提交 21c28582 编写于 作者: A Andrew de Quincey 提交者: Mauro Carvalho Chehab

V4L/DVB (3933): Add isl6421 module

Driver for the ISL6421 LNB chip
Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 d020542f
......@@ -226,4 +226,10 @@ config DVB_LNBP21
help
An SEC control chip.
config DVB_ISL6421
tristate "ISL6421 SEC controller"
depends on DVB_CORE
help
An SEC control chip.
endmenu
......@@ -32,3 +32,4 @@ obj-$(CONFIG_DVB_S5H1420) += s5h1420.o
obj-$(CONFIG_DVB_LGDT330X) += lgdt330x.o
obj-$(CONFIG_DVB_CX24123) += cx24123.o
obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
obj-$(CONFIG_DVB_ISL6421) += isl6421.o
/*
* isl6421.h - driver for lnb supply and control ic ISL6421
*
* Copyright (C) 2006 Andrew de Quincey
* Copyright (C) 2006 Oliver Endriss
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
* the project's page is at http://www.linuxtv.org
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/slab.h>
#include "dvb_frontend.h"
#include "isl6421.h"
struct isl6421 {
u8 config;
u8 override_or;
u8 override_and;
struct i2c_adapter *i2c;
u8 i2c_addr;
void (*release_chain)(struct dvb_frontend* fe);
};
static int isl6421_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct isl6421 *isl6421 = (struct isl6421 *) fe->misc_priv;
struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
.buf = &isl6421->config,
.len = sizeof(isl6421->config) };
isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
switch(voltage) {
case SEC_VOLTAGE_OFF:
break;
case SEC_VOLTAGE_13:
isl6421->config |= ISL6421_EN1;
break;
case SEC_VOLTAGE_18:
isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1);
break;
default:
return -EINVAL;
};
isl6421->config |= isl6421->override_or;
isl6421->config &= isl6421->override_and;
return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
}
static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
{
struct isl6421 *isl6421 = (struct isl6421 *) fe->misc_priv;
struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
.buf = &isl6421->config,
.len = sizeof(isl6421->config) };
if (arg)
isl6421->config |= ISL6421_LLC1;
else
isl6421->config &= ~ISL6421_LLC1;
isl6421->config |= isl6421->override_or;
isl6421->config &= isl6421->override_and;
return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
}
static void isl6421_release(struct dvb_frontend *fe)
{
struct isl6421 *isl6421 = (struct isl6421 *) fe->misc_priv;
/* power off */
isl6421_set_voltage(fe, SEC_VOLTAGE_OFF);
/* free data & call next release routine */
fe->ops->release = isl6421->release_chain;
kfree(fe->misc_priv);
fe->misc_priv = NULL;
if (fe->ops->release)
fe->ops->release(fe);
}
int isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
u8 override_set, u8 override_clear)
{
struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL);
if (!isl6421)
return -ENOMEM;
/* default configuration */
isl6421->config = ISL6421_ISEL1;
isl6421->i2c = i2c;
isl6421->i2c_addr = i2c_addr;
fe->misc_priv = isl6421;
/* bits which should be forced to '1' */
isl6421->override_or = override_set;
/* bits which should be forced to '0' */
isl6421->override_and = ~override_clear;
/* detect if it is present or not */
if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
kfree(isl6421);
fe->misc_priv = NULL;
return -EIO;
}
/* install release callback */
isl6421->release_chain = fe->ops->release;
fe->ops->release = isl6421_release;
/* override frontend ops */
fe->ops->set_voltage = isl6421_set_voltage;
fe->ops->enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage;
return 0;
}
EXPORT_SYMBOL(isl6421_attach);
MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421");
MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss");
MODULE_LICENSE("GPL");
/*
* isl6421.h - driver for lnb supply and control ic ISL6421
*
* Copyright (C) 2006 Andrew de Quincey
* Copyright (C) 2006 Oliver Endriss
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
* the project's page is at http://www.linuxtv.org
*/
#ifndef _ISL6421_H
#define _ISL6421_H
#include <linux/dvb/frontend.h>
/* system register bits */
#define ISL6421_OLF1 0x01
#define ISL6421_EN1 0x02
#define ISL6421_VSEL1 0x04
#define ISL6421_LLC1 0x08
#define ISL6421_ENT1 0x10
#define ISL6421_ISEL1 0x20
#define ISL6421_DCL 0x40
/* override_set and override_clear control which system register bits (above) to always set & clear */
extern int isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
u8 override_set, u8 override_clear);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册