i2c: move acpi code back into the core

Commit 5d98e61d ("I2C/ACPI: Add i2c ACPI operation region support")
renamed the i2c-core module. This may cause regressions for
distributions, so put the ACPI code back into the core.
Reported-by: NJean Delvare <jdelvare@suse.de>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Tested-by: NLan Tianyu <tianyu.lan@intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>

MAINTAINERS

@@ -4477,7 +4477,6 @@ M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 L:	linux-i2c@vger.kernel.org
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
-F:	drivers/i2c/i2c-acpi.c
 
 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <jdelvare@suse.de>

drivers/i2c/Makefile

@@ -2,11 +2,8 @@
 # Makefile for the i2c core.
 #
 
-i2ccore-y := i2c-core.o
-i2ccore-$(CONFIG_ACPI)	 	+= i2c-acpi.o
-
 obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
-obj-$(CONFIG_I2C)		+= i2ccore.o
+obj-$(CONFIG_I2C)		+= i2c-core.o
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_MUX)		+= i2c-mux.o

drivers/i2c/i2c-acpi.c

-/*
- * I2C ACPI code
- *
- * Copyright (C) 2014 Intel Corp
- *
- * Author: Lan Tianyu <tianyu.lan@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-#define pr_fmt(fmt) "I2C/ACPI : " fmt
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/acpi.h>
-
-struct acpi_i2c_handler_data {
-	struct acpi_connection_info info;
-	struct i2c_adapter *adapter;
-};
-
-struct gsb_buffer {
-	u8	status;
-	u8	len;
-	union {
-		u16	wdata;
-		u8	bdata;
-		u8	data[0];
-	};
-} __packed;
-
-static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
-{
-	struct i2c_board_info *info = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		struct acpi_resource_i2c_serialbus *sb;
-
-		sb = &ares->data.i2c_serial_bus;
-		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-			info->addr = sb->slave_address;
-			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-				info->flags |= I2C_CLIENT_TEN;
-		}
-	} else if (info->irq < 0) {
-		struct resource r;
-
-		if (acpi_dev_resource_interrupt(ares, 0, &r))
-			info->irq = r.start;
-	}
-
-	/* Tell the ACPI core to skip this resource */
-	return 1;
-}
-
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
-				       void *data, void **return_value)
-{
-	struct i2c_adapter *adapter = data;
-	struct list_head resource_list;
-	struct i2c_board_info info;
-	struct acpi_device *adev;
-	int ret;
-
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-	if (acpi_bus_get_status(adev) || !adev->status.present)
-		return AE_OK;
-
-	memset(&info, 0, sizeof(info));
-	info.acpi_node.companion = adev;
-	info.irq = -1;
-
-	INIT_LIST_HEAD(&resource_list);
-	ret = acpi_dev_get_resources(adev, &resource_list,
-				     acpi_i2c_add_resource, &info);
-	acpi_dev_free_resource_list(&resource_list);
-
-	if (ret < 0 || !info.addr)
-		return AE_OK;
-
-	adev->power.flags.ignore_parent = true;
-	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
-	if (!i2c_new_device(adapter, &info)) {
-		adev->power.flags.ignore_parent = false;
-		dev_err(&adapter->dev,
-			"failed to add I2C device %s from ACPI\n",
-			dev_name(&adev->dev));
-	}
-
-	return AE_OK;
-}
-
-/**
- * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
- * @adap: pointer to adapter
- *
- * Enumerate all I2C slave devices behind this adapter by walking the ACPI
- * namespace. When a device is found it will be added to the Linux device
- * model and bound to the corresponding ACPI handle.
- */
-void acpi_i2c_register_devices(struct i2c_adapter *adap)
-{
-	acpi_handle handle;
-	acpi_status status;
-
-	if (!adap->dev.parent)
-		return;
-
-	handle = ACPI_HANDLE(adap->dev.parent);
-	if (!handle)
-		return;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
-				     acpi_i2c_add_device, NULL,
-				     adap, NULL);
-	if (ACPI_FAILURE(status))
-		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
-}
-
-#ifdef CONFIG_ACPI_I2C_OPREGION
-static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
-		u8 cmd, u8 *data, u8 data_len)
-{
-
-	struct i2c_msg msgs[2];
-	int ret;
-	u8 *buffer;
-
-	buffer = kzalloc(data_len, GFP_KERNEL);
-	if (!buffer)
-		return AE_NO_MEMORY;
-
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags;
-	msgs[0].len = 1;
-	msgs[0].buf = &cmd;
-
-	msgs[1].addr = client->addr;
-	msgs[1].flags = client->flags | I2C_M_RD;
-	msgs[1].len = data_len;
-	msgs[1].buf = buffer;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		dev_err(&client->adapter->dev, "i2c read failed\n");
-	else
-		memcpy(data, buffer, data_len);
-
-	kfree(buffer);
-	return ret;
-}
-
-static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
