V4L/DVB (8135): WRITE_RPS1() converts to le32 itself

... but two ancient drivers had not noticed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/ttpci/av7110.c

@@ -2402,18 +2402,18 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
 		saa7146_write(dev, MC1, MASK_29);
 		/* RPS1 timeout disable */
 		saa7146_write(dev, RPS_TOV1, 0);
-		WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
-		WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-		WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-		WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+		WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+		WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+		WRITE_RPS1(GPIO3_MSK);
+		WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
 		/* issue RPS1 interrupt to increment counter */
-		WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+		WRITE_RPS1(CMD_INTERRUPT);
 #endif
-		WRITE_RPS1(cpu_to_le32(CMD_STOP));
+		WRITE_RPS1(CMD_STOP);
 		/* Jump to begin of RPS program as safety measure               (p37) */
-		WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-		WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+		WRITE_RPS1(CMD_JUMP);
+		WRITE_RPS1(dev->d_rps1.dma_handle);
 
 #if RPS_IRQ
 		/* set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
@@ -2526,28 +2526,28 @@ static int __devinit av7110_attach(struct saa7146_dev* dev,
 		count = 0;
 
 		/* Wait Source Line Counter Threshold                           (p36) */
-		WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+		WRITE_RPS1(CMD_PAUSE | EVT_HS);
 		/* Set GPIO3=1                                                  (p42) */
-		WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-		WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-		WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+		WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+		WRITE_RPS1(GPIO3_MSK);
+		WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
 #if RPS_IRQ
 		/* issue RPS1 interrupt */
-		WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+		WRITE_RPS1(CMD_INTERRUPT);
 #endif
 		/* Wait reset Source Line Counter Threshold                     (p36) */
-		WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+		WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
 		/* Set GPIO3=0                                                  (p42) */
-		WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-		WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-		WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+		WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+		WRITE_RPS1(GPIO3_MSK);
+		WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
 		/* issue RPS1 interrupt */
-		WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+		WRITE_RPS1(CMD_INTERRUPT);
 #endif
 		/* Jump to begin of RPS program                                 (p37) */
-		WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-		WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+		WRITE_RPS1(CMD_JUMP);
+		WRITE_RPS1(dev->d_rps1.dma_handle);
 
 		/* Fix VSYNC level */
 		saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);

drivers/media/dvb/ttpci/budget-patch.c

@@ -431,22 +431,22 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 	// in budget patch GPIO3 is connected to VSYNC_B
 	count = 0;
 #if 0
-	WRITE_RPS1(cpu_to_le32(CMD_UPLOAD |
-	  MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ));
+	WRITE_RPS1(CMD_UPLOAD |
+	  MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 );
 #endif
-	WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B));
-	WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-	WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-	WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+	WRITE_RPS1(CMD_PAUSE | EVT_VBI_B);
+	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+	WRITE_RPS1(GPIO3_MSK);
+	WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
 	// issue RPS1 interrupt to increment counter
-	WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+	WRITE_RPS1(CMD_INTERRUPT);
 	// at least a NOP is neede between two interrupts
-	WRITE_RPS1(cpu_to_le32(CMD_NOP));
+	WRITE_RPS1(CMD_NOP);
 	// interrupt again
-	WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+	WRITE_RPS1(CMD_INTERRUPT);
 #endif
-	WRITE_RPS1(cpu_to_le32(CMD_STOP));
+	WRITE_RPS1(CMD_STOP);
 
 #if RPS_IRQ
 	// set event counter 1 source as RPS1 interrupt (0x03)          (rE4 p53)
@@ -558,28 +558,28 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 
 	// Wait Source Line Counter Threshold                           (p36)
-	WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS));
+	WRITE_RPS1(CMD_PAUSE | EVT_HS);
 	// Set GPIO3=1                                                  (p42)
-	WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-	WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-	WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24));
+	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+	WRITE_RPS1(GPIO3_MSK);
+	WRITE_RPS1(SAA7146_GPIO_OUTHI<<24);
 #if RPS_IRQ
 	// issue RPS1 interrupt
-	WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+	WRITE_RPS1(CMD_INTERRUPT);
 #endif
 	// Wait reset Source Line Counter Threshold                     (p36)
-	WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS));
+	WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS);
 	// Set GPIO3=0                                                  (p42)
-	WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2)));
-	WRITE_RPS1(cpu_to_le32(GPIO3_MSK));
-	WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24));
+	WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2));
+	WRITE_RPS1(GPIO3_MSK);
+	WRITE_RPS1(SAA7146_GPIO_OUTLO<<24);
 #if RPS_IRQ
 	// issue RPS1 interrupt
-	WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT));
+	WRITE_RPS1(CMD_INTERRUPT);
 #endif
 	// Jump to begin of RPS program                                 (p37)
-	WRITE_RPS1(cpu_to_le32(CMD_JUMP));
-	WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle));
+	WRITE_RPS1(CMD_JUMP);
+	WRITE_RPS1(dev->d_rps1.dma_handle);
 
 	// Fix VSYNC level
 	saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);