Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc fixes from Benjamin Herrenschmidt:
 "This contains a couple more fixes for the system.h disintegration, a
  trivial section mismatch fix, a couple of patches from akpm that I
  didn't quite get he expected me to pickup, and a few more trivialities
  form Kumar that he appear to have forgotten to send me in the previous
  batch."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Fix use of set_current_state() in eeh event handling set_current_state() wart
  powerpc/eeh: Remove eeh_event_handler()->daemonize()
  powerpc/kvm: Fallout from system.h disintegration
  powerpc: Fix fallout from system.h split up
  powerpc: Mark const init data with __initconst instead of __initdata
  powerpc/qe: Update the SNUM table for MPC8569 Rev2.0
  powerpc/dts: Removed fsl,msi property from dts.
  powerpc/epapr: add "memory" as a clobber to all hypercalls
  powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigs
  powerpc/85xx: add the P1020UTM-PC DTS support
  powerpc/85xx: add the P1020MBG-PC DTS support
  powerpc/8xxx: remove 85xx/86xx restrictions from fsl_guts.h

arch/powerpc/boot/dts/p1020mbg-pc.dtsi

+/*
+ * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 128KB for DTB Image */
+			reg = <0x0 0x00020000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@20000 {
+			/* 3.875 MB for Linux Kernel Image */
+			reg = <0x00020000 0x003e0000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 58MB for Root file System */
+			reg = <0x00400000 0x03a00000>;
+			label = "NOR Root File System";
+		};
+
+		partition@3e00000 {
+			/* This location must not be altered  */
+			/* 1M for Vitesse 7385 Switch firmware */
+			reg = <0x3e00000 0x00100000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@3f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	*/
+	usb@23000 {
+		status = "disabled";
+		phy_type = "ulpi";
+	};
+};

arch/powerpc/boot/dts/p1020mbg-pc_32b.dts

+/*
+ * P1020 MBG-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020MBG-PC";
+	compatible = "fsl,P1020MBG-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR and L2 switch */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020mbg-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020mbg-pc_36b.dts

+/*
+ * P1020 MBG-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020MBG-PC";
+	compatible = "fsl,P1020MBG-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0x0 0x1000>;
+
+		/* NOR and L2 switch */
+		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020mbg-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020utm-pc.dtsi

+/*
+ * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x2000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* 256KB for DTB Image */
+			reg = <0x0 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@40000 {
+			/* 3.75 MB for Linux Kernel Image */
+			reg = <0x00040000 0x003c0000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 27MB for Root file System */
+			reg = <0x00400000 0x01b00000>;
+			label = "NOR Root File System";
+		};
+
+		partition@1f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x01f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	*/
+	usb@23000 {
+		status = "disabled";
+		phy_type = "ulpi";
+	};
+};

arch/powerpc/boot/dts/p1020utm-pc_32b.dts

+/*
+ * P1020 UTM-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020UTM-PC";
+	compatible = "fsl,P1020UTM-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0x0 0xffe05000 0x0 0x1000>;
+
+		/* NOR */
+		ranges = <0x0 0x0 0x0 0xec000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		reg = <0x0 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0x0 0xffe0a000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020utm-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020utm-pc_36b.dts

+/*
+ * P1020 UTM-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020UTM-PC";
+	compatible = "fsl,P1020UTM-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0x0 0x1000>;
+
+		/* NOR */
+		ranges = <0x0 0x0 0xf 0xec000000 0x02000000
+			  0x1 0x0 0xf 0xffa00000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0x0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020utm-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p2041rdb.dts

@@ -135,7 +135,6 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -151,7 +150,6 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -167,7 +165,6 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000

arch/powerpc/boot/dts/p3041ds.dts

@@ -173,7 +173,6 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -189,7 +188,6 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -205,7 +203,6 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -221,7 +218,6 @@
 		reg = <0xf 0xfe203000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000

arch/powerpc/boot/dts/p3060qds.dts

@@ -212,7 +212,6 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -228,7 +227,6 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000

arch/powerpc/boot/dts/p4080ds.dts

@@ -141,7 +141,6 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -157,7 +156,6 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -173,7 +171,6 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000

arch/powerpc/boot/dts/p5020ds.dts

@@ -173,7 +173,6 @@
 		reg = <0xf 0xfe200000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		fsl,msi = <&msi0>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -189,7 +188,6 @@
 		reg = <0xf 0xfe201000 0 0x1000>;
 		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		fsl,msi = <&msi1>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -205,7 +203,6 @@
 		reg = <0xf 0xfe202000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
@@ -221,7 +218,6 @@
 		reg = <0xf 0xfe203000 0 0x1000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		fsl,msi = <&msi2>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000

arch/powerpc/configs/corenet32_smp_defconfig

@@ -116,6 +116,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -71,6 +71,8 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_HID_SUPPORT is not set

arch/powerpc/configs/mpc85xx_defconfig

@@ -117,6 +117,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
 CONFIG_NVRAM=y
 CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 CONFIG_SPI=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -119,6 +119,7 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_QE=m
 CONFIG_NVRAM=y
 CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_CPM=m
 CONFIG_I2C_MPC=y
 CONFIG_SPI=y

arch/powerpc/include/asm/epapr_hcalls.h

@@ -134,10 +134,15 @@
  * whether they will be clobbered.
  *
  * Note that r11 can be used as an output parameter.
+ *
+ * The "memory" clobber is only necessary for hcalls where the Hypervisor
+ * will read or write guest memory. However, we add it to all hcalls because
+ * the impact is minimal, and we want to ensure that it's present for the
+ * hcalls that need it.
 */
 
