Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 18539966 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

上级 108dff7d 16f05be7
隐藏空白更改
内联 并排
Showing with 127 addition and 63 deletion
drivers/usb/host/pci-quirks.c
浏览文件 @ 18539966
...@@ -191,8 +191,9 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) ...@@ -191,8 +191,9 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
} }
if (wait_time <= 0) if (wait_time <= 0)
printk(KERN_WARNING "%s %s: BIOS handoff " printk(KERN_WARNING "%s %s: BIOS handoff "
"failed (BIOS bug ?)\n", "failed (BIOS bug ?) %08x\n",
pdev->dev.bus_id, "OHCI"); pdev->dev.bus_id, "OHCI",
readl(base + OHCI_CONTROL));
/* reset controller, preserving RWC */ /* reset controller, preserving RWC */
writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL); writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
...@@ -243,6 +244,12 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) ...@@ -243,6 +244,12 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
pr_debug("%s %s: BIOS handoff\n", pr_debug("%s %s: BIOS handoff\n",
pdev->dev.bus_id, "EHCI"); pdev->dev.bus_id, "EHCI");
#if 0
/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
* but that seems dubious in general (the BIOS left it off intentionally)
* and is known to prevent some systems from booting. so we won't do this
* unless maybe we can determine when we're on a system that needs SMI forced.
*/
/* BIOS workaround (?): be sure the /* BIOS workaround (?): be sure the
* pre-Linux code receives the SMI * pre-Linux code receives the SMI
*/ */
...@@ -252,6 +259,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) ...@@ -252,6 +259,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
pci_write_config_dword(pdev, pci_write_config_dword(pdev,
offset + EHCI_USBLEGCTLSTS, offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE); val | EHCI_USBLEGCTLSTS_SOOE);
#endif
} }
/* always say Linux will own the hardware /* always say Linux will own the hardware
...@@ -274,8 +282,8 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) ...@@ -274,8 +282,8 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
* it down, and hope nothing goes too wrong * it down, and hope nothing goes too wrong
*/ */
printk(KERN_WARNING "%s %s: BIOS handoff " printk(KERN_WARNING "%s %s: BIOS handoff "
"failed (BIOS bug ?)\n", "failed (BIOS bug ?) %08x\n",
pdev->dev.bus_id, "EHCI"); pdev->dev.bus_id, "EHCI", cap);
pci_write_config_byte(pdev, offset + 2, 0); pci_write_config_byte(pdev, offset + 2, 0);
} }
......
drivers/usb/host/sl811_cs.c
浏览文件 @ 18539966
...@@ -101,7 +101,7 @@ static struct resource resources[] = { ...@@ -101,7 +101,7 @@ static struct resource resources[] = {
}, },
}; };
extern struct device_driver sl811h_driver; extern struct platform_driver sl811h_driver;
static struct platform_device platform_dev = { static struct platform_device platform_dev = {
.id = -1, .id = -1,
...@@ -132,7 +132,7 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) ...@@ -132,7 +132,7 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
* initialized already because of the link order dependency created * initialized already because of the link order dependency created
* by referencing "sl811h_driver". * by referencing "sl811h_driver".
*/ */
platform_dev.name = sl811h_driver.name; platform_dev.name = sl811h_driver.driver.name;
return platform_device_register(&platform_dev); return platform_device_register(&platform_dev);
} }
......
drivers/usb/input/hid-core.c
浏览文件 @ 18539966
...@@ -1435,17 +1435,20 @@ void hid_init_reports(struct hid_device *hid) ...@@ -1435,17 +1435,20 @@ void hid_init_reports(struct hid_device *hid)
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
#define USB_VENDOR_ID_LD 0x0f11 #define USB_VENDOR_ID_LD 0x0f11
#define USB_DEVICE_ID_CASSY 0x1000 #define USB_DEVICE_ID_LD_CASSY 0x1000
#define USB_DEVICE_ID_POCKETCASSY 0x1010 #define USB_DEVICE_ID_LD_POCKETCASSY 0x1010
#define USB_DEVICE_ID_MOBILECASSY 0x1020 #define USB_DEVICE_ID_LD_MOBILECASSY 0x1020
#define USB_DEVICE_ID_JWM 0x1080 #define USB_DEVICE_ID_LD_JWM 0x1080
#define USB_DEVICE_ID_DMMP 0x1081 #define USB_DEVICE_ID_LD_DMMP 0x1081
#define USB_DEVICE_ID_UMIP 0x1090 #define USB_DEVICE_ID_LD_UMIP 0x1090
#define USB_DEVICE_ID_VIDEOCOM 0x1200 #define USB_DEVICE_ID_LD_XRAY1 0x1100
#define USB_DEVICE_ID_COM3LAB 0x2000 #define USB_DEVICE_ID_LD_XRAY2 0x1101
#define USB_DEVICE_ID_TELEPORT 0x2010 #define USB_DEVICE_ID_LD_VIDEOCOM 0x1200
#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 #define USB_DEVICE_ID_LD_COM3LAB 0x2000
#define USB_DEVICE_ID_POWERCONTROL 0x2030 #define USB_DEVICE_ID_LD_TELEPORT 0x2010
#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030
#define USB_DEVICE_ID_LD_MACHINETEST 0x2040
#define USB_VENDOR_ID_APPLE 0x05ac #define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304 #define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304
...@@ -1491,17 +1494,20 @@ static const struct hid_blacklist { ...@@ -1491,17 +1494,20 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
......
