Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 178dd0cd 编写于 作者: P Paul Mundt
浏览文件
操作

sh: Add support for SH7723 CPU subtype. 

This adds basic support for the SH7723 MobileR2 CPU.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 47aa8f49
隐藏空白更改
内联 并排
Showing with 389 addition and 32 deletion
arch/sh/Kconfig
浏览文件 @ 178dd0cd
......@@ -276,6 +276,15 @@ config CPU_SUBTYPE_SH4_202
# SH-4A Processor Support
config CPU_SUBTYPE_SH7723
bool "Support SH7723 processor"
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
help
Select SH7723 if you have an SH-MobileR2 CPU.
config CPU_SUBTYPE_SH7763
bool "Support SH7763 processor"
select CPU_SH4A
......@@ -600,7 +609,7 @@ config SH_PCLK_FREQ
default "27000000" if CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
default "32000000" if CPU_SUBTYPE_SH7722
default "33333333" if CPU_SUBTYPE_SH7770 || \
default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
......
arch/sh/kernel/cpu/sh4/probe.c
浏览文件 @ 178dd0cd
......@@ -126,17 +126,22 @@ int __init detect_cpu_and_cache_system(void)
CPU_HAS_LLSC;
break;
case 0x3008:
if (prr == 0xa0 || prr == 0xa1) {
boot_cpu_data.type = CPU_SH7722;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
else if (prr == 0x70) {
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
switch (prr) {
case 0x50:
boot_cpu_data.type = CPU_SH7723;
boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
break;
case 0x70:
boot_cpu_data.type = CPU_SH7366;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
break;
case 0xa0:
case 0xa1:
boot_cpu_data.type = CPU_SH7722;
break;
}
break;
case 0x4000: /* 1st cut */
......
arch/sh/kernel/cpu/sh4a/Makefile
浏览文件 @ 178dd0cd
......@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
......@@ -22,6 +23,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
......
arch/sh/kernel/cpu/sh4a/setup-sh7723.c 0 → 100644
浏览文件 @ 178dd0cd
/*
* SH7723 Setup
*
* Copyright (C) 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/mm.h>
#include <linux/serial_sci.h>
#include <asm/mmzone.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.irqs = { 56, 56, 56, 56 },
},{
.mapbase = 0xa4e40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.irqs = { 88, 88, 88, 88 },
},{
.mapbase = 0xa4e50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.irqs = { 109, 109, 109, 109 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa465fec0,
.end = 0xa465fec0 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 69,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 70,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 68,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static struct platform_device *sh7723_devices[] __initdata = {
&sci_device,
&rtc_device,
};
static int __init sh7723_devices_setup(void)
{
return platform_add_devices(sh7723_devices,
ARRAY_SIZE(sh7723_devices));
}
__initcall(sh7723_devices_setup);
enum {
UNUSED=0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
HUDI,
DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
_2DG_TRI,_2DG_INI,_2DG_CEI,
DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
SCIFA_SCIFA0,
VPU_VPUI,
TPU_TPUI,
ADC_ADI,
USB_USI0,
RTC_ATI,RTC_PRI,RTC_CUI,
DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
KEYSC_KEYI,
SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
MSIOF_MSIOFI0,MSIOF_MSIOFI1,
SCIFA_SCIFA1,
FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2,
CMT_CMTI,
TSIF_TSIFI,
SIU_SIUI,
SCIFA_SCIFA2,
TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
IRDA_IRDAI,
ATAPI_ATAPII,
SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2,
VEU2H1_VEU2HI,
LCDC_LCDCI,
TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
/* interrupt groups */
DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
SDHI1, RTC, DMAC1B, SDHI0,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
INTC_VECT(DMAC1A_DEI0,0x700),
INTC_VECT(DMAC1A_DEI1,0x720),
INTC_VECT(DMAC1A_DEI2,0x740),
INTC_VECT(DMAC1A_DEI3,0x760),
INTC_VECT(_2DG_TRI, 0x780),
INTC_VECT(_2DG_INI, 0x7A0),
INTC_VECT(_2DG_CEI, 0x7C0),
INTC_VECT(DMAC0A_DEI0,0x800),
INTC_VECT(DMAC0A_DEI1,0x820),
INTC_VECT(DMAC0A_DEI2,0x840),
INTC_VECT(DMAC0A_DEI3,0x860),
INTC_VECT(VIO_CEUI,0x880),
INTC_VECT(VIO_BEUI,0x8A0),
INTC_VECT(VIO_VEU2HI,0x8C0),
INTC_VECT(VIO_VOUI,0x8E0),
INTC_VECT(SCIFA_SCIFA0,0x900),
INTC_VECT(VPU_VPUI,0x920),
INTC_VECT(TPU_TPUI,0x9A0),
INTC_VECT(ADC_ADI,0x9E0),
INTC_VECT(USB_USI0,0xA20),
INTC_VECT(RTC_ATI,0xA80),
INTC_VECT(RTC_PRI,0xAA0),
INTC_VECT(RTC_CUI,0xAC0),
INTC_VECT(DMAC1B_DEI4,0xB00),
INTC_VECT(DMAC1B_DEI5,0xB20),
INTC_VECT(DMAC1B_DADERR,0xB40),
INTC_VECT(DMAC0B_DEI4,0xB80),
INTC_VECT(DMAC0B_DEI5,0xBA0),
INTC_VECT(DMAC0B_DADERR,0xBC0),
INTC_VECT(KEYSC_KEYI,0xBE0),
INTC_VECT(SCIF_SCIF0,0xC00),
INTC_VECT(SCIF_SCIF1,0xC20),
INTC_VECT(SCIF_SCIF2,0xC40),
INTC_VECT(MSIOF_MSIOFI0,0xC80),
INTC_VECT(MSIOF_MSIOFI1,0xCA0),
INTC_VECT(SCIFA_SCIFA1,0xD00),
INTC_VECT(FLCTL_FLSTEI,0xD80),
INTC_VECT(FLCTL_FLTENDI,0xDA0),
INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
INTC_VECT(I2C_ALI,0xE00),
INTC_VECT(I2C_TACKI,0xE20),
INTC_VECT(I2C_WAITI,0xE40),
INTC_VECT(I2C_DTEI,0xE60),
INTC_VECT(SDHI0_SDHII0,0xE80),
INTC_VECT(SDHI0_SDHII1,0xEA0),
INTC_VECT(SDHI0_SDHII2,0xEC0),
INTC_VECT(CMT_CMTI,0xF00),
