0x14
#define GLCP_RSVD3 0x15
#define GLCP_DBG_CLK_CTRL 0x16
#define GLCP_CHIP_REV_ID 0x17
/* PIC */
#define PIC_YSEL_LOW 0x20
#define PIC_YSEL_LOW_USB_SHIFT 8
#define PIC_YSEL_LOW_ACC_SHIFT 16
#define PIC_YSEL_LOW_FLASH_SHIFT 24
#define PIC_YSEL_HIGH 0x21
#define PIC_ZSEL_LOW 0x22
#define PIC_ZSEL_HIGH 0x23
#define PIC_IRQM_PRIM 0x24
#define PIC_IRQM_LPC 0x25
#define PIC_XIRR_STS_LOW 0x26
#define PIC_XIRR_STS_HIGH 0x27
#define PCI_SHDW 0x34
/*
* DIVIL STANDARD
*/
#define DIVIL_CAP 0x00
#define DIVIL_CONFIG 0x01
#define DIVIL_SMI 0x02
#define DIVIL_ERROR 0x03
#define DIVIL_PM 0x04
#define DIVIL_DIAG 0x05
/*
* DIVIL SPEC.
*/
#define DIVIL_LBAR_IRQ 0x08
#define DIVIL_LBAR_KEL 0x09
#define DIVIL_LBAR_SMB 0x0B
#define DIVIL_LBAR_GPIO 0x0C
#define DIVIL_LBAR_MFGPT 0x0D
#define DIVIL_LBAR_ACPI 0x0E
#define DIVIL_LBAR_PMS 0x0F
#define DIVIL_LEG_IO 0x14
#define DIVIL_BALL_OPTS 0x15
#define DIVIL_SOFT_IRQ 0x16
#define DIVIL_SOFT_RESET 0x17
/* MFGPT */
#define MFGPT_IRQ 0x28
/*
* IDE STANDARD
*/
#define IDE_CAP 0x00
#define IDE_CONFIG 0x01
#define IDE_SMI 0x02
#define IDE_ERROR 0x03
#define IDE_PM 0x04
#define IDE_DIAG 0x05
/*
* IDE SPEC.
*/
#define IDE_IO_BAR 0x08
#define IDE_CFG 0x10
#define IDE_DTC 0x12
#define IDE_CAST 0x13
#define IDE_ETC 0x14
#define IDE_INTERNAL_PM 0x15
/*
* ACC STANDARD
*/
#define ACC_CAP 0x00
#define ACC_CONFIG 0x01
#define ACC_SMI 0x02
#define ACC_ERROR 0x03
#define ACC_PM 0x04
#define ACC_DIAG 0x05
/*
* USB STANDARD
*/
#define USB_CAP 0x00
#define USB_CONFIG 0x01
#define USB_SMI 0x02
#define USB_ERROR 0x03
#define USB_PM 0x04
#define USB_DIAG 0x05
/*
* USB SPEC.
*/
#define USB_OHCI 0x08
#define USB_EHCI 0x09
/****************** NATIVE ***************************/
/* GPIO : I/O SPACE; REG : 32BITS */
#define GPIOL_OUT_VAL 0x00
#define GPIOL_OUT_EN 0x04
#endif /* _CS5536_H */
/*
* the definition file of cs5536 Virtual Support Module(VSM).
* pci configuration space can be accessed through the VSM, so
* there is no need of the MSR read/write now, except the spec.
* MSR registers which are not implemented yet.
*
* Copyright (C) 2007 Lemote Inc.
* Author : jlliu, liujl@lemote.com
*/
#ifndef _CS5536_PCI_H
#define _CS5536_PCI_H
#include <linux/types.h>
#include <linux/pci_regs.h>
extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
extern u32 cs5536_pci_conf_read4(int function, int reg);
#define CS5536_ACC_INTR 9
#define CS5536_IDE_INTR 14
#define CS5536_USB_INTR 11
#define CS5536_MFGPT_INTR 5
#define CS5536_UART1_INTR 4
#define CS5536_UART2_INTR 3
/************** PCI BUS DEVICE FUNCTION ***************/
/*
* PCI bus device function
*/
#define PCI_BUS_CS5536 0
#define PCI_IDSEL_CS5536 14
/********** STANDARD PCI-2.2 EXPANSION ****************/
/*
* PCI configuration space
* we have to virtualize the PCI configure space head, so we should
* define the necessary IDs and some others.
