提交 1459336d 编写于 作者: J Jesse Brandeburg 提交者: Jeff Garzik

ixgb: trivial fix space after for

Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 52035bdb
......@@ -152,7 +152,7 @@ ixgb_shift_in_bits(struct ixgb_hw *hw)
eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
data = 0;
for(i = 0; i < 16; i++) {
for (i = 0; i < 16; i++) {
data = data << 1;
ixgb_raise_clock(hw, &eecd_reg);
......@@ -297,7 +297,7 @@ ixgb_wait_eeprom_command(struct ixgb_hw *hw)
* signal that the command has been completed by raising the DO signal.
* If DO does not go high in 10 milliseconds, then error out.
*/
for(i = 0; i < 200; i++) {
for (i = 0; i < 200; i++) {
eecd_reg = IXGB_READ_REG(hw, EECD);
if (eecd_reg & IXGB_EECD_DO)
......@@ -328,7 +328,7 @@ ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
u16 checksum = 0;
u16 i;
for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
checksum += ixgb_read_eeprom(hw, i);
if (checksum == (u16) EEPROM_SUM)
......@@ -351,7 +351,7 @@ ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
u16 checksum = 0;
u16 i;
for(i = 0; i < EEPROM_CHECKSUM_REG; i++)
for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
checksum += ixgb_read_eeprom(hw, i);
checksum = (u16) EEPROM_SUM - checksum;
......@@ -472,7 +472,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw)
ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
DEBUGOUT("ixgb_ee: Reading eeprom data\n");
for(i = 0; i < IXGB_EEPROM_SIZE ; i++) {
for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
u16 ee_data;
ee_data = ixgb_read_eeprom(hw, i);
checksum += ee_data;
......
......@@ -301,7 +301,7 @@ ixgb_get_regs(struct net_device *netdev,
*reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
/* there are 16 RAR entries in hardware, we only use 3 */
for(i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) {
for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) {
*reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
*reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
}
......@@ -441,12 +441,10 @@ ixgb_get_eeprom(struct net_device *netdev,
return -ENOMEM;
/* note the eeprom was good because the driver loaded */
for(i = 0; i <= (last_word - first_word); i++) {
for (i = 0; i <= (last_word - first_word); i++)
eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i));
}
memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
eeprom->len);
memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
kfree(eeprom_buff);
geeprom_error:
......@@ -500,7 +498,7 @@ ixgb_set_eeprom(struct net_device *netdev,
}
memcpy(ptr, bytes, eeprom->len);
for(i = 0; i <= (last_word - first_word); i++)
for (i = 0; i <= (last_word - first_word); i++)
ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]);
/* Update the checksum over the first part of the EEPROM if needed */
......@@ -666,7 +664,7 @@ ixgb_get_ethtool_stats(struct net_device *netdev,
int i;
ixgb_update_stats(adapter);
for(i = 0; i < IXGB_STATS_LEN; i++) {
for (i = 0; i < IXGB_STATS_LEN; i++) {
char *p = (char *)adapter+ixgb_gstrings_stats[i].stat_offset;
data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
......@@ -680,7 +678,7 @@ ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
switch(stringset) {
case ETH_SS_STATS:
for(i=0; i < IXGB_STATS_LEN; i++) {
for (i = 0; i < IXGB_STATS_LEN; i++) {
memcpy(data + i * ETH_GSTRING_LEN,
ixgb_gstrings_stats[i].stat_string,
ETH_GSTRING_LEN);
......
