提交 195f2c65 编写于 作者: R Robert Elliott 提交者: James Bottomley

hpsa: clean up error handling

refactor error cleanup and shutdown
disable interrupts and pci_disable_device on critical failures
add hpsa_free_cfgtables function
Reviewed-by: NScott Teel <scott.teel@pmcs.com>
Reviewed-by: NKevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Reviewed-by: NHannes Reinecke <hare@Suse.de>
Signed-off-by: NRobert Elliott <elliott@hp.com>
Signed-off-by: NDon Brace <don.brace@pmcs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
上级 cc64c817
......@@ -6495,6 +6495,17 @@ static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
return 0;
}
static void hpsa_free_cfgtables(struct ctlr_info *h)
{
if (h->transtable)
iounmap(h->transtable);
if (h->cfgtable)
iounmap(h->cfgtable);
}
/* Find and map CISS config table and transfer table
+ * several items must be unmapped (freed) later
+ * */
static int hpsa_find_cfgtables(struct ctlr_info *h)
{
u64 cfg_offset;
......@@ -6521,8 +6532,11 @@ static int hpsa_find_cfgtables(struct ctlr_info *h)
h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
cfg_base_addr_index)+cfg_offset+trans_offset,
sizeof(*h->transtable));
if (!h->transtable)
if (!h->transtable) {
dev_err(&h->pdev->dev, "Failed mapping transfer table\n");
hpsa_free_cfgtables(h);
return -ENOMEM;
}
return 0;
}
......@@ -6698,6 +6712,17 @@ static int hpsa_enter_simple_mode(struct ctlr_info *h)
return -ENODEV;
}
/* free items allocated or mapped by hpsa_pci_init */
static void hpsa_free_pci_init(struct ctlr_info *h)
{
hpsa_free_cfgtables(h); /* pci_init 4 */
iounmap(h->vaddr); /* pci_init 3 */
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
pci_release_regions(h->pdev); /* pci_init 2 */
pci_disable_device(h->pdev); /* pci_init 1 */
}
/* several items must be freed later */
static int hpsa_pci_init(struct ctlr_info *h)
{
int prod_index, err;
......@@ -6716,15 +6741,15 @@ static int hpsa_pci_init(struct ctlr_info *h)
err = pci_enable_device(h->pdev);
if (err) {
dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
dev_err(&h->pdev->dev, "failed to enable PCI device\n");
return err;
}
err = pci_request_regions(h->pdev, HPSA);
if (err) {
dev_err(&h->pdev->dev,
"cannot obtain PCI resources, aborting\n");
return err;
"failed to obtain PCI resources\n");
goto clean1; /* pci */
}
pci_set_master(h->pdev);
......@@ -6732,40 +6757,41 @@ static int hpsa_pci_init(struct ctlr_info *h)
hpsa_interrupt_mode(h);
err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
if (err)
goto err_out_free_res;
goto clean2; /* intmode+region, pci */
h->vaddr = remap_pci_mem(h->paddr, 0x250);
if (!h->vaddr) {
dev_err(&h->pdev->dev, "failed to remap PCI mem\n");
err = -ENOMEM;
goto err_out_free_res;
goto clean2; /* intmode+region, pci */
}
err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
if (err)
goto err_out_free_res;
goto clean3; /* vaddr, intmode+region, pci */
err = hpsa_find_cfgtables(h);
if (err)
goto err_out_free_res;
goto clean3; /* vaddr, intmode+region, pci */
hpsa_find_board_params(h);
if (!hpsa_CISS_signature_present(h)) {
err = -ENODEV;
goto err_out_free_res;
goto clean4; /* cfgtables, vaddr, intmode+region, pci */
}
hpsa_set_driver_support_bits(h);
hpsa_p600_dma_prefetch_quirk(h);
err = hpsa_enter_simple_mode(h);
if (err)
goto err_out_free_res;
goto clean4; /* cfgtables, vaddr, intmode+region, pci */
return 0;
err_out_free_res:
if (h->transtable)
iounmap(h->transtable);
if (h->cfgtable)
iounmap(h->cfgtable);
if (h->vaddr)
iounmap(h->vaddr);
pci_disable_device(h->pdev);
clean4: /* cfgtables, vaddr, intmode+region, pci */
hpsa_free_cfgtables(h);
clean3: /* vaddr, intmode+region, pci */
iounmap(h->vaddr);
clean2: /* intmode+region, pci */
hpsa_disable_interrupt_mode(h);
pci_release_regions(h->pdev);
clean1: /* pci */
pci_disable_device(h->pdev);
return err;
}
......@@ -6974,8 +7000,9 @@ static int hpsa_request_irqs(struct ctlr_info *h,
}
}
if (rc) {
dev_err(&h->pdev->dev, "unable to get irq %d for %s\n",
dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
h->intr[h->intr_mode], h->devname);
hpsa_free_irqs(h);
return -ENODEV;
}
return 0;
......@@ -7027,15 +7054,11 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
kfree(h->ioaccel1_blockFetchTable);
kfree(h->blockFetchTable);
hpsa_free_reply_queues(h);
if (h->vaddr)
iounmap(h->vaddr);
if (h->transtable)
iounmap(h->transtable);
if (h->cfgtable)
iounmap(h->cfgtable);
hpsa_disable_interrupt_mode(h);
hpsa_free_cfgtables(h); /* pci_init 4 */
iounmap(h->vaddr); /* pci_init 3 */
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
pci_disable_device(h->pdev);
pci_release_regions(h->pdev);
pci_release_regions(h->pdev); /* pci_init 2 */
kfree(h);
}
......@@ -7359,7 +7382,7 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dac = 0;
} else {
dev_err(&pdev->dev, "no suitable DMA available\n");
goto clean1;
goto clean2;
}
}
......@@ -7470,6 +7493,7 @@ static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
clean2_and_free_irqs:
hpsa_free_irqs(h);
clean2:
hpsa_free_pci_init(h);
clean1:
if (h->resubmit_wq)
destroy_workqueue(h->resubmit_wq);
......@@ -7561,12 +7585,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
destroy_workqueue(h->resubmit_wq);
hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */
/* includes hpsa_free_irqs and hpsa_disable_interrupt_mode */
/* includes hpsa_free_irqs */
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
hpsa_shutdown(pdev);
iounmap(h->vaddr);
iounmap(h->transtable);
iounmap(h->cfgtable);
hpsa_free_device_info(h);
hpsa_free_sg_chain_blocks(h);
pci_free_consistent(h->pdev,
......@@ -7581,8 +7603,10 @@ static void hpsa_remove_one(struct pci_dev *pdev)
kfree(h->ioaccel1_blockFetchTable);
kfree(h->ioaccel2_blockFetchTable);
kfree(h->hba_inquiry_data);
pci_disable_device(pdev);
pci_release_regions(pdev);
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
hpsa_free_pci_init(h);
free_percpu(h->lockup_detected);
kfree(h);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册