*/
/* CONFIG of PCI VENDOR ID*/
#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
(((mod_dev_id) << 16) | (sys_vendor_id))
/* VENDOR ID */
#define CS5536_VENDOR_ID 0x1022
/* DEVICE ID */
#define CS5536_ISA_DEVICE_ID 0x2090
#define CS5536_IDE_DEVICE_ID 0x209a
#define CS5536_ACC_DEVICE_ID 0x2093
#define CS5536_OHCI_DEVICE_ID 0x2094
#define CS5536_EHCI_DEVICE_ID 0x2095
/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
#define CS5536_ISA_CLASS_CODE 0x060100
#define CS5536_IDE_CLASS_CODE 0x010180
#define CS5536_ACC_CLASS_CODE 0x040100
#define CS5536_OHCI_CLASS_CODE 0x0C0310
#define CS5536_EHCI_CLASS_CODE 0x0C0320
/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer) \
((PCI_NONE_BIST << 24) | ((header_type) << 16) \
| ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
#define PCI_NONE_BIST 0x00 /* RO not implemented yet. */
#define PCI_BRIDGE_HEADER_TYPE 0x80 /* RO */
#define PCI_NORMAL_HEADER_TYPE 0x00
#define PCI_NORMAL_LATENCY_TIMER 0x00
#define PCI_NORMAL_CACHE_LINE_SIZE 0x08 /* RW */
/* BAR */
#define PCI_BAR0_REG 0x10
#define PCI_BAR1_REG 0x14
#define PCI_BAR2_REG 0x18
#define PCI_BAR3_REG 0x1c
#define PCI_BAR4_REG 0x20
#define PCI_BAR5_REG 0x24
#define PCI_BAR_COUNT 6
#define PCI_BAR_RANGE_MASK 0xFFFFFFFF
/* CARDBUS CIS POINTER */
#define PCI_CARDBUS_CIS_POINTER 0x00000000
/* SUBSYSTEM VENDOR ID */
#define CS5536_SUB_VENDOR_ID CS5536_VENDOR_ID
/* SUBSYSTEM ID */
#define CS5536_ISA_SUB_ID CS5536_ISA_DEVICE_ID
#define CS5536_IDE_SUB_ID CS5536_IDE_DEVICE_ID
#define CS5536_ACC_SUB_ID CS5536_ACC_DEVICE_ID
#define CS5536_OHCI_SUB_ID CS5536_OHCI_DEVICE_ID
#define CS5536_EHCI_SUB_ID CS5536_EHCI_DEVICE_ID
/* EXPANSION ROM BAR */
#define PCI_EXPANSION_ROM_BAR 0x00000000
/* CAPABILITIES POINTER */
#define PCI_CAPLIST_POINTER 0x00000000
#define PCI_CAPLIST_USB_POINTER 0x40
/* INTERRUPT */
#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
((pin) << 8) | (mod_intr))
#define PCI_MAX_LATENCY 0x40
#define PCI_MIN_GRANT 0x00
#define PCI_DEFAULT_PIN 0x01
/*********** EXPANSION PCI REG ************************/
/*
* ISA EXPANSION
*/
#define PCI_UART1_INT_REG 0x50
#define PCI_UART2_INT_REG 0x54
#define PCI_ISA_FIXUP_REG 0x58
/*
* IDE EXPANSION
*/
#define PCI_IDE_CFG_REG 0x40
#define CS5536_IDE_FLASH_SIGNATURE 0xDEADBEEF
#define PCI_IDE_DTC_REG 0x48
#define PCI_IDE_CAST_REG 0x4C
#define PCI_IDE_ETC_REG 0x50
#define PCI_IDE_PM_REG 0x54
#define PCI_IDE_INT_REG 0x60
/*
* ACC EXPANSION
*/
#define PCI_ACC_INT_REG 0x50
/*
* OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
*/
#define PCI_OHCI_PM_REG 0x40
#define PCI_OHCI_INT_REG 0x50
/*
* EHCI EXPANSION
*/
#define PCI_EHCI_LEGSMIEN_REG 0x50
#define PCI_EHCI_LEGSMISTS_REG 0x54
#define PCI_EHCI_FLADJ_REG 0x60
#endif /* _CS5536_PCI_H_ */
/*
* the read/write interfaces for Virtual Support Module(VSM)
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin <wuzj@lemote.com>
*/
#ifndef _CS5536_VSM_H
#define _CS5536_VSM_H
#include <linux/types.h>
typedef void (*cs5536_pci_vsm_write)(int reg, u32 value);
typedef u32 (*cs5536_pci_vsm_read)(int reg);
#define DECLARE_CS5536_MODULE(name) \
extern void pci_##name##_write_reg(int reg, u32 value); \
extern u32 pci_##name##_read_reg(int reg);
/* ide module */
DECLARE_CS5536_MODULE(ide)
/* acc module */
DECLARE_CS5536_MODULE(acc)
/* ohci module */
DECLARE_CS5536_MODULE(ohci)
/* isa module */
DECLARE_CS5536_MODULE(isa)
/* ehci module */
DECLARE_CS5536_MODULE(ehci)
#endif /* _CS5536_VSM_H */
......@@ -58,3 +58,6 @@ config LEMOTE_MACH2F
These family machines include fuloong2f mini PC, yeeloong2f notebook,
LingLoong allinone PC and so forth.
endchoice
config CS5536
bool
......@@ -10,3 +10,9 @@ obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SERIAL_8250) += serial.o
#
# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
# space
#
obj-$(CONFIG_CS5536) += cs5536/
#
# Makefile for CS5536 support.
#
obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
