[MTD] Unlock NOR flash automatically where necessary

Introduce the MTD_STUPID_LOCK flag which indicates that the flash chip is
always locked after power-up, so all sectors need to be unlocked before it
is usable.

If this flag is set, and the chip provides an unlock() operation,
mtd_add_device will unlock the whole MTD device if it's writeable.  This
means that non-writeable partitions will stay locked.

Set MTD_STUPID_LOCK in fixup_use_atmel_lock() so that these chips will work
as expected.
Signed-off-by: NHåvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -212,6 +212,7 @@ static void fixup_use_atmel_lock(struct mtd_info *mtd, void *param)
 {
 	mtd->lock = cfi_atmel_lock;
 	mtd->unlock = cfi_atmel_unlock;
+	mtd->flags |= MTD_STUPID_LOCK;
 }
 
 static struct cfi_fixup cfi_fixup_table[] = {

drivers/mtd/mtdcore.c

@@ -57,6 +57,16 @@ int add_mtd_device(struct mtd_info *mtd)
 			mtd->index = i;
 			mtd->usecount = 0;
 
+			/* Some chips always power up locked. Unlock them now */
+			if ((mtd->flags & MTD_WRITEABLE)
+			    && (mtd->flags & MTD_STUPID_LOCK) && mtd->unlock) {
+				if (mtd->unlock(mtd, 0, mtd->size))
+					printk(KERN_WARNING
+					       "%s: unlock failed, "
+					       "writes may not work\n",
+					       mtd->name);
+			}
+
 			DEBUG(0, "mtd: Giving out device %d to %s\n",i, mtd->name);
 			/* No need to get a refcount on the module containing
 			   the notifier, since we hold the mtd_table_mutex */

include/mtd/mtd-abi.h

@@ -34,6 +34,7 @@ struct mtd_oob_buf {
 #define MTD_WRITEABLE		0x400	/* Device is writeable */
 #define MTD_BIT_WRITEABLE	0x800	/* Single bits can be flipped */
 #define MTD_NO_ERASE		0x1000	/* No erase necessary */
+#define MTD_STUPID_LOCK		0x2000	/* Always locked after reset */
 
 // Some common devices / combinations of capabilities
 #define MTD_CAP_ROM		0