提交 20f97caf 编写于 作者: R Rafael J. Wysocki

PM / QoS: Drop PM_QOS_FLAG_REMOTE_WAKEUP

The PM QoS flag PM_QOS_FLAG_REMOTE_WAKEUP is not used consistently
and the vast majority of code simply assumes that remote wakeup
should be enabled for devices in runtime suspend if they can
generate wakeup signals, so drop it.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
上级 8a5776a5
......@@ -258,19 +258,3 @@ Description:
This attribute has no effect on system-wide suspend/resume and
hibernation.
What: /sys/devices/.../power/pm_qos_remote_wakeup
Date: September 2012
Contact: Rafael J. Wysocki <rjw@rjwysocki.net>
Description:
The /sys/devices/.../power/pm_qos_remote_wakeup attribute
is used for manipulating the PM QoS "remote wakeup required"
flag. If set, this flag indicates to the kernel that the
device is a source of user events that have to be signaled from
its low-power states.
Not all drivers support this attribute. If it isn't supported,
it is not present.
This attribute has no effect on system-wide suspend/resume and
hibernation.
......@@ -98,8 +98,7 @@ Values are updated in response to changes of the request list.
The target values of resume latency and active state latency tolerance are
simply the minimum of the request values held in the parameter list elements.
The PM QoS flags aggregate value is a gather (bitwise OR) of all list elements'
values. Two device PM QoS flags are defined currently: PM_QOS_FLAG_NO_POWER_OFF
and PM_QOS_FLAG_REMOTE_WAKEUP.
values. One device PM QoS flag is defined currently: PM_QOS_FLAG_NO_POWER_OFF.
Note: The aggregated target values are implemented in such a way that reading
the aggregated value does not require any locking mechanism.
......@@ -153,14 +152,14 @@ PM QoS list of resume latency constraints and remove sysfs attribute
pm_qos_resume_latency_us from the device's power directory.
int dev_pm_qos_expose_flags(device, value)
Add a request to the device's PM QoS list of flags and create sysfs attributes
pm_qos_no_power_off and pm_qos_remote_wakeup under the device's power directory
allowing user space to change these flags' value.
Add a request to the device's PM QoS list of flags and create sysfs attribute
pm_qos_no_power_off under the device's power directory allowing user space to
change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
void dev_pm_qos_hide_flags(device)
Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list
of flags and remove sysfs attributes pm_qos_no_power_off and pm_qos_remote_wakeup
under the device's power directory.
of flags and remove sysfs attribute pm_qos_no_power_off from the device's power
directory.
Notification mechanisms:
The per-device PM QoS framework has a per-device notification tree.
......
......@@ -581,8 +581,7 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
d_min = ret;
wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
&& adev->wakeup.sleep_state >= target_state;
} else if (dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) !=
PM_QOS_FLAGS_NONE) {
} else {
wakeup = adev->wakeup.flags.valid;
}
......@@ -865,8 +864,7 @@ int acpi_dev_runtime_suspend(struct device *dev)
if (!adev)
return 0;
remote_wakeup = dev_pm_qos_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP) >
PM_QOS_FLAGS_NONE;
remote_wakeup = acpi_device_can_wakeup(adev);
if (remote_wakeup) {
error = acpi_device_wakeup_enable(adev, ACPI_STATE_S0);
if (error)
......
......@@ -346,9 +346,7 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on,
list_for_each_entry(pdd, &genpd->dev_list, list_node) {
enum pm_qos_flags_status stat;
stat = dev_pm_qos_flags(pdd->dev,
PM_QOS_FLAG_NO_POWER_OFF
| PM_QOS_FLAG_REMOTE_WAKEUP);
stat = dev_pm_qos_flags(pdd->dev, PM_QOS_FLAG_NO_POWER_OFF);
if (stat > PM_QOS_FLAGS_NONE)
return -EBUSY;
......
......@@ -309,33 +309,6 @@ static ssize_t pm_qos_no_power_off_store(struct device *dev,
static DEVICE_ATTR(pm_qos_no_power_off, 0644,
pm_qos_no_power_off_show, pm_qos_no_power_off_store);
static ssize_t pm_qos_remote_wakeup_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev)
& PM_QOS_FLAG_REMOTE_WAKEUP));
}
static ssize_t pm_qos_remote_wakeup_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t n)
{
int ret;
if (kstrtoint(buf, 0, &ret))
return -EINVAL;
if (ret != 0 && ret != 1)
return -EINVAL;
ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_REMOTE_WAKEUP, ret);
return ret < 0 ? ret : n;
}
static DEVICE_ATTR(pm_qos_remote_wakeup, 0644,
pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store);
#ifdef CONFIG_PM_SLEEP
static const char _enabled[] = "enabled";
static const char _disabled[] = "disabled";
......@@ -671,7 +644,6 @@ static const struct attribute_group pm_qos_latency_tolerance_attr_group = {
static struct attribute *pm_qos_flags_attrs[] = {
&dev_attr_pm_qos_no_power_off.attr,
&dev_attr_pm_qos_remote_wakeup.attr,
NULL,
};
static const struct attribute_group pm_qos_flags_attr_group = {
......
......@@ -39,7 +39,6 @@ enum pm_qos_flags_status {
#define PM_QOS_LATENCY_ANY ((s32)(~(__u32)0 >> 1))
#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0)
#define PM_QOS_FLAG_REMOTE_WAKEUP (1 << 1)
struct pm_qos_request {
struct plist_node node;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册