drivers/usb/misc/Kconfig
浏览文件 @ 18539966
...@@ -141,7 +141,7 @@ source "drivers/usb/misc/sisusbvga/Kconfig" ...@@ -141,7 +141,7 @@ source "drivers/usb/misc/sisusbvga/Kconfig"
config USB_LD config USB_LD
tristate "USB LD driver" tristate "USB LD driver"
depends on USB && EXPERIMENTAL depends on USB
help help
This driver is for generic USB devices that use interrupt transfers, This driver is for generic USB devices that use interrupt transfers,
like LD Didactic's USB devices. like LD Didactic's USB devices.
......
drivers/usb/misc/ldusb.c
浏览文件 @ 18539966
...@@ -24,6 +24,7 @@ ...@@ -24,6 +24,7 @@
* V0.1 (mh) Initial version * V0.1 (mh) Initial version
* V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint) * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint)
* V0.12 (mh) Added kmalloc check for string buffer * V0.12 (mh) Added kmalloc check for string buffer
* V0.13 (mh) Added support for LD X-Ray and Machine Test System
*/ */
#include <linux/config.h> #include <linux/config.h>
...@@ -40,17 +41,20 @@ ...@@ -40,17 +41,20 @@
/* Define these values to match your devices */ /* Define these values to match your devices */
#define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */ #define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */
#define USB_DEVICE_ID_CASSY 0x1000 /* USB Product ID for all CASSY-S modules */ #define USB_DEVICE_ID_LD_CASSY 0x1000 /* USB Product ID of CASSY-S */
#define USB_DEVICE_ID_POCKETCASSY 0x1010 /* USB Product ID for Pocket-CASSY */ #define USB_DEVICE_ID_LD_POCKETCASSY 0x1010 /* USB Product ID of Pocket-CASSY */
#define USB_DEVICE_ID_MOBILECASSY 0x1020 /* USB Product ID for Mobile-CASSY */ #define USB_DEVICE_ID_LD_MOBILECASSY 0x1020 /* USB Product ID of Mobile-CASSY */
#define USB_DEVICE_ID_JWM 0x1080 /* USB Product ID for Joule and Wattmeter */ #define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */
#define USB_DEVICE_ID_DMMP 0x1081 /* USB Product ID for Digital Multimeter P (reserved) */ #define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */
#define USB_DEVICE_ID_UMIP 0x1090 /* USB Product ID for UMI P */ #define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */
#define USB_DEVICE_ID_VIDEOCOM 0x1200 /* USB Product ID for VideoCom */ #define USB_DEVICE_ID_LD_XRAY1 0x1100 /* USB Product ID of X-Ray Apparatus */
#define USB_DEVICE_ID_COM3LAB 0x2000 /* USB Product ID for COM3LAB */ #define USB_DEVICE_ID_LD_XRAY2 0x1101 /* USB Product ID of X-Ray Apparatus */
#define USB_DEVICE_ID_TELEPORT 0x2010 /* USB Product ID for Terminal Adapter */ #define USB_DEVICE_ID_LD_VIDEOCOM 0x1200 /* USB Product ID of VideoCom */
#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 /* USB Product ID for Network Analyser */ #define USB_DEVICE_ID_LD_COM3LAB 0x2000 /* USB Product ID of COM3LAB */
#define USB_DEVICE_ID_POWERCONTROL 0x2030 /* USB Product ID for Controlling device for Power Electronics */ #define USB_DEVICE_ID_LD_TELEPORT 0x2010 /* USB Product ID of Terminal Adapter */
#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020 /* USB Product ID of Network Analyser */
#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030 /* USB Product ID of Converter Control Unit */
#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */
#define USB_VENDOR_ID_VERNIER 0x08f7 #define USB_VENDOR_ID_VERNIER 0x08f7
#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
...@@ -67,17 +71,20 @@ ...@@ -67,17 +71,20 @@
/* table of devices that work with this driver */ /* table of devices that work with this driver */
static struct usb_device_id ld_usb_table [] = { static struct usb_device_id ld_usb_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
...@@ -85,7 +92,7 @@ static struct usb_device_id ld_usb_table [] = { ...@@ -85,7 +92,7 @@ static struct usb_device_id ld_usb_table [] = {
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
MODULE_DEVICE_TABLE(usb, ld_usb_table); MODULE_DEVICE_TABLE(usb, ld_usb_table);
MODULE_VERSION("V0.12"); MODULE_VERSION("V0.13");
MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>"); MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
MODULE_DESCRIPTION("LD USB Driver"); MODULE_DESCRIPTION("LD USB Driver");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
...@@ -632,8 +639,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * ...@@ -632,8 +639,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
/* workaround for early firmware versions on fast computers */ /* workaround for early firmware versions on fast computers */
if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) && if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_CASSY) || ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) ||
(le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) && (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
(le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) { (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
buffer = kmalloc(256, GFP_KERNEL); buffer = kmalloc(256, GFP_KERNEL);
if (buffer == NULL) { if (buffer == NULL) {
......