INTC_VECT(TSIF_TSIFI,0xF20),
INTC_VECT(SIU_SIUI,0xF80),
INTC_VECT(SCIFA_SCIFA2,0xFA0),
INTC_VECT(TMU0_TUNI0,0x400),
INTC_VECT(TMU0_TUNI1,0x420),
INTC_VECT(TMU0_TUNI2,0x440),
INTC_VECT(IRDA_IRDAI,0x480),
INTC_VECT(ATAPI_ATAPII,0x4A0),
INTC_VECT(SDHI1_SDHII0,0x4E0),
INTC_VECT(SDHI1_SDHII1,0x500),
INTC_VECT(SDHI1_SDHII2,0x520),
INTC_VECT(VEU2H1_VEU2HI,0x560),
INTC_VECT(LCDC_LCDCI,0x580),
INTC_VECT(TMU1_TUNI0,0x920),
INTC_VECT(TMU1_TUNI1,0x940),
INTC_VECT(TMU1_TUNI2,0x960),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2),
INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ 0, TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
{ 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
{ DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
{ 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
{ KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
{ 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
{ 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
{ 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
{ 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
{ 0,0,0,0,0,0,0,ATAPI_ATAPII } },
{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
{ 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa414001c, 16, 2, /* ICR1 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
mask_registers, prio_registers, sense_registers);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
void __init plat_mem_setup(void)
{
/* Register the URAM space as Node 1 */
setup_bootmem_node(1, 0x055f0000, 0x05610000);
}
arch/sh/kernel/setup.c
浏览文件 @ 178dd0cd
......@@ -335,7 +335,7 @@ static const char *cpu_name[] = {
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
};
......
drivers/serial/sh-sci.c
浏览文件 @ 178dd0cd
......@@ -333,7 +333,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
......@@ -384,6 +383,12 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
/* Nothing to do here.. */
sci_out(port, SCFCR, 0);
}
#else
/* For SH7750 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
......
drivers/serial/sh-sci.h
浏览文件 @ 178dd0cd
/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
*
* linux/drivers/serial/sh-sci.h
*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2000 Greg Banks
* Copyright (C) 2002, 2003 Paul Mundt
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
* Removed SH7300 support (Jul 2007).
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
*/
#include <linux/serial_core.h>
#include <asm/io.h>
#include <asm/gpio.h>
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
......@@ -102,6 +87,15 @@
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
# define SCSPTR0 0xa4050160
# define SCSPTR1 0xa405013e
# define SCSPTR2 0xa4050160
# define SCSPTR3 0xa405013e
# define SCSPTR4 0xa4050128
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
......@@ -395,6 +389,11 @@
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#else
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
......@@ -419,6 +418,18 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x24, 16)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8)
SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16)
SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8)
SCIF_FNS(SCTDSR, 0x0c, 8)
SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCLSR, 0x24, 16)
#else
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
/* name off sz off sz off sz off sz off sz*/
......@@ -589,6 +600,23 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
if (port->mapbase == 0xffe10000)
return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
if (port->mapbase == 0xffe20000)
return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
if (port->mapbase == 0xa4e30000)
return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
if (port->mapbase == 0xa4e40000)
return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
if (port->mapbase == 0xa4e50000)
return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
......@@ -727,6 +755,8 @@ static inline int sci_rxd_in(struct uart_port *port)
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(16*bps)-1)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
#elif defined(CONFIG_SUPERH64)
......
include/asm-sh/cpu-sh4/freq.h
浏览文件 @ 178dd0cd
......@@ -10,14 +10,14 @@
#ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
defined(CONFIG_CPU_SUBTYPE_SH7723) || \
defined(CONFIG_CPU_SUBTYPE_SH7366)
#define FRQCR 0xa4150000
#define VCLKCR 0xa4150004
#define SCLKACR 0xa4150008
#define SCLKBCR 0xa415000c
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#define IrDACLKCR 0xa4150010
#endif
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
......
include/asm-sh/cpu-sh4/rtc.h
浏览文件 @ 178dd0cd
#ifndef __ASM_SH_CPU_SH4_RTC_H
#define __ASM_SH_CPU_SH4_RTC_H
#ifdef CONFIG_CPU_SUBTYPE_SH7723
#define rtc_reg_size sizeof(u16)
#else
#define rtc_reg_size sizeof(u32)
#endif
#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
......
include/asm-sh/processor.h
浏览文件 @ 178dd0cd
......@@ -29,7 +29,8 @@ enum cpu_type {
CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
CPU_SH7723, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722, CPU_SH7366,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或