......@@ -347,7 +347,7 @@ ixgb_init_hw(struct ixgb_hw *hw)
/* Zero out the Multicast HASH table */
DEBUGOUT("Zeroing the MTA\n");
for(i = 0; i < IXGB_MC_TBL_SIZE; i++)
for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
/* Zero out the VLAN Filter Table Array */
......@@ -413,7 +413,7 @@ ixgb_init_rx_addrs(struct ixgb_hw *hw)
/* Zero out the other 15 receive addresses. */
DEBUGOUT("Clearing RAR[1-15]\n");
for(i = 1; i < IXGB_RAR_ENTRIES; i++) {
for (i = 1; i < IXGB_RAR_ENTRIES; i++) {
/* Write high reg first to disable the AV bit first */
IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
......@@ -452,19 +452,18 @@ ixgb_mc_addr_list_update(struct ixgb_hw *hw,
/* Clear RAR[1-15] */
DEBUGOUT(" Clearing RAR[1-15]\n");
for(i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
}
/* Clear the MTA */
DEBUGOUT(" Clearing MTA\n");
for(i = 0; i < IXGB_MC_TBL_SIZE; i++) {
for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
}
/* Add the new addresses */
for(i = 0; i < mc_addr_count; i++) {
for (i = 0; i < mc_addr_count; i++) {
DEBUGOUT(" Adding the multicast addresses:\n");
DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i,
mc_addr_list[i * (IXGB_ETH_LENGTH_OF_ADDRESS + pad)],
......@@ -649,7 +648,7 @@ ixgb_clear_vfta(struct ixgb_hw *hw)
{
u32 offset;
for(offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
return;
}
......@@ -790,7 +789,7 @@ ixgb_read_phy_reg(struct ixgb_hw *hw,
** from the CPU Write to the Ready bit assertion.
**************************************************************/
for(i = 0; i < 10; i++)
for (i = 0; i < 10; i++)
{
udelay(10);
......@@ -817,7 +816,7 @@ ixgb_read_phy_reg(struct ixgb_hw *hw,
** from the CPU Write to the Ready bit assertion.
**************************************************************/
for(i = 0; i < 10; i++)
for (i = 0; i < 10; i++)
{
udelay(10);
......@@ -886,7 +885,7 @@ ixgb_write_phy_reg(struct ixgb_hw *hw,
** from the CPU Write to the Ready bit assertion.
**************************************************************/
for(i = 0; i < 10; i++)
for (i = 0; i < 10; i++)
{
udelay(10);
......@@ -913,7 +912,7 @@ ixgb_write_phy_reg(struct ixgb_hw *hw,
** from the CPU Write to the Ready bit assertion.
**************************************************************/
for(i = 0; i < 10; i++)
for (i = 0; i < 10; i++)
{
udelay(10);
......
......@@ -398,7 +398,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_ioremap;
}
for(i = BAR_1; i <= BAR_5; i++) {
for (i = BAR_1; i <= BAR_5; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
......@@ -923,7 +923,7 @@ ixgb_clean_tx_ring(struct ixgb_adapter *adapter)
/* Free all the Tx ring sk_buffs */
for(i = 0; i < tx_ring->count; i++) {
for (i = 0; i < tx_ring->count; i++) {
buffer_info = &tx_ring->buffer_info[i];
ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
}
......@@ -981,7 +981,7 @@ ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
/* Free all the Rx ring sk_buffs */
for(i = 0; i < rx_ring->count; i++) {
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
if (buffer_info->skb) {
......@@ -1298,7 +1298,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
if (++i == tx_ring->count) i = 0;
}
for(f = 0; f < nr_frags; f++) {
for (f = 0; f < nr_frags; f++) {
struct skb_frag_struct *frag;
frag = &skb_shinfo(skb)->frags[f];
......@@ -1727,7 +1727,7 @@ ixgb_intr(int irq, void *data)
* every pass through this for loop checks both receive and
* transmit queues for completed descriptors, intended to
* avoid starvation issues and assist tx/rx fairness. */
for(i = 0; i < IXGB_MAX_INTR; i++)
for (i = 0; i < IXGB_MAX_INTR; i++)
if (!ixgb_clean_rx_irq(adapter) &
!ixgb_clean_tx_irq(adapter))
break;
......@@ -2196,7 +2196,7 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter)
if (adapter->vlgrp) {
u16 vid;
for(vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
if (!vlan_group_get_device(adapter->vlgrp, vid))
continue;
ixgb_vlan_rx_add_vid(adapter->netdev, vid);
......
......@@ -226,7 +226,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
int i;
struct ixgb_opt_list *ent;
for(i = 0; i < opt->arg.l.nr; i++) {
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册