提交 1ffe627d 编写于 作者: H Hiroshi DOYU 提交者: Tony Lindgren

omap: mailbox: Execute softreset at startup

The softreset at startup is introduced as TRM describes and also some
register bit definitions are added instead of magic number.
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 41a03c53
......@@ -30,6 +30,14 @@
#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u)))
#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1))
/* SYSCONFIG: register bit definition */
#define AUTOIDLE (1 << 0)
#define SOFTRESET (1 << 1)
#define SMARTIDLE (2 << 3)
/* SYSSTATUS: register bit definition */
#define RESETDONE (1 << 0)
#define MBOX_REG_SIZE 0x120
#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
......@@ -69,21 +77,33 @@ static inline void mbox_write_reg(u32 val, size_t ofs)
/* Mailbox H/W preparations */
static int omap2_mbox_startup(struct omap_mbox *mbox)
{
unsigned int l;
u32 l;
unsigned long timeout;
mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
if (IS_ERR(mbox_ick_handle)) {
printk("Could not get mailboxes_ick\n");
pr_err("Can't get mailboxes_ick\n");
return -ENODEV;
}
clk_enable(mbox_ick_handle);
mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
timeout = jiffies + msecs_to_jiffies(20);
do {
l = mbox_read_reg(MAILBOX_SYSSTATUS);
if (l & RESETDONE)
break;
} while (time_after(jiffies, timeout));
if (!(l & RESETDONE)) {
pr_err("Can't take mmu out of reset\n");
return -ENODEV;
}
l = mbox_read_reg(MAILBOX_REVISION);
pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
/* set smart-idle & autoidle */
l = mbox_read_reg(MAILBOX_SYSCONFIG);
l |= 0x00000011;
l = SMARTIDLE | AUTOIDLE;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
omap2_mbox_enable_irq(mbox, IRQ_RX);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册