提交 1decd2ec 编写于 作者: L Linus Walleij 提交者: David S. Miller

net: dsa: Add DT bindings for Vitesse VSC73xx switches

This adds the device tree bindings for the Vitesse VSC73xx
switches. We also add the vendor name for Vitesse.

Cc: devicetree@vger.kernel.org
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 b6803408
Vitesse VSC73xx Switches
========================
This defines device tree bindings for the Vitesse VSC73xx switch chips.
The Vitesse company has been acquired by Microsemi and Microsemi in turn
acquired by Microchip but retains this vendor branding.
The currently supported switch chips are:
Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch
Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch
Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch
Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch
The device tree node is an SPI device so it must reside inside a SPI bus
device tree node, see spi/spi-bus.txt
Required properties:
- compatible: must be exactly one of:
"vitesse,vsc7385"
"vitesse,vsc7388"
"vitesse,vsc7395"
"vitesse,vsc7398"
- gpio-controller: indicates that this switch is also a GPIO controller,
see gpio/gpio.txt
- #gpio-cells: this must be set to <2> and indicates that we are a twocell
GPIO controller, see gpio/gpio.txt
Optional properties:
- reset-gpios: a handle to a GPIO line that can issue reset of the chip.
It should be tagged as active low.
Required subnodes:
See net/dsa/dsa.txt for a list of additional required and optional properties
and subnodes of DSA switches.
Examples:
switch@0 {
compatible = "vitesse,vsc7395";
reg = <0>;
/* Specified for 2.5 MHz or below */
spi-max-frequency = <2500000>;
gpio-controller;
#gpio-cells = <2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
vsc: port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
......@@ -395,6 +395,7 @@ v3 V3 Semiconductor
variscite Variscite Ltd.
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
vitesse Vitesse Semiconductor Corporation
vivante Vivante Corporation
vocore VoCore Studio
voipac Voipac Technologies s.r.o.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册