cs5536_isa.o cs5536_ehci.o
EXTRA_CFLAGS += -Werror
/*
* the ACC Virtual Support Module of AMD CS5536
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <cs5536/cs5536.h>
#include <cs5536/cs5536_pci.h>
void pci_acc_write_reg(int reg, u32 value)
{
u32 hi = 0, lo = value;
switch (reg) {
case PCI_COMMAND:
_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
if (value & PCI_COMMAND_MASTER)
lo |= (0x03 << 8);
else
lo &= ~(0x03 << 8);
_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
break;
case PCI_STATUS:
if (value & PCI_STATUS_PARITY) {
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG) {
lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
}
}
break;
case PCI_BAR0_REG:
if (value == PCI_BAR_RANGE_MASK) {
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
lo |= SOFT_BAR_ACC_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if (value & 0x01) {
value &= 0xfffffffc;
hi = 0xA0000000 | ((value & 0x000ff000) >> 12);
lo = 0x000fff80 | ((value & 0x00000fff) << 20);
_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo);
}
break;
case PCI_ACC_INT_REG:
_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
/* disable all the usb interrupt in PIC */
lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT);
if (value) /* enable all the acc interrupt in PIC */
lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT);
_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
break;
default:
break;
}
}
u32 pci_acc_read_reg(int reg)
{
u32 hi, lo;
u32 conf_data = 0;
switch (reg) {
case PCI_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID);
break;
case PCI_COMMAND:
_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
if (((lo & 0xfff00000) || (hi & 0x000000ff))
&& ((hi & 0xf0000000) == 0xa0000000))
conf_data |= PCI_COMMAND_IO;
_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
if ((lo & 0x300) == 0x300)
conf_data |= PCI_COMMAND_MASTER;
break;
case PCI_STATUS:
conf_data |= PCI_STATUS_66MHZ;
conf_data |= PCI_STATUS_FAST_BACK;
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG)
conf_data |= PCI_STATUS_PARITY;
conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
break;
case PCI_CLASS_REVISION:
_rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo);
conf_data = lo & 0x000000ff;
conf_data |= (CS5536_ACC_CLASS_CODE << 8);
break;
case PCI_CACHE_LINE_SIZE:
conf_data =
CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
PCI_NORMAL_LATENCY_TIMER);
break;
case PCI_BAR0_REG:
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
if (lo & SOFT_BAR_ACC_FLAG) {
conf_data = CS5536_ACC_RANGE |
PCI_BASE_ADDRESS_SPACE_IO;
lo &= ~SOFT_BAR_ACC_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else {
_rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo);
conf_data = (hi & 0x000000ff) << 12;
conf_data |= (lo & 0xfff00000) >> 20;
conf_data |= 0x01;
conf_data &= ~0x02;
}
break;
case PCI_CARDBUS_CIS:
conf_data = PCI_CARDBUS_CIS_POINTER;
break;
case PCI_SUBSYSTEM_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID);
break;
case PCI_ROM_ADDRESS:
conf_data = PCI_EXPANSION_ROM_BAR;
break;
case PCI_CAPABILITY_LIST:
conf_data = PCI_CAPLIST_USB_POINTER;
break;
case PCI_INTERRUPT_LINE:
conf_data =
CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR);
break;
default:
break;
}
return conf_data;
}
/*
* the EHCI Virtual Support Module of AMD CS5536
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <cs5536/cs5536.h>
#include <cs5536/cs5536_pci.h>
void pci_ehci_write_reg(int reg, u32 value)
{
u32 hi = 0, lo = value;
switch (reg) {
case PCI_COMMAND:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
if (value & PCI_COMMAND_MASTER)
hi |= PCI_COMMAND_MASTER;
else
hi &= ~PCI_COMMAND_MASTER;
if (value & PCI_COMMAND_MEMORY)
hi |= PCI_COMMAND_MEMORY;
else
hi &= ~PCI_COMMAND_MEMORY;
_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
break;
case PCI_STATUS:
if (value & PCI_STATUS_PARITY) {
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG) {
lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
}
}
break;
case PCI_BAR0_REG:
if (value == PCI_BAR_RANGE_MASK) {
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
lo |= SOFT_BAR_EHCI_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if ((value & 0x01) == 0x00) {
_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
value &= 0xfffffff0;
hi = 0x40000000 | ((value & 0xff000000) >> 24);
lo = 0x000fffff | ((value & 0x00fff000) << 8);
_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo);
}
break;
case PCI_EHCI_LEGSMIEN_REG:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
hi &= 0x003f0000;
hi |= (value & 0x3f) << 16;
_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
break;
case PCI_EHCI_FLADJ_REG:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
hi &= ~0x00003f00;
hi |= value & 0x00003f00;
_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
break;
default:
break;
}
}
u32 pci_ehci_read_reg(int reg)
{
u32 conf_data = 0;
u32 hi, lo;
switch (reg) {
case PCI_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID);
break;
case PCI_COMMAND:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
if (hi & PCI_COMMAND_MASTER)
conf_data |= PCI_COMMAND_MASTER;
if (hi & PCI_COMMAND_MEMORY)
conf_data |= PCI_COMMAND_MEMORY;
break;
case PCI_STATUS:
conf_data |= PCI_STATUS_66MHZ;
conf_data |= PCI_STATUS_FAST_BACK;
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG)
conf_data |= PCI_STATUS_PARITY;
conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
break;
case PCI_CLASS_REVISION:
_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
conf_data = lo & 0x000000ff;
conf_data |= (CS5536_EHCI_CLASS_CODE << 8);
break;
case PCI_CACHE_LINE_SIZE:
conf_data =
CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
PCI_NORMAL_LATENCY_TIMER);
break;
case PCI_BAR0_REG:
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
if (lo & SOFT_BAR_EHCI_FLAG) {
conf_data = CS5536_EHCI_RANGE |
PCI_BASE_ADDRESS_SPACE_MEMORY;
lo &= ~SOFT_BAR_EHCI_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else {
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
conf_data = lo & 0xfffff000;
}
break;
case PCI_CARDBUS_CIS:
conf_data = PCI_CARDBUS_CIS_POINTER;
break;
case PCI_SUBSYSTEM_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
break;
case PCI_ROM_ADDRESS:
conf_data = PCI_EXPANSION_ROM_BAR;
break;
case PCI_CAPABILITY_LIST:
conf_data = PCI_CAPLIST_USB_POINTER;
break;
case PCI_INTERRUPT_LINE:
conf_data =
CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
break;
case PCI_EHCI_LEGSMIEN_REG:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
conf_data = (hi & 0x003f0000) >> 16;
break;
case PCI_EHCI_LEGSMISTS_REG:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
conf_data = (hi & 0x3f000000) >> 24;
break;
case PCI_EHCI_FLADJ_REG:
_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
conf_data = hi & 0x00003f00;
break;
default:
break;
}
return conf_data;
}
/*
* the IDE Virtual Support Module of AMD CS5536
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <cs5536/cs5536.h>
#include <cs5536/cs5536_pci.h>
void pci_ide_write_reg(int reg, u32 value)
{
u32 hi = 0, lo = value;
switch (reg) {
case PCI_COMMAND:
_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
if (value & PCI_COMMAND_MASTER)
lo |= (0x03 << 4);
else
lo &= ~(0x03 << 4);
_wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo);
break;
case PCI_STATUS:
if (value & PCI_STATUS_PARITY) {
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG) {
lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
}
}
break;
case PCI_CACHE_LINE_SIZE:
value &= 0x0000ff00;
_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
hi &= 0xffffff00;
hi |= (value >> 8);
_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
break;
case PCI_BAR4_REG:
if (value == PCI_BAR_RANGE_MASK) {
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
