Merge tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes

Two 3.14 specific fixes, two cc: stable.

* tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Don't enable display error interrupts from the start
  drm/i915: Fix scanline counter fixup on BDW
  drm/i915: Add a workaround for HSW scanline counter weirdness
  drm/i915: Fix PSR programming

drivers/gpu/drm/i915/i915_irq.c

@@ -618,33 +618,25 @@ static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
 
 /* raw reads, only for fast reads of display block, no need for forcewake etc. */
 #define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
-#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + (reg__))
 
 static bool ilk_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t status;
-
-	if (INTEL_INFO(dev)->gen < 7) {
-		status = pipe == PIPE_A ?
-			DE_PIPEA_VBLANK :
-			DE_PIPEB_VBLANK;
+	int reg;
+
+	if (INTEL_INFO(dev)->gen >= 8) {
+		status = GEN8_PIPE_VBLANK;
+		reg = GEN8_DE_PIPE_ISR(pipe);
+	} else if (INTEL_INFO(dev)->gen >= 7) {
+		status = DE_PIPE_VBLANK_IVB(pipe);
+		reg = DEISR;
 	} else {
-		switch (pipe) {
-		default:
-		case PIPE_A:
-			status = DE_PIPEA_VBLANK_IVB;
-			break;
-		case PIPE_B:
-			status = DE_PIPEB_VBLANK_IVB;
-			break;
-		case PIPE_C:
-			status = DE_PIPEC_VBLANK_IVB;
-			break;
-		}
+		status = DE_PIPE_VBLANK(pipe);
+		reg = DEISR;
 	}
 
-	return __raw_i915_read32(dev_priv, DEISR) & status;
+	return __raw_i915_read32(dev_priv, reg) & status;
 }
 
 static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
@@ -702,7 +694,28 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
 		else
 			position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
 
-		if (HAS_PCH_SPLIT(dev)) {
+		if (HAS_DDI(dev)) {
+			/*
+			 * On HSW HDMI outputs there seems to be a 2 line
+			 * difference, whereas eDP has the normal 1 line
+			 * difference that earlier platforms have. External
+			 * DP is unknown. For now just check for the 2 line
+			 * difference case on all output types on HSW+.
+			 *
+			 * This might misinterpret the scanline counter being
+			 * one line too far along on eDP, but that's less
+			 * dangerous than the alternative since that would lead
+			 * the vblank timestamp code astray when it sees a
+			 * scanline count before vblank_start during a vblank
+			 * interrupt.
+			 */
+			in_vbl = ilk_pipe_in_vblank_locked(dev, pipe);
+			if ((in_vbl && (position == vbl_start - 2 ||
+					position == vbl_start - 1)) ||
+			    (!in_vbl && (position == vbl_end - 2 ||
+					 position == vbl_end - 1)))
+				position = (position + 2) % vtotal;
+		} else if (HAS_PCH_SPLIT(dev)) {
 			/*
 			 * The scanline counter increments at the leading edge
 			 * of hsync, ie. it completely misses the active portion
@@ -2769,10 +2782,9 @@ static void ibx_irq_postinstall(struct drm_device *dev)
 		return;
 
 	if (HAS_PCH_IBX(dev)) {
-		mask = SDE_GMBUS | SDE_AUX_MASK | SDE_TRANSB_FIFO_UNDER |
-		       SDE_TRANSA_FIFO_UNDER | SDE_POISON;
+		mask = SDE_GMBUS | SDE_AUX_MASK | SDE_POISON;
 	} else {
-		mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT | SDE_ERROR_CPT;
+		mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT;
 
 		I915_WRITE(SERR_INT, I915_READ(SERR_INT));
 	}
@@ -2832,20 +2844,19 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 		display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE_IVB |
 				DE_PCH_EVENT_IVB | DE_PLANEC_FLIP_DONE_IVB |
 				DE_PLANEB_FLIP_DONE_IVB |
-				DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB |
-				DE_ERR_INT_IVB);
+				DE_PLANEA_FLIP_DONE_IVB | DE_AUX_CHANNEL_A_IVB);
 		extra_mask = (DE_PIPEC_VBLANK_IVB | DE_PIPEB_VBLANK_IVB |
-			      DE_PIPEA_VBLANK_IVB);
+			      DE_PIPEA_VBLANK_IVB | DE_ERR_INT_IVB);
 
 		I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
 	} else {
 		display_mask = (DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
 				DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE |
 				DE_AUX_CHANNEL_A |
-				DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN |
 				DE_PIPEB_CRC_DONE | DE_PIPEA_CRC_DONE |
 				DE_POISON);
-		extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT;
+		extra_mask = DE_PIPEA_VBLANK | DE_PIPEB_VBLANK | DE_PCU_EVENT |
+				DE_PIPEB_FIFO_UNDERRUN | DE_PIPEA_FIFO_UNDERRUN;
 	}
 
 	dev_priv->irq_mask = ~display_mask;
@@ -2961,9 +2972,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 	struct drm_device *dev = dev_priv->dev;
 	uint32_t de_pipe_masked = GEN8_PIPE_FLIP_DONE |
 		GEN8_PIPE_CDCLK_CRC_DONE |
-		GEN8_PIPE_FIFO_UNDERRUN |
 		GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
-	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK;
+	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
+		GEN8_PIPE_FIFO_UNDERRUN;
 	int pipe;
 	dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
 	dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;

drivers/gpu/drm/i915/intel_dp.c

@@ -1639,7 +1639,7 @@ static void intel_edp_psr_enable_source(struct intel_dp *intel_dp)
 		val |= EDP_PSR_LINK_DISABLE;
 
 	I915_WRITE(EDP_PSR_CTL(dev), val |
-		   IS_BROADWELL(dev) ? 0 : link_entry_time |
+		   (IS_BROADWELL(dev) ? 0 : link_entry_time) |
 		   max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
 		   idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
 		   EDP_PSR_ENABLE);