regulator: use of_property_read_{bool|u32}()

Use more compact of_property_read_{bool|u32}() calls instead of the
of_{find|get}_property() calls in of_get_regulation_constraints() where
possible (note that of_property_read_{bool|u32}() were already used to read
some properties).
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

drivers/regulator/of_regulator.c

@@ -19,9 +19,7 @@
 static void of_get_regulation_constraints(struct device_node *np,
 					struct regulator_init_data **init_data)
 {
-	const __be32 *min_uV, *max_uV, *uV_offset;
-	const __be32 *min_uA, *max_uA, *ramp_delay;
-	struct property *prop;
+	const __be32 *min_uV, *max_uV;
 	struct regulation_constraints *constraints = &(*init_data)->constraints;
 	int ret;
 	u32 pval;
@@ -42,36 +40,29 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
 		constraints->apply_uV = true;
 
-	uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL);
-	if (uV_offset)
-		constraints->uV_offset = be32_to_cpu(*uV_offset);
-	min_uA = of_get_property(np, "regulator-min-microamp", NULL);
-	if (min_uA)
-		constraints->min_uA = be32_to_cpu(*min_uA);
-	max_uA = of_get_property(np, "regulator-max-microamp", NULL);
-	if (max_uA)
-		constraints->max_uA = be32_to_cpu(*max_uA);
+	if (!of_property_read_u32(np, "regulator-microvolt-offset", &pval))
+		constraints->uV_offset = pval;
+	if (!of_property_read_u32(np, "regulator-min-microamp", &pval))
+		constraints->min_uA = pval;
+	if (!of_property_read_u32(np, "regulator-max-microamp", &pval))
+		constraints->max_uA = pval;
 
 	/* Current change possible? */
 	if (constraints->min_uA != constraints->max_uA)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;
 
-	if (of_find_property(np, "regulator-boot-on", NULL))
-		constraints->boot_on = true;
-
-	if (of_find_property(np, "regulator-always-on", NULL))
-		constraints->always_on = true;
-	else /* status change should be possible if not always on. */
+	constraints->boot_on = of_property_read_bool(np, "regulator-boot-on");
+	constraints->always_on = of_property_read_bool(np, "regulator-always-on");
+	if (!constraints->always_on) /* status change should be possible. */
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;
 
 	if (of_property_read_bool(np, "regulator-allow-bypass"))
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_BYPASS;
 
-	prop = of_find_property(np, "regulator-ramp-delay", NULL);
-	if (prop && prop->value) {
-		ramp_delay = prop->value;
-		if (*ramp_delay)
-			constraints->ramp_delay = be32_to_cpu(*ramp_delay);
+	ret = of_property_read_u32(np, "regulator-ramp-delay", &pval);
+	if (!ret) {
+		if (pval)
+			constraints->ramp_delay = pval;
 		else
 			constraints->ramp_disable = true;
 	}