lo |= SOFT_BAR_IDE_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if (value & 0x01) {
lo = (value & 0xfffffff0) | 0x1;
_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
value &= 0xfffffffc;
hi = 0x60000000 | ((value & 0x000ff000) >> 12);
lo = 0x000ffff0 | ((value & 0x00000fff) << 20);
_wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo);
}
break;
case PCI_IDE_CFG_REG:
if (value == CS5536_IDE_FLASH_SIGNATURE) {
_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
lo |= 0x01;
_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
} else
_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
break;
case PCI_IDE_DTC_REG:
_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
break;
case PCI_IDE_CAST_REG:
_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
break;
case PCI_IDE_ETC_REG:
_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
break;
case PCI_IDE_PM_REG:
_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
break;
default:
break;
}
}
u32 pci_ide_read_reg(int reg)
{
u32 conf_data = 0;
u32 hi, lo;
switch (reg) {
case PCI_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID);
break;
case PCI_COMMAND:
_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
if (lo & 0xfffffff0)
conf_data |= PCI_COMMAND_IO;
_rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo);
if ((lo & 0x30) == 0x30)
conf_data |= PCI_COMMAND_MASTER;
break;
case PCI_STATUS:
conf_data |= PCI_STATUS_66MHZ;
conf_data |= PCI_STATUS_FAST_BACK;
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG)
conf_data |= PCI_STATUS_PARITY;
conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
break;
case PCI_CLASS_REVISION:
_rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo);
conf_data = lo & 0x000000ff;
conf_data |= (CS5536_IDE_CLASS_CODE << 8);
break;
case PCI_CACHE_LINE_SIZE:
_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
hi &= 0x000000f8;
conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi);
break;
case PCI_BAR4_REG:
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
if (lo & SOFT_BAR_IDE_FLAG) {
conf_data = CS5536_IDE_RANGE |
PCI_BASE_ADDRESS_SPACE_IO;
lo &= ~SOFT_BAR_IDE_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else {
_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
conf_data = lo & 0xfffffff0;
conf_data |= 0x01;
conf_data &= ~0x02;
}
break;
case PCI_CARDBUS_CIS:
conf_data = PCI_CARDBUS_CIS_POINTER;
break;
case PCI_SUBSYSTEM_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID);
break;
case PCI_ROM_ADDRESS:
conf_data = PCI_EXPANSION_ROM_BAR;
break;
case PCI_CAPABILITY_LIST:
conf_data = PCI_CAPLIST_POINTER;
break;
case PCI_INTERRUPT_LINE:
conf_data =
CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR);
break;
case PCI_IDE_CFG_REG:
_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
conf_data = lo;
break;
case PCI_IDE_DTC_REG:
_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
conf_data = lo;
break;
case PCI_IDE_CAST_REG:
_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
conf_data = lo;
break;
case PCI_IDE_ETC_REG:
_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
conf_data = lo;
case PCI_IDE_PM_REG:
_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
conf_data = lo;
break;
default:
break;
}
return conf_data;
}
/*
* the ISA Virtual Support Module of AMD CS5536
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <cs5536/cs5536.h>
#include <cs5536/cs5536_pci.h>
/* common variables for PCI_ISA_READ/WRITE_BAR */
static const u32 divil_msr_reg[6] = {
DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
};
static const u32 soft_bar_flag[6] = {
SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
};
static const u32 sb_msr_reg[6] = {
SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
};
static const u32 bar_space_range[6] = {
CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
};
static const int bar_space_len[6] = {
CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
};
/*
* enable the divil module bar space.
