提交 22ae7cff 编写于 作者: R Richard Alpe 提交者: David S. Miller

tipc: nl compat add noop and remove legacy nl framework

Add TIPC_CMD_NOOP to compat layer and remove the old framework.

All legacy nl commands are now converted to the compat layer in
netlink_compat.c.
Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 5a81a637
......@@ -4,7 +4,7 @@
obj-$(CONFIG_TIPC) := tipc.o
tipc-y += addr.o bcast.o bearer.o config.o \
tipc-y += addr.o bcast.o bearer.o \
core.o link.o discover.o msg.o \
name_distr.o subscr.o name_table.o net.o \
netlink.o netlink_compat.o node.o socket.o log.o eth_media.o \
......
......@@ -36,7 +36,6 @@
#include <net/sock.h>
#include "core.h"
#include "config.h"
#include "bearer.h"
#include "link.h"
#include "discover.h"
......
/*
* net/tipc/config.c: TIPC configuration management code
*
* Copyright (c) 2002-2006, Ericsson AB
* Copyright (c) 2004-2007, 2010-2013, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "core.h"
#include "socket.h"
#include "name_table.h"
#include "config.h"
#include "server.h"
#define REPLY_TRUNCATED "<truncated>\n"
static const void *req_tlv_area; /* request message TLV area */
static int req_tlv_space; /* request message TLV area size */
static int rep_headroom; /* reply message headroom to use */
struct sk_buff *tipc_cfg_reply_alloc(int payload_size)
{
struct sk_buff *buf;
buf = alloc_skb(rep_headroom + payload_size, GFP_ATOMIC);
if (buf)
skb_reserve(buf, rep_headroom);
return buf;
}
int tipc_cfg_append_tlv(struct sk_buff *buf, int tlv_type,
void *tlv_data, int tlv_data_size)
{
struct tlv_desc *tlv = (struct tlv_desc *)skb_tail_pointer(buf);
int new_tlv_space = TLV_SPACE(tlv_data_size);
if (skb_tailroom(buf) < new_tlv_space)
return 0;
skb_put(buf, new_tlv_space);
tlv->tlv_type = htons(tlv_type);
tlv->tlv_len = htons(TLV_LENGTH(tlv_data_size));
if (tlv_data_size && tlv_data)
memcpy(TLV_DATA(tlv), tlv_data, tlv_data_size);
return 1;
}
struct sk_buff *tipc_cfg_reply_string_type(u16 tlv_type, char *string)
{
struct sk_buff *buf;
int string_len = strlen(string) + 1;
buf = tipc_cfg_reply_alloc(TLV_SPACE(string_len));
if (buf)
tipc_cfg_append_tlv(buf, tlv_type, string, string_len);
return buf;
}
struct sk_buff *tipc_cfg_do_cmd(struct net *net, u32 orig_node, u16 cmd,
const void *request_area, int request_space,
int reply_headroom)
{
struct sk_buff *rep_tlv_buf;
rtnl_lock();
/* Save request and reply details in a well-known location */
req_tlv_area = request_area;
req_tlv_space = request_space;
rep_headroom = reply_headroom;
/* Check command authorization */
if (likely(in_own_node(net, orig_node))) {
/* command is permitted */
} else {
rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
" (cannot be done remotely)");
goto exit;
}
/* Call appropriate processing routine */
switch (cmd) {
case TIPC_CMD_NOOP:
rep_tlv_buf = tipc_cfg_reply_none();
break;
case TIPC_CMD_NOT_NET_ADMIN:
rep_tlv_buf =
tipc_cfg_reply_error_string(TIPC_CFG_NOT_NET_ADMIN);
break;
case TIPC_CMD_SET_MAX_ZONES:
case TIPC_CMD_GET_MAX_ZONES:
case TIPC_CMD_SET_MAX_SLAVES:
case TIPC_CMD_GET_MAX_SLAVES:
