[media] marvell-cam: Right-shift i2c slave ID's in the cafe driver

This makes the cafe i2c implement consistent with the rest of Linux so that
the core can use the same slave ID everywhere.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/marvell-ccic/cafe-driver.c

@@ -84,7 +84,14 @@ struct cafe_camera {
 #define	  TWSIC0_EN	  0x00000001	/* TWSI enable */
 #define	  TWSIC0_MODE	  0x00000002	/* 1 = 16-bit, 0 = 8-bit */
 #define	  TWSIC0_SID	  0x000003fc	/* Slave ID */
-#define	  TWSIC0_SID_SHIFT 2
+/*
+ * Subtle trickery: the slave ID field starts with bit 2.  But the
+ * Linux i2c stack wants to treat the bottommost bit as a separate
+ * read/write bit, which is why slave ID's are usually presented
+ * >>1.  For consistency with that behavior, we shift over three
+ * bits instead of two.
+ */
+#define	  TWSIC0_SID_SHIFT 3
 #define	  TWSIC0_CLKDIV	  0x0007fc00	/* Clock divider */
 #define	  TWSIC0_MASKACK  0x00400000	/* Mask ack from sensor */
 #define	  TWSIC0_OVMAGIC  0x00800000	/* Make it work on OV sensors */

drivers/media/video/marvell-ccic/mcam-core.c

@@ -1549,7 +1549,7 @@ int mccic_register(struct mcam_camera *cam)
 {
 	struct i2c_board_info ov7670_info = {
 		.type = "ov7670",
-		.addr = 0x42,
+		.addr = 0x42 >> 1,
 		.platform_data = &sensor_cfg,
 	};
 	int ret;