*
* For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
* and the RCONFx(0~5) reg to use the modules.
*/
static void divil_lbar_enable(void)
{
u32 hi, lo;
int offset;
/*
* The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
*/
for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
hi |= 0x01;
_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
}
}
/*
* disable the divil module bar space.
*/
static void divil_lbar_disable(void)
{
u32 hi, lo;
int offset;
for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
hi &= ~0x01;
_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
}
}
/*
* BAR write: write value to the n BAR
*/
void pci_isa_write_bar(int n, u32 value)
{
u32 hi = 0, lo = value;
if (value == PCI_BAR_RANGE_MASK) {
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
lo |= soft_bar_flag[n];
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if (value & 0x01) {
/* NATIVE reg */
hi = 0x0000f001;
lo &= bar_space_range[n];
_wrmsr(divil_msr_reg[n], hi, lo);
/* RCONFx is 4bytes in units for I/O space */
hi = ((value & 0x000ffffc) << 12) |
((bar_space_len[n] - 4) << 12) | 0x01;
lo = ((value & 0x000ffffc) << 12) | 0x01;
_wrmsr(sb_msr_reg[n], hi, lo);
}
}
/*
* BAR read: read the n BAR
*/
u32 pci_isa_read_bar(int n)
{
u32 conf_data = 0;
u32 hi, lo;
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
if (lo & soft_bar_flag[n]) {
conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
lo &= ~soft_bar_flag[n];
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else {
_rdmsr(divil_msr_reg[n], &hi, &lo);
conf_data = lo & bar_space_range[n];
conf_data |= 0x01;
conf_data &= ~0x02;
}
return conf_data;
}
/*
* isa_write: ISA write transfer
*
* We assume that this is not a bus master transfer.
*/
void pci_isa_write_reg(int reg, u32 value)
{
u32 hi = 0, lo = value;
u32 temp;
switch (reg) {
case PCI_COMMAND:
if (value & PCI_COMMAND_IO)
divil_lbar_enable();
else
divil_lbar_disable();
break;
case PCI_STATUS:
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
temp = lo & 0x0000ffff;
if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
(lo & SB_TAS_ERR_EN))
temp |= SB_TAS_ERR_FLAG;
if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
(lo & SB_TAR_ERR_EN))
temp |= SB_TAR_ERR_FLAG;
if ((value & PCI_STATUS_REC_MASTER_ABORT)
&& (lo & SB_MAR_ERR_EN))
temp |= SB_MAR_ERR_FLAG;
if ((value & PCI_STATUS_DETECTED_PARITY)
&& (lo & SB_PARE_ERR_EN))
temp |= SB_PARE_ERR_FLAG;
lo = temp;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
break;
case PCI_CACHE_LINE_SIZE:
value &= 0x0000ff00;
_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
hi &= 0xffffff00;
hi |= (value >> 8);
_wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
break;
case PCI_BAR0_REG:
pci_isa_write_bar(0, value);
break;
case PCI_BAR1_REG:
pci_isa_write_bar(1, value);
break;
case PCI_BAR2_REG:
pci_isa_write_bar(2, value);
break;
case PCI_BAR3_REG:
pci_isa_write_bar(3, value);
break;
case PCI_BAR4_REG:
pci_isa_write_bar(4, value);
break;
case PCI_BAR5_REG:
pci_isa_write_bar(5, value);
break;
case PCI_UART1_INT_REG:
_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
/* disable uart1 interrupt in PIC */
lo &= ~(0xf << 24);
if (value) /* enable uart1 interrupt in PIC */
lo |= (CS5536_UART1_INTR << 24);
_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
break;
case PCI_UART2_INT_REG:
_rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
/* disable uart2 interrupt in PIC */
lo &= ~(0xf << 28);
if (value) /* enable uart2 interrupt in PIC */
lo |= (CS5536_UART2_INTR << 28);
_wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
break;
case PCI_ISA_FIXUP_REG:
if (value) {
/* enable the TARGET ABORT/MASTER ABORT etc. */
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
lo |= 0x00000063;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
}
default:
/* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
break;
}
}
/*
* isa_read: ISA read transfers
*
* We assume that this is not a bus master transfer.
