USB: fix up EHCI startup synchronization

A recent patch added software synchronization during EHCI startup,
so ports aren't switched away from the companion controllers after
resets have started.  This patch adds a short delay letting hardware
finish that port switching before any new resets begin ... so both
ends of that hardware race window are closed.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Dave Miller <davem@davemloft.net>
Cc: Dely Sy <dely.l.sy@intel.com>
Cc: stable <stable@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ehci-hcd.c

@@ -575,12 +575,15 @@ static int ehci_run (struct usb_hcd *hcd)
 	 * from the companions to the EHCI controller.  If any of the
 	 * companions are in the middle of a port reset at the time, it
 	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
-	 * guarantees that no resets are in progress.
+	 * guarantees that no resets are in progress.  After we set CF,
+	 * a short delay lets the hardware catch up; new resets shouldn't
+	 * be started before the port switching actions could complete.
 	 */
 	down_write(&ehci_cf_port_reset_rwsem);
 	hcd->state = HC_STATE_RUNNING;
 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+	msleep(5);
 	up_write(&ehci_cf_port_reset_rwsem);
 
 	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));