提交 22b8bf17 编写于 作者: P Paulo Zanoni 提交者: Daniel Vetter

drm/i915: use HAS_DDI on intel_hdmi.c and intel_display.c

Since basically every code called on these places comes from
intel_ddi.c
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 9ed9809f
......@@ -332,7 +332,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
uint32_t status;
bool done;
if (IS_HASWELL(dev)) {
if (HAS_DDI(dev)) {
switch (intel_dig_port->port) {
case PORT_A:
ch_ctl = DPA_AUX_CH_CTL;
......@@ -387,7 +387,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
*/
pm_qos_update_request(&dev_priv->pm_qos, 0);
if (IS_HASWELL(dev)) {
if (HAS_DDI(dev)) {
switch (intel_dig_port->port) {
case PORT_A:
ch_ctl = DPA_AUX_CH_CTL;
......@@ -842,7 +842,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
intel_link_compute_m_n(intel_crtc->bpp, lane_count,
mode->clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
if (HAS_DDI(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
TU_SIZE(m_n.tu) | m_n.gmch_m);
I915_WRITE(PIPE_DATA_N1(cpu_transcoder), m_n.gmch_n);
......@@ -1537,7 +1537,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
if (IS_HASWELL(dev)) {
if (HAS_DDI(dev)) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_400:
return DP_TRAIN_PRE_EMPHASIS_9_5;
......@@ -1745,7 +1745,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
uint32_t signal_levels, mask;
uint8_t train_set = intel_dp->train_set[0];
if (IS_HASWELL(dev)) {
if (HAS_DDI(dev)) {
signal_levels = intel_hsw_signal_levels(train_set);
mask = DDI_BUF_EMP_MASK;
} else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
......@@ -1776,7 +1776,7 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
int ret;
uint32_t temp;
if (IS_HASWELL(dev)) {
if (HAS_DDI(dev)) {
temp = I915_READ(DP_TP_CTL(port));
if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
......
......@@ -1044,7 +1044,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
} else if (IS_VALLEYVIEW(dev)) {
intel_hdmi->write_infoframe = vlv_write_infoframe;
intel_hdmi->set_infoframes = vlv_set_infoframes;
} else if (IS_HASWELL(dev)) {
} else if (HAS_DDI(dev)) {
intel_hdmi->write_infoframe = hsw_write_infoframe;
intel_hdmi->set_infoframes = hsw_set_infoframes;
} else if (HAS_PCH_IBX(dev)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册