*/
u32 pci_isa_read_reg(int reg)
{
u32 conf_data = 0;
u32 hi, lo;
switch (reg) {
case PCI_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
break;
case PCI_COMMAND:
/* we just check the first LBAR for the IO enable bit, */
/* maybe we should changed later. */
_rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
if (hi & 0x01)
conf_data |= PCI_COMMAND_IO;
break;
case PCI_STATUS:
conf_data |= PCI_STATUS_66MHZ;
conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
conf_data |= PCI_STATUS_FAST_BACK;
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_TAS_ERR_FLAG)
conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
if (lo & SB_TAR_ERR_FLAG)
conf_data |= PCI_STATUS_REC_TARGET_ABORT;
if (lo & SB_MAR_ERR_FLAG)
conf_data |= PCI_STATUS_REC_MASTER_ABORT;
if (lo & SB_PARE_ERR_FLAG)
conf_data |= PCI_STATUS_DETECTED_PARITY;
break;
case PCI_CLASS_REVISION:
_rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
conf_data = lo & 0x000000ff;
conf_data |= (CS5536_ISA_CLASS_CODE << 8);
break;
case PCI_CACHE_LINE_SIZE:
_rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
hi &= 0x000000f8;
conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
break;
/*
* we only use the LBAR of DIVIL, no RCONF used.
* all of them are IO space.
*/
case PCI_BAR0_REG:
return pci_isa_read_bar(0);
break;
case PCI_BAR1_REG:
return pci_isa_read_bar(1);
break;
case PCI_BAR2_REG:
return pci_isa_read_bar(2);
break;
case PCI_BAR3_REG:
break;
case PCI_BAR4_REG:
return pci_isa_read_bar(4);
break;
case PCI_BAR5_REG:
return pci_isa_read_bar(5);
break;
case PCI_CARDBUS_CIS:
conf_data = PCI_CARDBUS_CIS_POINTER;
break;
case PCI_SUBSYSTEM_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
break;
case PCI_ROM_ADDRESS:
conf_data = PCI_EXPANSION_ROM_BAR;
break;
case PCI_CAPABILITY_LIST:
conf_data = PCI_CAPLIST_POINTER;
break;
case PCI_INTERRUPT_LINE:
/* no interrupt used here */
conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
break;
default:
break;
}
return conf_data;
}
/*
* the OHCI Virtual Support Module of AMD CS5536
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <cs5536/cs5536.h>
#include <cs5536/cs5536_pci.h>
void pci_ohci_write_reg(int reg, u32 value)
{
u32 hi = 0, lo = value;
switch (reg) {
case PCI_COMMAND:
_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
if (value & PCI_COMMAND_MASTER)
hi |= PCI_COMMAND_MASTER;
else
hi &= ~PCI_COMMAND_MASTER;
if (value & PCI_COMMAND_MEMORY)
hi |= PCI_COMMAND_MEMORY;
else
hi &= ~PCI_COMMAND_MEMORY;
_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
break;
case PCI_STATUS:
if (value & PCI_STATUS_PARITY) {
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG) {
lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG;
_wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
}
}
break;
case PCI_BAR0_REG:
if (value == PCI_BAR_RANGE_MASK) {
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
lo |= SOFT_BAR_OHCI_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else if ((value & 0x01) == 0x00) {
_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
value &= 0xfffffff0;
hi = 0x40000000 | ((value & 0xff000000) >> 24);
lo = 0x000fffff | ((value & 0x00fff000) << 8);
_wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo);
}
break;
case PCI_OHCI_INT_REG:
_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT);
if (value) /* enable all the usb interrupt in PIC */
lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT);
_wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo);
break;
default:
break;
}
}
u32 pci_ohci_read_reg(int reg)
{
u32 conf_data = 0;
u32 hi, lo;
switch (reg) {
case PCI_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID);
break;
case PCI_COMMAND:
_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