-		u8 cmd, u8 *data, u8 data_len)
-{
-
-	struct i2c_msg msgs[1];
-	u8 *buffer;
-	int ret = AE_OK;
-
-	buffer = kzalloc(data_len + 1, GFP_KERNEL);
-	if (!buffer)
-		return AE_NO_MEMORY;
-
-	buffer[0] = cmd;
-	memcpy(buffer + 1, data, data_len);
-
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags;
-	msgs[0].len = data_len + 1;
-	msgs[0].buf = buffer;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		dev_err(&client->adapter->dev, "i2c write failed\n");
-
-	kfree(buffer);
-	return ret;
-}
-
-static acpi_status
-acpi_i2c_space_handler(u32 function, acpi_physical_address command,
-			u32 bits, u64 *value64,
-			void *handler_context, void *region_context)
-{
-	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
-	struct acpi_i2c_handler_data *data = handler_context;
-	struct acpi_connection_info *info = &data->info;
-	struct acpi_resource_i2c_serialbus *sb;
-	struct i2c_adapter *adapter = data->adapter;
-	struct i2c_client client;
-	struct acpi_resource *ares;
-	u32 accessor_type = function >> 16;
-	u8 action = function & ACPI_IO_MASK;
-	acpi_status ret = AE_OK;
-	int status;
-
-	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
-	if (ACPI_FAILURE(ret))
-		return ret;
-
-	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	sb = &ares->data.i2c_serial_bus;
-	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	memset(&client, 0, sizeof(client));
-	client.adapter = adapter;
-	client.addr = sb->slave_address;
-	client.flags = 0;
-
-	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-		client.flags |= I2C_CLIENT_TEN;
-
-	switch (accessor_type) {
-	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_byte(&client);
-			if (status >= 0) {
-				gsb->bdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_byte(&client, gsb->bdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_byte_data(&client, command);
-			if (status >= 0) {
-				gsb->bdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_byte_data(&client, command,
-					gsb->bdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_WORD:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_word_data(&client, command);
-			if (status >= 0) {
-				gsb->wdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_word_data(&client, command,
-					gsb->wdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_block_data(&client, command,
-					gsb->data);
-			if (status >= 0) {
-				gsb->len = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_block_data(&client, command,
-					gsb->len, gsb->data);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
-		if (action == ACPI_READ) {
-			status = acpi_gsb_i2c_read_bytes(&client, command,
-					gsb->data, info->access_length);
-			if (status > 0)
-				status = 0;
-		} else {
-			status = acpi_gsb_i2c_write_bytes(&client, command,
-					gsb->data, info->access_length);
-		}
-		break;
-
-	default:
-		pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	gsb->status = status;
-
- err:
-	ACPI_FREE(ares);
-	return ret;
-}
-
-
-int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
-{
-	acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
-	struct acpi_i2c_handler_data *data;
-	acpi_status status;
-
-	if (!handle)
-		return -ENODEV;
-
-	data = kzalloc(sizeof(struct acpi_i2c_handler_data),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->adapter = adapter;
-	status = acpi_bus_attach_private_data(handle, (void *)data);
-	if (ACPI_FAILURE(status)) {
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	status = acpi_install_address_space_handler(handle,
-				ACPI_ADR_SPACE_GSBUS,
-				&acpi_i2c_space_handler,
-				NULL,
-				data);
-	if (ACPI_FAILURE(status)) {
-		dev_err(&adapter->dev, "Error installing i2c space handler\n");
-		acpi_bus_detach_private_data(handle);
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
-{
-	acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
-	struct acpi_i2c_handler_data *data;
-	acpi_status status;
-
-	if (!handle)
-		return;
-
-	acpi_remove_address_space_handler(handle,
-				ACPI_ADR_SPACE_GSBUS,
-				&acpi_i2c_space_handler);
-
-	status = acpi_bus_get_private_data(handle, (void **)&data);
-	if (ACPI_SUCCESS(status))
-		kfree(data);
-
-	acpi_bus_detach_private_data(handle);
-}
-#endif

drivers/i2c/i2c-core.c

@@ -27,6 +27,8 @@
    OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
    (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
    (c) 2013  Wolfram Sang <wsa@the-dreams.de>
+   I2C ACPI code Copyright (C) 2014 Intel Corp
+   Author: Lan Tianyu <tianyu.lan@intel.com>
  */
 
 #include <linux/module.h>
@@ -78,6 +80,358 @@ void i2c_transfer_trace_unreg(void)
 	static_key_slow_dec(&i2c_trace_msg);
 }
 
