From 153755a774578dcf921f8145e786ce25f72368d2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 22 Jun 2008 14:19:39 -0300 Subject: [PATCH] V4L/DVB (8135): WRITE_RPS1() converts to le32 itself ... but two ancient drivers had not noticed. Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/av7110.c | 40 +++++++++++------------ drivers/media/dvb/ttpci/budget-patch.c | 44 +++++++++++++------------- 2 files changed, 42 insertions(+), 42 deletions(-) diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index dfe03cb42671..865c4596b7b7 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -2402,18 +2402,18 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, saa7146_write(dev, MC1, MASK_29); /* RPS1 timeout disable */ saa7146_write(dev, RPS_TOV1, 0); - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B)); - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(CMD_PAUSE | EVT_VBI_B); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); #if RPS_IRQ /* issue RPS1 interrupt to increment counter */ - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif - WRITE_RPS1(cpu_to_le32(CMD_STOP)); + WRITE_RPS1(CMD_STOP); /* Jump to begin of RPS program as safety measure (p37) */ - WRITE_RPS1(cpu_to_le32(CMD_JUMP)); - WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); #if RPS_IRQ /* set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) @@ -2526,28 +2526,28 @@ static int __devinit av7110_attach(struct saa7146_dev* dev, count = 0; /* Wait Source Line Counter Threshold (p36) */ - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS)); + WRITE_RPS1(CMD_PAUSE | EVT_HS); /* Set GPIO3=1 (p42) */ - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24)); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTHI<<24); #if RPS_IRQ /* issue RPS1 interrupt */ - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif /* Wait reset Source Line Counter Threshold (p36) */ - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS)); + WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS); /* Set GPIO3=0 (p42) */ - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); #if RPS_IRQ /* issue RPS1 interrupt */ - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif /* Jump to begin of RPS program (p37) */ - WRITE_RPS1(cpu_to_le32(CMD_JUMP)); - WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); /* Fix VSYNC level */ saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 9a155396d6ac..39bd0a20f53a 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -431,22 +431,22 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // in budget patch GPIO3 is connected to VSYNC_B count = 0; #if 0 - WRITE_RPS1(cpu_to_le32(CMD_UPLOAD | - MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 )); + WRITE_RPS1(CMD_UPLOAD | + MASK_10 | MASK_09 | MASK_08 | MASK_06 | MASK_05 | MASK_04 | MASK_03 | MASK_02 ); #endif - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_VBI_B)); - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(CMD_PAUSE | EVT_VBI_B); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); #if RPS_IRQ // issue RPS1 interrupt to increment counter - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); // at least a NOP is neede between two interrupts - WRITE_RPS1(cpu_to_le32(CMD_NOP)); + WRITE_RPS1(CMD_NOP); // interrupt again - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif - WRITE_RPS1(cpu_to_le32(CMD_STOP)); + WRITE_RPS1(CMD_STOP); #if RPS_IRQ // set event counter 1 source as RPS1 interrupt (0x03) (rE4 p53) @@ -558,28 +558,28 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte // Wait Source Line Counter Threshold (p36) - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | EVT_HS)); + WRITE_RPS1(CMD_PAUSE | EVT_HS); // Set GPIO3=1 (p42) - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTHI<<24)); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTHI<<24); #if RPS_IRQ // issue RPS1 interrupt - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif // Wait reset Source Line Counter Threshold (p36) - WRITE_RPS1(cpu_to_le32(CMD_PAUSE | RPS_INV | EVT_HS)); + WRITE_RPS1(CMD_PAUSE | RPS_INV | EVT_HS); // Set GPIO3=0 (p42) - WRITE_RPS1(cpu_to_le32(CMD_WR_REG_MASK | (GPIO_CTRL>>2))); - WRITE_RPS1(cpu_to_le32(GPIO3_MSK)); - WRITE_RPS1(cpu_to_le32(SAA7146_GPIO_OUTLO<<24)); + WRITE_RPS1(CMD_WR_REG_MASK | (GPIO_CTRL>>2)); + WRITE_RPS1(GPIO3_MSK); + WRITE_RPS1(SAA7146_GPIO_OUTLO<<24); #if RPS_IRQ // issue RPS1 interrupt - WRITE_RPS1(cpu_to_le32(CMD_INTERRUPT)); + WRITE_RPS1(CMD_INTERRUPT); #endif // Jump to begin of RPS program (p37) - WRITE_RPS1(cpu_to_le32(CMD_JUMP)); - WRITE_RPS1(cpu_to_le32(dev->d_rps1.dma_handle)); + WRITE_RPS1(CMD_JUMP); + WRITE_RPS1(dev->d_rps1.dma_handle); // Fix VSYNC level saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); -- GitLab