mwifiex: fix cmd and Tx data timeout issue for PCIe cards

We are sending sleep confirm done interrupt in the middle of
sleep handshake. There is a corner case when Tx done interrupt
is received from firmware during sleep handshake due to which
host and firmware power states go out of sync causing cmd and
Tx data timeout problem.

Hence sleep confirm done interrupt is sent at the end of sleep
handshake to fix the problem.

Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com>
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/mwifiex/pcie.c

@@ -1531,6 +1531,14 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter)
 		if (adapter->ps_state == PS_STATE_SLEEP_CFM) {
 			mwifiex_process_sleep_confirm_resp(adapter, skb->data,
 							   skb->len);
+			mwifiex_pcie_enable_host_int(adapter);
+			if (mwifiex_write_reg(adapter,
+					      PCIE_CPU_INT_EVENT,
+					      CPU_INTR_SLEEP_CFM_DONE)) {
+				dev_warn(adapter->dev,
+					 "Write register failed\n");
+				return -1;
+			}
 			while (reg->sleep_cookie && (count++ < 10) &&
 			       mwifiex_pcie_ok_to_access_hw(adapter))
 				usleep_range(50, 60);
@@ -1999,23 +2007,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
 		adapter->int_status |= pcie_ireg;
 		spin_unlock_irqrestore(&adapter->int_lock, flags);
 
-		if (pcie_ireg & HOST_INTR_CMD_DONE) {
-			if ((adapter->ps_state == PS_STATE_SLEEP_CFM) ||
-			    (adapter->ps_state == PS_STATE_SLEEP)) {
-				mwifiex_pcie_enable_host_int(adapter);
-				if (mwifiex_write_reg(adapter,
-						      PCIE_CPU_INT_EVENT,
-						      CPU_INTR_SLEEP_CFM_DONE)
-						      ) {
-					dev_warn(adapter->dev,
-						 "Write register failed\n");
-					return;
-
-				}
-			}
-		} else if (!adapter->pps_uapsd_mode &&
-			   adapter->ps_state == PS_STATE_SLEEP &&
-			   mwifiex_pcie_ok_to_access_hw(adapter)) {
+		if (!adapter->pps_uapsd_mode &&
+		    adapter->ps_state == PS_STATE_SLEEP &&
+		    mwifiex_pcie_ok_to_access_hw(adapter)) {
 				/* Potentially for PCIe we could get other
 				 * interrupts like shared. Don't change power
 				 * state until cookie is set */