wl1251: implement hardware ARP filtering

Update hardware ARP filter configuration on BSS_CHANGED_ARP_FILTER
notification from mac80211.
Ported from wl1271 driver.
Signed-off-by: NDavid Gnedt <david.gnedt@davizone.at>
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ti/wl1251/acx.c

@@ -960,6 +960,32 @@ int wl1251_acx_bet_enable(struct wl1251 *wl, enum wl1251_acx_bet_mode mode,
 	return ret;
 }
 
+int wl1251_acx_arp_ip_filter(struct wl1251 *wl, bool enable, __be32 address)
+{
+	struct wl1251_acx_arp_filter *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx arp ip filter, enable: %d", enable);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx)
+		return -ENOMEM;
+
+	acx->version = ACX_IPV4_VERSION;
+	acx->enable = enable;
+
+	if (enable)
+		memcpy(acx->address, &address, ACX_IPV4_ADDR_SIZE);
+
+	ret = wl1251_cmd_configure(wl, ACX_ARP_IP_FILTER,
+				   acx, sizeof(*acx));
+	if (ret < 0)
+		wl1251_warning("failed to set arp ip filter: %d", ret);
+
+	kfree(acx);
+	return ret;
+}
+
 int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
 		      u8 aifs, u16 txop)
 {

drivers/net/wireless/ti/wl1251/acx.h

@@ -1232,6 +1232,20 @@ struct wl1251_acx_bet_enable {
 	u8 padding[2];
 } __packed;
 
+#define ACX_IPV4_VERSION 4
+#define ACX_IPV6_VERSION 6
+#define ACX_IPV4_ADDR_SIZE 4
+struct wl1251_acx_arp_filter {
+	struct acx_header header;
+	u8 version;	/* The IP version: 4 - IPv4, 6 - IPv6.*/
+	u8 enable;	/* 1 - ARP filtering is enabled, 0 - disabled */
+	u8 padding[2];
+	u8 address[16];	/* The IP address used to filter ARP packets.
+			   ARP packets that do not match this address are
+			   dropped. When the IP Version is 4, the last 12
+			   bytes of the the address are ignored. */
+} __attribute__((packed));
+
 struct wl1251_acx_ac_cfg {
 	struct acx_header header;
 
@@ -1473,6 +1487,7 @@ int wl1251_acx_mem_cfg(struct wl1251 *wl);
 int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim);
 int wl1251_acx_bet_enable(struct wl1251 *wl, enum wl1251_acx_bet_mode mode,
 			  u8 max_consecutive);
+int wl1251_acx_arp_ip_filter(struct wl1251 *wl, bool enable, __be32 address);
 int wl1251_acx_ac_cfg(struct wl1251 *wl, u8 ac, u8 cw_min, u16 cw_max,
 		      u8 aifs, u16 txop);
 int wl1251_acx_tid_cfg(struct wl1251 *wl, u8 queue,

drivers/net/wireless/ti/wl1251/main.c

@@ -979,6 +979,7 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct wl1251 *wl = hw->priv;
 	struct sk_buff *beacon, *skb;
+	bool enable;
 	int ret;
 
 	wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
@@ -1077,6 +1078,17 @@ static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	if (changed & BSS_CHANGED_ARP_FILTER) {
+		__be32 addr = bss_conf->arp_addr_list[0];
+		WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
+
+		enable = bss_conf->arp_addr_cnt == 1 && bss_conf->assoc;
+		wl1251_acx_arp_ip_filter(wl, enable, addr);
+
+		if (ret < 0)
+			goto out_sleep;
+	}
+
 	if (changed & BSS_CHANGED_BEACON) {
 		beacon = ieee80211_beacon_get(hw, vif);
 		if (!beacon)