case TIPC_CMD_SET_MAX_CLUSTERS:
case TIPC_CMD_GET_MAX_CLUSTERS:
case TIPC_CMD_SET_MAX_NODES:
case TIPC_CMD_GET_MAX_NODES:
case TIPC_CMD_SET_MAX_SUBSCR:
case TIPC_CMD_GET_MAX_SUBSCR:
case TIPC_CMD_SET_MAX_PUBL:
case TIPC_CMD_GET_MAX_PUBL:
case TIPC_CMD_SET_LOG_SIZE:
case TIPC_CMD_SET_REMOTE_MNG:
case TIPC_CMD_GET_REMOTE_MNG:
case TIPC_CMD_DUMP_LOG:
case TIPC_CMD_SET_MAX_PORTS:
case TIPC_CMD_GET_MAX_PORTS:
rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
" (obsolete command)");
break;
default:
rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
" (unknown command)");
break;
}
WARN_ON(rep_tlv_buf->len > TLV_SPACE(ULTRA_STRING_MAX_LEN));
/* Append an error message if we cannot return all requested data */
if (rep_tlv_buf->len == TLV_SPACE(ULTRA_STRING_MAX_LEN)) {
if (*(rep_tlv_buf->data + ULTRA_STRING_MAX_LEN) != '\0')
sprintf(rep_tlv_buf->data + rep_tlv_buf->len -
sizeof(REPLY_TRUNCATED) - 1, REPLY_TRUNCATED);
}
/* Return reply buffer */
exit:
rtnl_unlock();
return rep_tlv_buf;
}
/*
* net/tipc/config.h: Include file for TIPC configuration service code
*
* Copyright (c) 2003-2006, Ericsson AB
* Copyright (c) 2005, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_CONFIG_H
#define _TIPC_CONFIG_H
#include "link.h"
#define ULTRA_STRING_MAX_LEN 32768
struct sk_buff *tipc_cfg_reply_alloc(int payload_size);
int tipc_cfg_append_tlv(struct sk_buff *buf, int tlv_type,
void *tlv_data, int tlv_data_size);
struct sk_buff *tipc_cfg_reply_string_type(u16 tlv_type, char *string);
static inline struct sk_buff *tipc_cfg_reply_none(void)
{
return tipc_cfg_reply_alloc(0);
}
static inline struct sk_buff *tipc_cfg_reply_error_string(char *string)
{
return tipc_cfg_reply_string_type(TIPC_TLV_ERROR_STRING, string);
}
static inline struct sk_buff *tipc_cfg_reply_ultra_string(char *string)
{
return tipc_cfg_reply_string_type(TIPC_TLV_ULTRA_STRING, string);
}
struct sk_buff *tipc_cfg_do_cmd(struct net *net, u32 orig_node, u16 cmd,
const void *req_tlv_area, int req_tlv_space,
int headroom);
#endif
......@@ -39,7 +39,8 @@
#include "core.h"
#include "name_table.h"
#include "subscr.h"
#include "config.h"
#include "bearer.h"
#include "net.h"
#include "socket.h"
#include <linux/module.h>
......
......@@ -40,7 +40,6 @@
#include "socket.h"
#include "name_distr.h"
#include "discover.h"
#include "config.h"
#include "netlink.h"
#include <linux/pkt_sched.h>
......
......@@ -35,7 +35,6 @@
*/
#include "core.h"
#include "config.h"
/**
* tipc_snprintf - append formatted output to print buffer
......
......@@ -36,11 +36,13 @@
#include <net/sock.h>
#include "core.h"
#include "config.h"
#include "netlink.h"
#include "name_table.h"
#include "name_distr.h"
#include "subscr.h"
#include "bcast.h"
#include "addr.h"
#include <net/genetlink.h>
#define TIPC_NAMETBL_SIZE 1024 /* must be a power of 2 */
......
......@@ -40,8 +40,6 @@
#include "subscr.h"
#include "socket.h"
#include "node.h"
#include "config.h"
#include "bcast.h"
static const struct nla_policy tipc_nl_net_policy[TIPC_NLA_NET_MAX + 1] = {
[TIPC_NLA_NET_UNSPEC] = { .type = NLA_UNSPEC },
......