drivers/usb/serial/pl2303.c
浏览文件 @ 18539966
...@@ -73,9 +73,10 @@ static struct usb_device_id id_table [] = { ...@@ -73,9 +73,10 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) }, { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) }, { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) }, { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ } /* Terminating entry */ { } /* Terminating entry */
}; };
......
drivers/usb/serial/pl2303.h
浏览文件 @ 18539966
...@@ -71,3 +71,7 @@ ...@@ -71,3 +71,7 @@
#define SAGEM_VENDOR_ID 0x079b #define SAGEM_VENDOR_ID 0x079b
#define SAGEM_PRODUCT_ID 0x0027 #define SAGEM_PRODUCT_ID 0x0027
/* Leadtek GPS 9531 (ID 0413:2101) */
#define LEADTEK_VENDOR_ID 0x0413
#define LEADTEK_9531_PRODUCT_ID 0x2101
drivers/usb/storage/unusual_devs.h
浏览文件 @ 18539966
...@@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, ...@@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
US_SC_DEVICE, US_PR_DEVICE, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ), US_FL_FIX_INQUIRY ),
/* Reported by Christian Leber <christian@leber.de> */
UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
"TrekStor",
"i.Beat 115 2.0",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
/* Reported by Stefan Werner <dustbln@gmx.de> */ /* Reported by Stefan Werner <dustbln@gmx.de> */
UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
"TrekStor", "TrekStor",
...@@ -127,6 +134,14 @@ UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, ...@@ -127,6 +134,14 @@ UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif #endif
/* Patch submitted by Daniel Drake <dsd@gentoo.org>
* Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
"Neuros Audio",
"USB 2.0 HD 2.5",
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* /*
* Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
* The key does not actually break, but it returns zero sense which * The key does not actually break, but it returns zero sense which
...@@ -137,13 +152,16 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, ...@@ -137,13 +152,16 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100,
"USB Mass Storage Device", "USB Mass Storage Device",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
/* Patch submitted by Daniel Drake <dsd@gentoo.org> /*
* Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ * Bohdan Linda <bohdan.linda@gmail.com>
UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, * 1GB USB sticks MyFlash High Speed. I have restricted
"Neuros Audio", * the revision to my model only
"USB 2.0 HD 2.5", */
US_SC_DEVICE, US_PR_BULK, NULL, UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
US_FL_NEED_OVERRIDE ), "USB 2.0",
"Flash Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NOT_LOCKABLE ),
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio", "Rio",
...@@ -946,6 +964,12 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, ...@@ -946,6 +964,12 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
US_SC_DEVICE, US_PR_DEVICE, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_BULK32), US_FL_BULK32),
/* Submitted by Jan De Luyck <lkml@kcore.org> */
UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
"CITIZEN",
"X1DE-USB",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
/* Entry needed for flags. Moreover, all devices with this ID use /* Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead. * bulk-only transport, but _some_ falsely report Control/Bulk instead.
...@@ -1085,6 +1109,13 @@ UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, ...@@ -1085,6 +1109,13 @@ UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012,
US_SC_DEVICE, US_PR_DEVICE, NULL, US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ), US_FL_IGNORE_RESIDUE ),
/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
"Cowon Systems",
"iAUDIO M5",
US_SC_DEVICE, US_PR_BULK, NULL,
0 ),
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
"USB", "USB",
...@@ -1162,6 +1193,13 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, ...@@ -1162,6 +1193,13 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
US_FL_SINGLE_LUN), US_FL_SINGLE_LUN),
#endif #endif
/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
"DataStor",
"USB4500 FW1.04",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
/* Control/Bulk transport for all SubClass values */ /* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或