Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 1ccdde05 编写于 作者: N Nicolas Ferre
浏览文件
操作

ARM: at91: remove legacy IRQ driver and related code 

Remove irc.c and associated header file. The related code was idendified by
the CONFIG_OLD_IRQ_AT91 option that was removed previously. It has been spotted
by following coccinelle semantic match:

@rule1@
expression E;
statement S;
@@
(
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91)) S
|
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && E) S
)

Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
上级 ff78a189
隐藏空白更改
内联 并排
Showing with 0 addition and 427 deletion
arch/arm/mach-at91/Makefile
浏览文件 @ 1ccdde05
......@@ -4,7 +4,6 @@
obj-y := gpio.o setup.o sysirq_mask.o
obj-$(CONFIG_OLD_IRQ_AT91) += irq.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
......
arch/arm/mach-at91/at91_aic.h 已删除 100644 → 0
浏览文件 @ ff78a189
/*
* arch/arm/mach-at91/include/mach/at91_aic.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* Advanced Interrupt Controller (AIC) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_AIC_H
#define AT91_AIC_H
#ifndef __ASSEMBLY__
extern void __iomem *at91_aic_base;
#define at91_aic_read(field) \
__raw_readl(at91_aic_base + field)
#define at91_aic_write(field, value) \
__raw_writel(value, at91_aic_base + field)
#else
.extern at91_aic_base
#endif
/* Number of irq lines managed by AIC */
#define NR_AIC_IRQS 32
#define NR_AIC5_IRQS 128
#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */
#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */
#define AT91_AIC_IRQ_MIN_PRIORITY 0
#define AT91_AIC_IRQ_MAX_PRIORITY 7
#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */
#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
#define AT91_AIC_SRCTYPE_LOW (0 << 5)
#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
#define AT91_AIC_SRCTYPE_RISING (3 << 5)
#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */
#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */
#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */
#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */
#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */
#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */
#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */
#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */
#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */
#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */
#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */
#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */
#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */
#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */
#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */
#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */
#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */
#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */
#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */
#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */
#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */
#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */
#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */
#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */
#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */
#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */
#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */
#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */
#define AT91_AIC_DCR 0x138 /* Debug Control Register */
#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */
#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */
#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */
#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */
#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */
#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */
#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */
void at91_aic_handle_irq(struct pt_regs *regs);
void at91_aic5_handle_irq(struct pt_regs *regs);
#endif
arch/arm/mach-at91/board-dt-rm9200.c
浏览文件 @ 1ccdde05
......@@ -22,7 +22,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "at91_aic.h"
#include "generic.h"
static void __init at91rm9200_dt_timer_init(void)
......
arch/arm/mach-at91/board-dt-sam9.c
浏览文件 @ 1ccdde05
......@@ -21,7 +21,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "at91_aic.h"
#include "board.h"
#include "generic.h"
......
arch/arm/mach-at91/board-dt-sama5.c
浏览文件 @ 1ccdde05
......@@ -24,7 +24,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "at91_aic.h"
#include "generic.h"
static void __init sama5_dt_device_init(void)
......
arch/arm/mach-at91/generic.h
浏览文件 @ 1ccdde05
......@@ -29,8 +29,6 @@ extern void __init at91_dt_initialize(void);
/* Interrupts */
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[],
unsigned int ext_irq_mask);
extern int __init at91_aic_of_init(struct device_node *node,
struct device_node *parent);
extern int __init at91_aic5_of_init(struct device_node *node,
......
arch/arm/mach-at91/irq.c 已删除 100644 → 0
浏览文件 @ ff78a189
/*
* linux/arch/arm/mach-at91/irq.c
*
* Copyright (C) 2004 SAN People
* Copyright (C) 2004 ATMEL
* Copyright (C) Rick Bronson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/bitmap.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqdomain.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include "at91_aic.h"
void __iomem *at91_aic_base;
static struct irq_domain *at91_aic_domain;
static struct device_node *at91_aic_np;
static unsigned int n_irqs = NR_AIC_IRQS;
#ifdef CONFIG_PM
static unsigned long *wakeups;
static unsigned long *backups;
#define set_backup(bit) set_bit(bit, backups)
#define clear_backup(bit) clear_bit(bit, backups)
static int at91_aic_pm_init(void)
{
backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
if (!backups)
return -ENOMEM;
wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