......@@ -32,7 +32,6 @@
*/
#include "core.h"
#include "config.h"
#include "bearer.h"
#include "link.h"
#include "name_table.h"
......@@ -909,6 +908,11 @@ static int tipc_nl_compat_handle(struct tipc_nl_compat_msg *msg)
memset(&doit, 0, sizeof(doit));
switch (msg->cmd) {
case TIPC_CMD_NOOP:
msg->rep = tipc_tlv_alloc(0);
if (!msg->rep)
return -ENOMEM;
return 0;
case TIPC_CMD_GET_BEARER_NAMES:
msg->rep_size = MAX_BEARERS * TLV_SPACE(TIPC_MAX_BEARER_NAME);
dump.dumpit = tipc_nl_bearer_dump;
......@@ -1044,71 +1048,6 @@ static int tipc_nl_compat_recv(struct sk_buff *skb, struct genl_info *info)
return err;
}
static int handle_cmd(struct sk_buff *skb, struct genl_info *info)
{
struct net *net = genl_info_net(info);
struct sk_buff *rep_buf;
struct nlmsghdr *rep_nlh;
struct nlmsghdr *req_nlh = info->nlhdr;
struct tipc_genlmsghdr *req_userhdr = info->userhdr;
int hdr_space = nlmsg_total_size(GENL_HDRLEN + TIPC_GENL_HDRLEN);
u16 cmd;
if ((req_userhdr->cmd & 0xC000) &&
(!netlink_net_capable(skb, CAP_NET_ADMIN)))
cmd = TIPC_CMD_NOT_NET_ADMIN;
else
cmd = req_userhdr->cmd;
rep_buf = tipc_cfg_do_cmd(net, req_userhdr->dest, cmd,
nlmsg_data(req_nlh) + GENL_HDRLEN +
TIPC_GENL_HDRLEN,
nlmsg_attrlen(req_nlh, GENL_HDRLEN +
TIPC_GENL_HDRLEN), hdr_space);
if (rep_buf) {
skb_push(rep_buf, hdr_space);
rep_nlh = nlmsg_hdr(rep_buf);
memcpy(rep_nlh, req_nlh, hdr_space);
rep_nlh->nlmsg_len = rep_buf->len;
genlmsg_unicast(net, rep_buf, NETLINK_CB(skb).portid);
}
return 0;
}
/* Temporary function to keep functionality throughout the patchset
* without having to mess with the global variables and other trickery
* of the old API.
*/
static int tipc_nl_compat_tmp_wrap(struct sk_buff *skb, struct genl_info *info)
{
struct tipc_genlmsghdr *req = info->userhdr;
switch (req->cmd) {
case TIPC_CMD_GET_BEARER_NAMES:
case TIPC_CMD_ENABLE_BEARER:
case TIPC_CMD_DISABLE_BEARER:
case TIPC_CMD_SHOW_LINK_STATS:
case TIPC_CMD_GET_LINKS:
case TIPC_CMD_SET_LINK_TOL:
case TIPC_CMD_SET_LINK_PRI:
case TIPC_CMD_SET_LINK_WINDOW:
case TIPC_CMD_RESET_LINK_STATS:
case TIPC_CMD_SHOW_NAME_TABLE:
case TIPC_CMD_SHOW_PORTS:
case TIPC_CMD_GET_MEDIA_NAMES:
case TIPC_CMD_GET_NODES:
case TIPC_CMD_SET_NODE_ADDR:
case TIPC_CMD_SET_NETID:
case TIPC_CMD_GET_NETID:
case TIPC_CMD_SHOW_STATS:
return tipc_nl_compat_recv(skb, info);
}
return handle_cmd(skb, info);
}
static struct genl_family tipc_genl_compat_family = {
.id = GENL_ID_GENERATE,
.name = TIPC_GENL_NAME,
......@@ -1121,7 +1060,7 @@ static struct genl_family tipc_genl_compat_family = {
static struct genl_ops tipc_genl_compat_ops[] = {
{
.cmd = TIPC_GENL_CMD,
.doit = tipc_nl_compat_tmp_wrap,
.doit = tipc_nl_compat_recv,
},
};
......
......@@ -35,7 +35,7 @@
*/
#include "core.h"
#include "config.h"
#include "link.h"
#include "node.h"
#include "name_distr.h"
#include "socket.h"
......
......@@ -40,7 +40,6 @@
#include "name_table.h"
#include "node.h"
#include "link.h"
#include "config.h"
#include "name_distr.h"
#include "socket.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册