提交 153f5a18 编写于 作者: J Joachim Eastwood 提交者: Mark Brown

ASoC: atmel-soc: make it buildable on other architectures

Not very useful on non AT91/AVR32 platforms but it provides
more build coverage and prepares for ARM multiplatform.

Also fixes a couple of format type warnings.
Signed-off-by: NJoachim Eastwood <manabian@gmail.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 f4319ff2
config SND_ATMEL_SOC
tristate "SoC Audio for the Atmel System-on-Chip"
depends on ARCH_AT91
depends on HAS_IOMEM
help
Say Y or M if you want to add support for codecs attached to
the ATMEL SSC interface. You will also need
......@@ -24,7 +24,7 @@ config SND_ATMEL_SOC_SSC
config SND_AT91_SOC_SAM9G20_WM8731
tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
depends on ATMEL_SSC && SND_ATMEL_SOC && AT91_PROGRAMMABLE_CLOCKS
depends on ARCH_AT91 && ATMEL_SSC && SND_ATMEL_SOC && AT91_PROGRAMMABLE_CLOCKS
select SND_ATMEL_SOC_PDC
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8731
......@@ -34,7 +34,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
config SND_AT91_SOC_AFEB9260
tristate "SoC Audio support for AFEB9260 board"
depends on ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
depends on ARCH_AT91 && ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
select SND_ATMEL_SOC_PDC
select SND_ATMEL_SOC_SSC
select SND_SOC_TLV320AIC23
......
......@@ -159,7 +159,7 @@ static int atmel_pcm_hw_params(struct snd_pcm_substream *substream,
pr_debug("atmel-pcm: "
"hw_params: DMA for %s initialized "
"(dma_bytes=%u, period_size=%u)\n",
"(dma_bytes=%zu, period_size=%zu)\n",
prtd->params->name,
runtime->dma_bytes,
prtd->period_size);
......@@ -201,7 +201,7 @@ static int atmel_pcm_trigger(struct snd_pcm_substream *substream,
int ret = 0;
pr_debug("atmel-pcm:buffer_size = %ld,"
"dma_area = %p, dma_bytes = %u\n",
"dma_area = %p, dma_bytes = %zu\n",
rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
switch (cmd) {
......
......@@ -49,7 +49,7 @@ static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
buf->private_data = NULL;
buf->area = dma_alloc_coherent(pcm->card->dev, size,
&buf->addr, GFP_KERNEL);
pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%d\n",
pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n",
(void *)buf->area, (void *)buf->addr, size);
if (!buf->area)
......
......@@ -42,8 +42,6 @@
#include <sound/initval.h>
#include <sound/soc.h>
#include <mach/hardware.h>
#include "atmel-pcm.h"
#include "atmel_ssc_dai.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册