if (hi & PCI_COMMAND_MASTER)
conf_data |= PCI_COMMAND_MASTER;
if (hi & PCI_COMMAND_MEMORY)
conf_data |= PCI_COMMAND_MEMORY;
break;
case PCI_STATUS:
conf_data |= PCI_STATUS_66MHZ;
conf_data |= PCI_STATUS_FAST_BACK;
_rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
if (lo & SB_PARE_ERR_FLAG)
conf_data |= PCI_STATUS_PARITY;
conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
break;
case PCI_CLASS_REVISION:
_rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo);
conf_data = lo & 0x000000ff;
conf_data |= (CS5536_OHCI_CLASS_CODE << 8);
break;
case PCI_CACHE_LINE_SIZE:
conf_data =
CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE,
PCI_NORMAL_LATENCY_TIMER);
break;
case PCI_BAR0_REG:
_rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
if (lo & SOFT_BAR_OHCI_FLAG) {
conf_data = CS5536_OHCI_RANGE |
PCI_BASE_ADDRESS_SPACE_MEMORY;
lo &= ~SOFT_BAR_OHCI_FLAG;
_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
} else {
_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
conf_data = lo & 0xffffff00;
conf_data &= ~0x0000000f; /* 32bit mem */
}
break;
case PCI_CARDBUS_CIS:
conf_data = PCI_CARDBUS_CIS_POINTER;
break;
case PCI_SUBSYSTEM_VENDOR_ID:
conf_data =
CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID);
break;
case PCI_ROM_ADDRESS:
conf_data = PCI_EXPANSION_ROM_BAR;
break;
case PCI_CAPABILITY_LIST:
conf_data = PCI_CAPLIST_USB_POINTER;
break;
case PCI_INTERRUPT_LINE:
conf_data =
CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR);
break;
case PCI_OHCI_INT_REG:
_rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo);
if ((lo & 0x00000f00) == CS5536_USB_INTR)
conf_data = 1;
break;
default:
break;
}
return conf_data;
}
/*
* read/write operation to the PCI config space of CS5536
*
* Copyright (C) 2007 Lemote, Inc.
* Author : jlliu, liujl@lemote.com
*
* Copyright (C) 2009 Lemote, Inc.
* Author: Wu Zhangjin, wuzj@lemote.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* the Virtual Support Module(VSM) for virtulizing the PCI
* configure space are defined in cs5536_modulename.c respectively,
*
* after this virtulizing, user can access the PCI configure space
* directly as a normal multi-function PCI device which follows
* the PCI-2.2 spec.
*/
#include <linux/types.h>
#include <cs5536/cs5536_vsm.h>
enum {
CS5536_FUNC_START = -1,
CS5536_ISA_FUNC,
reserved_func,
CS5536_IDE_FUNC,
CS5536_ACC_FUNC,
CS5536_OHCI_FUNC,
CS5536_EHCI_FUNC,
CS5536_FUNC_END,
};
static const cs5536_pci_vsm_write vsm_conf_write[] = {
[CS5536_ISA_FUNC] pci_isa_write_reg,
[reserved_func] NULL,
[CS5536_IDE_FUNC] pci_ide_write_reg,
[CS5536_ACC_FUNC] pci_acc_write_reg,
[CS5536_OHCI_FUNC] pci_ohci_write_reg,
[CS5536_EHCI_FUNC] pci_ehci_write_reg,
};
static const cs5536_pci_vsm_read vsm_conf_read[] = {
[CS5536_ISA_FUNC] pci_isa_read_reg,
[reserved_func] NULL,
[CS5536_IDE_FUNC] pci_ide_read_reg,
[CS5536_ACC_FUNC] pci_acc_read_reg,
[CS5536_OHCI_FUNC] pci_ohci_read_reg,
[CS5536_EHCI_FUNC] pci_ehci_read_reg,
};
/*
* write to PCI config space and transfer it to MSR write.
*/
void cs5536_pci_conf_write4(int function, int reg, u32 value)
{
if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
return;
if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0))
return;
if (vsm_conf_write[function] != NULL)
vsm_conf_write[function](reg, value);
}
/*
* read PCI config space and transfer it to MSR access.
*/
u32 cs5536_pci_conf_read4(int function, int reg)
{
u32 data = 0;
if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END))
return 0;
if ((reg < 0) || ((reg & 0x03) != 0))
return 0;
if (reg > 0x100)
return 0xffffffff;
if (vsm_conf_read[function] != NULL)
data = vsm_conf_read[function](reg);
return data;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册