ASoC: dapm: Run clock and regulator events separately to other supplies

In order to avoid trying to use an external clock or supply for an
on-chip supply prior to it being enabled move the clock and regulator
supply events to a separate step in DAPM sequencing from normal supply
events.

This should have minimal practical impact since these widgets are sorted
using SND_SOC_NOPM which is a negative value and hence sorted
separately to any real register writes, though it may be relevant if
supplies have event callbacks only.
Signed-off-by: NMark Brown <broonie@linaro.org>

sound/soc/soc-dapm.c

@@ -59,31 +59,31 @@ snd_soc_dapm_new_control(struct snd_soc_dapm_context *dapm,
 /* dapm power sequences - make this per codec in the future */
 static int dapm_up_seq[] = {
 	[snd_soc_dapm_pre] = 0,
-	[snd_soc_dapm_supply] = 1,
 	[snd_soc_dapm_regulator_supply] = 1,
 	[snd_soc_dapm_clock_supply] = 1,
-	[snd_soc_dapm_micbias] = 2,
+	[snd_soc_dapm_supply] = 2,
+	[snd_soc_dapm_micbias] = 3,
 	[snd_soc_dapm_dai_link] = 2,
-	[snd_soc_dapm_dai_in] = 3,
-	[snd_soc_dapm_dai_out] = 3,
-	[snd_soc_dapm_aif_in] = 3,
-	[snd_soc_dapm_aif_out] = 3,
-	[snd_soc_dapm_mic] = 4,
-	[snd_soc_dapm_mux] = 5,
-	[snd_soc_dapm_virt_mux] = 5,
-	[snd_soc_dapm_value_mux] = 5,
-	[snd_soc_dapm_dac] = 6,
-	[snd_soc_dapm_switch] = 7,
-	[snd_soc_dapm_mixer] = 7,
-	[snd_soc_dapm_mixer_named_ctl] = 7,
-	[snd_soc_dapm_pga] = 8,
-	[snd_soc_dapm_adc] = 9,
-	[snd_soc_dapm_out_drv] = 10,
-	[snd_soc_dapm_hp] = 10,
-	[snd_soc_dapm_spk] = 10,
-	[snd_soc_dapm_line] = 10,
-	[snd_soc_dapm_kcontrol] = 11,
-	[snd_soc_dapm_post] = 12,
+	[snd_soc_dapm_dai_in] = 4,
+	[snd_soc_dapm_dai_out] = 4,
+	[snd_soc_dapm_aif_in] = 4,
+	[snd_soc_dapm_aif_out] = 4,
+	[snd_soc_dapm_mic] = 5,
+	[snd_soc_dapm_mux] = 6,
+	[snd_soc_dapm_virt_mux] = 6,
+	[snd_soc_dapm_value_mux] = 6,
+	[snd_soc_dapm_dac] = 7,
+	[snd_soc_dapm_switch] = 8,
+	[snd_soc_dapm_mixer] = 8,
+	[snd_soc_dapm_mixer_named_ctl] = 8,
+	[snd_soc_dapm_pga] = 9,
+	[snd_soc_dapm_adc] = 10,
+	[snd_soc_dapm_out_drv] = 11,
+	[snd_soc_dapm_hp] = 11,
+	[snd_soc_dapm_spk] = 11,
+	[snd_soc_dapm_line] = 11,
+	[snd_soc_dapm_kcontrol] = 12,
+	[snd_soc_dapm_post] = 13,
 };
 
 static int dapm_down_seq[] = {
@@ -109,10 +109,10 @@ static int dapm_down_seq[] = {
 	[snd_soc_dapm_dai_in] = 10,
 	[snd_soc_dapm_dai_out] = 10,
 	[snd_soc_dapm_dai_link] = 11,
-	[snd_soc_dapm_clock_supply] = 12,
-	[snd_soc_dapm_regulator_supply] = 12,
 	[snd_soc_dapm_supply] = 12,
-	[snd_soc_dapm_post] = 13,
+	[snd_soc_dapm_clock_supply] = 13,
+	[snd_soc_dapm_regulator_supply] = 13,
+	[snd_soc_dapm_post] = 14,
 };
 
 static void pop_wait(u32 pop_time)