提交 1758b90e 编写于 作者: C Chris Wilson

drm/i915: Use a hybrid scheme for fast register waits

Ville Syrjälä reported that in the majority of wait_for(I915_READ()) he
inspect, most completed within the first couple of reads and that the
delay between those wait_for() reads was the ratelimiting step for many
code paths. For example, __gen6_update_ring_freq() was blamed for
slowing down boot by many milliseconds, but under Ville's scrutiny the
issue was just excessive delay waiting for sandybridge_pcode_write().

We can eliminate the wait by initially using a busyspin upon the register
read and only fallback to the sleeping loop in cases where the hardware
is indeed too slow. A threshold of 2 microseconds is used as the initial
ballpark.

To avoid excessive code bloating from converting every wait_for() into a
hybrid busy/sleep loop, we extend wait_for_register_fw() and export it
for use by other callers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-1-git-send-email-chris@chris-wilson.co.uk
上级 527b6abe
...@@ -2968,6 +2968,17 @@ u64 intel_uncore_edram_size(struct drm_i915_private *dev_priv); ...@@ -2968,6 +2968,17 @@ u64 intel_uncore_edram_size(struct drm_i915_private *dev_priv);
void assert_forcewakes_inactive(struct drm_i915_private *dev_priv); void assert_forcewakes_inactive(struct drm_i915_private *dev_priv);
int intel_wait_for_register(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const u32 mask,
const u32 value,
const unsigned long timeout_ms);
int intel_wait_for_register_fw(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const u32 mask,
const u32 value,
const unsigned long timeout_ms);
static inline bool intel_gvt_active(struct drm_i915_private *dev_priv) static inline bool intel_gvt_active(struct drm_i915_private *dev_priv)
{ {
return dev_priv->gvt.initialized; return dev_priv->gvt.initialized;
......
...@@ -1609,13 +1609,74 @@ static int gen6_reset_engines(struct drm_i915_private *dev_priv, ...@@ -1609,13 +1609,74 @@ static int gen6_reset_engines(struct drm_i915_private *dev_priv,
return ret; return ret;
} }
static int wait_for_register_fw(struct drm_i915_private *dev_priv, /**
i915_reg_t reg, * intel_wait_for_register_fw - wait until register matches expected state
const u32 mask, * @dev_priv: the i915 device
const u32 value, * @reg: the register to read
const unsigned long timeout_ms) * @mask: mask to apply to register value
* @value: expected value
* @timeout_ms: timeout in millisecond
*
* This routine waits until the target register @reg contains the expected
* @value after applying the @mask, i.e. it waits until
* (I915_READ_FW(@reg) & @mask) == @value
* Otherwise, the wait will timeout after @timeout_ms milliseconds.
*
* Note that this routine assumes the caller holds forcewake asserted, it is
* not suitable for very long waits. See intel_wait_for_register() if you
* wish to wait without holding forcewake for the duration (i.e. you expect
* the wait to be slow).
*
* Returns 0 if the register matches the desired condition, or -ETIMEOUT.
*/
int intel_wait_for_register_fw(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const u32 mask,
const u32 value,
const unsigned long timeout_ms)
{
#define done ((I915_READ_FW(reg) & mask) == value)
int ret = wait_for_us(done, 2);
if (ret)
ret = wait_for(done, timeout_ms);
return ret;
#undef done
}
/**
* intel_wait_for_register - wait until register matches expected state
* @dev_priv: the i915 device
* @reg: the register to read
* @mask: mask to apply to register value
* @value: expected value
* @timeout_ms: timeout in millisecond
*
* This routine waits until the target register @reg contains the expected
* @value after applying the @mask, i.e. it waits until
* (I915_READ(@reg) & @mask) == @value
* Otherwise, the wait will timeout after @timeout_ms milliseconds.
*
* Returns 0 if the register matches the desired condition, or -ETIMEOUT.
*/
int intel_wait_for_register(struct drm_i915_private *dev_priv,
i915_reg_t reg,
const u32 mask,
const u32 value,
const unsigned long timeout_ms)
{ {
return wait_for((I915_READ_FW(reg) & mask) == value, timeout_ms);
unsigned fw =
intel_uncore_forcewake_for_reg(dev_priv, reg, FW_REG_READ);
int ret;
intel_uncore_forcewake_get(dev_priv, fw);
ret = wait_for_us((I915_READ_FW(reg) & mask) == value, 2);
intel_uncore_forcewake_put(dev_priv, fw);
if (ret)
ret = wait_for((I915_READ_NOTRACE(reg) & mask) == value,
timeout_ms);
return ret;
} }
static int gen8_request_engine_reset(struct intel_engine_cs *engine) static int gen8_request_engine_reset(struct intel_engine_cs *engine)
...@@ -1626,11 +1687,11 @@ static int gen8_request_engine_reset(struct intel_engine_cs *engine) ...@@ -1626,11 +1687,11 @@ static int gen8_request_engine_reset(struct intel_engine_cs *engine)
I915_WRITE_FW(RING_RESET_CTL(engine->mmio_base), I915_WRITE_FW(RING_RESET_CTL(engine->mmio_base),
_MASKED_BIT_ENABLE(RESET_CTL_REQUEST_RESET)); _MASKED_BIT_ENABLE(RESET_CTL_REQUEST_RESET));
ret = wait_for_register_fw(dev_priv, ret = intel_wait_for_register_fw(dev_priv,
RING_RESET_CTL(engine->mmio_base), RING_RESET_CTL(engine->mmio_base),
RESET_CTL_READY_TO_RESET, RESET_CTL_READY_TO_RESET,
RESET_CTL_READY_TO_RESET, RESET_CTL_READY_TO_RESET,
700); 700);
if (ret) if (ret)
DRM_ERROR("%s: reset request timeout\n", engine->name); DRM_ERROR("%s: reset request timeout\n", engine->name);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册