if (!wakeups) {
kfree(backups);
return -ENOMEM;
}
return 0;
}
static int at91_aic_set_wake(struct irq_data *d, unsigned value)
{
if (unlikely(d->hwirq >= n_irqs))
return -EINVAL;
if (value)
set_bit(d->hwirq, wakeups);
else
clear_bit(d->hwirq, wakeups);
return 0;
}
void at91_irq_suspend(void)
{
at91_aic_write(AT91_AIC_IDCR, *backups);
at91_aic_write(AT91_AIC_IECR, *wakeups);
}
void at91_irq_resume(void)
{
at91_aic_write(AT91_AIC_IDCR, *wakeups);
at91_aic_write(AT91_AIC_IECR, *backups);
}
#else
static inline int at91_aic_pm_init(void)
{
return 0;
}
#define set_backup(bit)
#define clear_backup(bit)
#define at91_aic_set_wake NULL
#endif /* CONFIG_PM */
asmlinkage void __exception_irq_entry
at91_aic_handle_irq(struct pt_regs *regs)
{
u32 irqnr;
u32 irqstat;
irqnr = at91_aic_read(AT91_AIC_IVR);
irqstat = at91_aic_read(AT91_AIC_ISR);
/*
* ISR value is 0 when there is no current interrupt or when there is
* a spurious interrupt
*/
if (!irqstat)
at91_aic_write(AT91_AIC_EOICR, 0);
else
handle_IRQ(irqnr, regs);
}
static void at91_aic_mask_irq(struct irq_data *d)
{
/* Disable interrupt on AIC */
at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
/* Update ISR cache */
clear_backup(d->hwirq);
}
static void at91_aic_unmask_irq(struct irq_data *d)
{
/* Enable interrupt on AIC */
at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
/* Update ISR cache */
set_backup(d->hwirq);
}
static void at91_aic_eoi(struct irq_data *d)
{
/*
* Mark end-of-interrupt on AIC, the controller doesn't care about
* the value written. Moreover it's a write-only register.
*/
at91_aic_write(AT91_AIC_EOICR, 0);
}
static unsigned long *at91_extern_irq;
u32 at91_get_extern_irq(void)
{
if (!at91_extern_irq)
return 0;
return *at91_extern_irq;
}
#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq)
static int at91_aic_compute_srctype(struct irq_data *d, unsigned type)
{
int srctype;
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
srctype = AT91_AIC_SRCTYPE_HIGH;
break;
case IRQ_TYPE_EDGE_RISING:
srctype = AT91_AIC_SRCTYPE_RISING;
break;
case IRQ_TYPE_LEVEL_LOW:
if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_LOW;
else
srctype = -EINVAL;
break;
case IRQ_TYPE_EDGE_FALLING:
if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_FALLING;
else
srctype = -EINVAL;
break;
default:
srctype = -EINVAL;
}
return srctype;
}
static int at91_aic_set_type(struct irq_data *d, unsigned type)
{
unsigned int smr;
int srctype;
srctype = at91_aic_compute_srctype(d, type);
if (srctype < 0)
return srctype;
smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
return 0;
}
static struct irq_chip at91_aic_chip = {
.name = "AIC",
.irq_mask = at91_aic_mask_irq,
.irq_unmask = at91_aic_unmask_irq,
.irq_set_type = at91_aic_set_type,
.irq_set_wake = at91_aic_set_wake,
.irq_eoi = at91_aic_eoi,
};
static void __init at91_aic_hw_init(unsigned int spu_vector)
{
int i;
/*
* Perform 8 End Of Interrupt Command to make sure AIC
* will not Lock out nIRQ
*/
for (i = 0; i < 8; i++)
at91_aic_write(AT91_AIC_EOICR, 0);
/*
* Spurious Interrupt ID in Spurious Vector Register.
* When there is no current interrupt, the IRQ Vector Register
* reads the value stored in AIC_SPU
*/
at91_aic_write(AT91_AIC_SPU, spu_vector);
/* No debugging in AIC: Debug (Protect) Control Register */
at91_aic_write(AT91_AIC_DCR, 0);
/* Disable and clear all interrupts initially */
at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
}
/*
* Initialize the AIC interrupt controller.
*/
void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
{
unsigned int i;
int irq_base;
at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
* sizeof(*at91_extern_irq), GFP_KERNEL);
if (at91_aic_pm_init() || at91_extern_irq == NULL)
panic("Unable to allocate bit maps\n");
*at91_extern_irq = ext_irq_mask;
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Unable to ioremap AIC registers\n");
/* Add irq domain for AIC */
irq_base = irq_alloc_descs(-1, 0, n_irqs, 0);
if (irq_base < 0) {
WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
irq_base = 0;
}
at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs,
irq_base, 0,
&irq_domain_simple_ops, NULL);
if (!at91_aic_domain)
panic("Unable to add AIC irq domain\n");
irq_set_default_host(at91_aic_domain);
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
for (i = 0; i < n_irqs; i++) {
/* Put hardware irq number in Source Vector Register: */
at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i);
/* Active Low interrupt, with the specified priority */
at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
at91_aic_hw_init(n_irqs);
}
arch/arm/mach-at91/pm.c
浏览文件 @ 1ccdde05
......@@ -29,7 +29,6 @@
#include <mach/cpu.h>
#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
#include "gpio.h"
......@@ -136,19 +135,6 @@ static int at91_pm_enter(suspend_state_t state)
else
at91_gpio_suspend();
if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) {
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
/* remember all the always-wake irqs */
(at91_pmc_read(AT91_PMC_PCSR)
| (1 << AT91_ID_FIQ)
| (1 << AT91_ID_SYS)
| (at91_get_extern_irq()))
& at91_aic_read(AT91_AIC_IMR),
state);
}
switch (state) {
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
......@@ -212,17 +198,9 @@ static int at91_pm_enter(suspend_state_t state)
goto error;
}
if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
pr_debug("AT91: PM - wakeup %08x\n",
at91_aic_read(AT91_AIC_IPR) &
at91_aic_read(AT91_AIC_IMR));
error:
target_state = PM_SUSPEND_ON;
if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
at91_irq_resume();
if (of_have_populated_dt())
at91_pinctrl_gpio_resume();
else
......
arch/arm/mach-at91/setup.c
浏览文件 @ 1ccdde05
......@@ -49,10 +49,6 @@ void __init at91_init_irq_default(void)
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
if (IS_ENABLED(CONFIG_OLD_IRQ_AT91))
at91_aic_init(priority, at91_boot_soc.extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或