+#if defined(CONFIG_ACPI)
+struct acpi_i2c_handler_data {
+	struct acpi_connection_info info;
+	struct i2c_adapter *adapter;
+};
+
+struct gsb_buffer {
+	u8	status;
+	u8	len;
+	union {
+		u16	wdata;
+		u8	bdata;
+		u8	data[0];
+	};
+} __packed;
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.companion = adev;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	adev->power.flags.ignore_parent = true;
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		adev->power.flags.ignore_parent = false;
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	if (!adap->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+
+#else /* CONFIG_ACPI */
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[2];
+	int ret;
+	u8 *buffer;
+
+	buffer = kzalloc(data_len, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = client->flags | I2C_M_RD;
+	msgs[1].len = data_len;
+	msgs[1].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c read failed\n");
+	else
+		memcpy(data, buffer, data_len);
+
+	kfree(buffer);
+	return ret;
+}
+
+static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[1];
+	u8 *buffer;
+	int ret = AE_OK;
+
+	buffer = kzalloc(data_len + 1, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	buffer[0] = cmd;
+	memcpy(buffer + 1, data, data_len);
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = data_len + 1;
+	msgs[0].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c write failed\n");
+
+	kfree(buffer);
+	return ret;
+}
+
+static acpi_status
+acpi_i2c_space_handler(u32 function, acpi_physical_address command,
+			u32 bits, u64 *value64,
+			void *handler_context, void *region_context)
+{
+	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+	struct acpi_i2c_handler_data *data = handler_context;
+	struct acpi_connection_info *info = &data->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	struct i2c_adapter *adapter = data->adapter;
+	struct i2c_client client;
+	struct acpi_resource *ares;
+	u32 accessor_type = function >> 16;
+	u8 action = function & ACPI_IO_MASK;
+	acpi_status ret = AE_OK;
+	int status;
+
+	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+	if (ACPI_FAILURE(ret))
+		return ret;
+
+	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	memset(&client, 0, sizeof(client));
+	client.adapter = adapter;
+	client.addr = sb->slave_address;
+	client.flags = 0;
+
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		client.flags |= I2C_CLIENT_TEN;
+
+	switch (accessor_type) {
+	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte(&client);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte(&client, gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte_data(&client, command);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte_data(&client, command,
+					gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_WORD:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_word_data(&client, command);
+			if (status >= 0) {
+				gsb->wdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_word_data(&client, command,
+					gsb->wdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_block_data(&client, command,
+					gsb->data);
+			if (status >= 0) {
+				gsb->len = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_block_data(&client, command,
+					gsb->len, gsb->data);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
+		if (action == ACPI_READ) {
+			status = acpi_gsb_i2c_read_bytes(&client, command,
+					gsb->data, info->access_length);
+			if (status > 0)
+				status = 0;
+		} else {
+			status = acpi_gsb_i2c_write_bytes(&client, command,
+					gsb->data, info->access_length);
+		}
+		break;
+
+	default:
+		pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	gsb->status = status;
+
+ err:
+	ACPI_FREE(ares);
+	return ret;
+}
+
+
+static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
+	struct acpi_i2c_handler_data *data;
+	acpi_status status;
+
+	if (!handle)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct acpi_i2c_handler_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->adapter = adapter;
+	status = acpi_bus_attach_private_data(handle, (void *)data);
+	if (ACPI_FAILURE(status)) {
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	status = acpi_install_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&acpi_i2c_space_handler,
+				NULL,
+				data);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&adapter->dev, "Error installing i2c space handler\n");
+		acpi_bus_detach_private_data(handle);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
+	struct acpi_i2c_handler_data *data;
+	acpi_status status;
+
+	if (!handle)
+		return;
+
+	acpi_remove_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&acpi_i2c_space_handler);
+
+	status = acpi_bus_get_private_data(handle, (void **)&data);
+	if (ACPI_SUCCESS(status))
+		kfree(data);
+
+	acpi_bus_detach_private_data(handle);
+}
+#else /* CONFIG_ACPI_I2C_OPREGION */
+static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+{ }
+
+static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+{ return 0; }
+#endif /* CONFIG_ACPI_I2C_OPREGION */
+
 /* ------------------------------------------------------------------------- */
 
 static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,

include/linux/i2c.h

@@ -577,20 +577,4 @@ static inline struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node
 }
 #endif /* CONFIG_OF */
 
-#ifdef CONFIG_ACPI
-void acpi_i2c_register_devices(struct i2c_adapter *adap);
-#else
-static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
-#endif /* CONFIG_ACPI */
-
-#ifdef CONFIG_ACPI_I2C_OPREGION
-int acpi_i2c_install_space_handler(struct i2c_adapter *adapter);
-void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter);
-#else
-static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
-{ }
-static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
-{ return 0; }
-#endif /* CONFIG_ACPI_I2C_OPREGION */
-
 #endif /* _LINUX_I2C_H */