DRM/I915: Add enum hpd_pin to intel_encoder.

To clean up hotplug support we add a new enum to intel_encoder:
enum hpd_pin. It allows the encoder to request a hpd line but leave
the details which IRQ is responsible on which chipset generation
to i915_irq.c.
This way requesting hotplug support will become really simple on
the encoder/connector level.
Signed-off-by: NEgbert Eich <eich@suse.de>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -86,6 +86,19 @@ enum port {
 };
 #define port_name(p) ((p) + 'A')
 
+enum hpd_pin {
+	HPD_NONE = 0,
+	HPD_PORT_A = HPD_NONE, /* PORT_A is internal */
+	HPD_TV = HPD_NONE,     /* TV is known to be unreliable */
+	HPD_CRT,
+	HPD_SDVO_B,
+	HPD_SDVO_C,
+	HPD_PORT_B,
+	HPD_PORT_C,
+	HPD_PORT_D,
+	HPD_NUM_PINS
+};
+
 #define I915_GEM_GPU_DOMAINS \
 	(I915_GEM_DOMAIN_RENDER | \
 	 I915_GEM_DOMAIN_SAMPLER | \

drivers/gpu/drm/i915/intel_crt.c

@@ -776,6 +776,8 @@ void intel_crt_init(struct drm_device *dev)
 
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
+	if (I915_HAS_HOTPLUG(dev))
+		crt->base.hpd_pin = HPD_CRT;
 	if (HAS_DDI(dev))
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
 	else

drivers/gpu/drm/i915/intel_dp.c

@@ -2821,18 +2821,22 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	/* Set up the DDC bus. */
 	switch (port) {
 	case PORT_A:
+		intel_encoder->hpd_pin = HPD_PORT_A;
 		name = "DPDDC-A";
 		break;
 	case PORT_B:
 		dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_B;
 		name = "DPDDC-B";
 		break;
 	case PORT_C:
 		dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_C;
 		name = "DPDDC-C";
 		break;
 	case PORT_D:
 		dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
+		intel_encoder->hpd_pin = HPD_PORT_D;
 		name = "DPDDC-D";
 		break;
 	default:

drivers/gpu/drm/i915/intel_drv.h

@@ -168,6 +168,7 @@ struct intel_encoder {
 	 * it is connected to in the pipe parameter. */
 	bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
 	int crtc_mask;
+	enum hpd_pin hpd_pin;
 };
 
 struct intel_panel {

drivers/gpu/drm/i915/intel_hdmi.c

@@ -988,17 +988,21 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	switch (port) {
 	case PORT_B:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
+		intel_encoder->hpd_pin = HPD_PORT_B;
 		dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
 		break;
 	case PORT_C:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
+		intel_encoder->hpd_pin = HPD_PORT_C;
 		dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
 		break;
 	case PORT_D:
 		intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
+		intel_encoder->hpd_pin = HPD_PORT_D;
 		dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
 		break;
 	case PORT_A:
+		intel_encoder->hpd_pin = HPD_PORT_A;
 		/* Internal port only for eDP. */
 	default:
 		BUG();

drivers/gpu/drm/i915/intel_sdvo.c

@@ -2779,6 +2779,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 			SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915;
 	}
 
+	if (intel_sdvo->hotplug_active)
+		intel_encoder->hpd_pin = HPD_SDVO_B ? HPD_SDVO_B : HPD_SDVO_C;
+
 	drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
 
 	intel_encoder->disable = intel_disable_sdvo;