 /* List of common clobbered registers.  Do not use this macro. */
-#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc"
+#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory"
 
 #define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS
 #define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10"

arch/powerpc/include/asm/fsl_guts.h

@@ -16,15 +16,6 @@
 #define __ASM_POWERPC_FSL_GUTS_H__
 #ifdef __KERNEL__
 
-/*
- * These #ifdefs are safe because it's not possible to build a kernel that
- * runs on e500 and e600 cores.
- */
-
-#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx)
-#error Only 85xx and 86xx SOCs are supported
-#endif
-
 /**
  * Global Utility Registers.
  *
@@ -36,11 +27,7 @@
  * different names.  In these cases, one name is chosen to avoid extraneous
  * #ifdefs.
  */
-#ifdef CONFIG_PPC_85xx
-struct ccsr_guts_85xx {
-#else
-struct ccsr_guts_86xx {
-#endif
+struct ccsr_guts {
 	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
 	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
 	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
@@ -77,11 +64,8 @@ struct ccsr_guts_86xx {
 	u8	res0a8[0xb0 - 0xa8];
 	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
 	u8	res0b4[0xc0 - 0xb4];
-#ifdef CONFIG_PPC_85xx
-	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register */
-#else
-	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
-#endif
+	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register
+					     Called 'elbcvselcr' on 86xx SOCs */
 	u8	res0c4[0x224 - 0xc4];
 	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
 	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
@@ -136,7 +120,7 @@ struct ccsr_guts_86xx {
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
  */
-static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts,
+static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int device)
 {
 	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
@@ -172,7 +156,7 @@ static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts,
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * value: the new value for the bit (0 or 1)
  */
-static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts,
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int value)
 {
 	if ((ch == 0) || (ch == 3)) {

arch/powerpc/kernel/fadump.c

@@ -40,6 +40,8 @@
 #include <asm/prom.h>
 #include <asm/rtas.h>
 #include <asm/fadump.h>
+#include <asm/debug.h>
+#include <asm/setup.h>
 
 static struct fw_dump fw_dump;
 static struct fadump_mem_struct fdm;

arch/powerpc/kernel/kgdb.c

@@ -24,6 +24,7 @@
 #include <asm/current.h>
 #include <asm/processor.h>
 #include <asm/machdep.h>
+#include <asm/debug.h>
 
 /*
  * This table contains the mapping between PowerPC hardware trap types, and

arch/powerpc/kvm/book3s_emulate.c

@@ -21,6 +21,7 @@
 #include <asm/disassemble.h>
 #include <asm/kvm_book3s.h>
 #include <asm/reg.h>
+#include <asm/switch_to.h>
 
 #define OP_19_XOP_RFID		18
 #define OP_19_XOP_RFI		50

arch/powerpc/kvm/book3s_paired_singles.c

@@ -24,6 +24,7 @@
 #include <asm/kvm_fpu.h>
 #include <asm/reg.h>
 #include <asm/cacheflush.h>
+#include <asm/switch_to.h>
 #include <linux/vmalloc.h>
 
 /* #define DEBUG */

arch/powerpc/kvm/book3s_pr.c

@@ -33,6 +33,7 @@
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
 #include <asm/mmu_context.h>
+#include <asm/switch_to.h>
 #include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>

arch/powerpc/platforms/52xx/mpc52xx_pci.c

@@ -93,7 +93,7 @@ struct mpc52xx_pci {
 };
 
 /* MPC5200 device tree match tables */
-const struct of_device_id mpc52xx_pci_ids[] __initdata = {
+const struct of_device_id mpc52xx_pci_ids[] __initconst = {
 	{ .type = "pci", .compatible = "fsl,mpc5200-pci", },
 	{ .type = "pci", .compatible = "mpc5200-pci", },
 	{}

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -270,7 +270,7 @@ static void __init mpc85xx_mds_qe_init(void)
 
 	if (machine_is(p1021_mds)) {
 
-		struct ccsr_guts_85xx __iomem *guts;
+		struct ccsr_guts __iomem *guts;
 
 		np = of_find_node_by_name(NULL, "global-utilities");
 		if (np) {

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

@@ -127,7 +127,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
 	if (machine_is(p1025_rdb)) {
 
-		struct ccsr_guts_85xx __iomem *guts;
+		struct ccsr_guts __iomem *guts;
 
 		np = of_find_node_by_name(NULL, "global-utilities");
 		if (np) {

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -150,7 +150,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 {
 	struct device_node *guts_node;
 	struct device_node *indirect_node = NULL;
-	struct ccsr_guts_85xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 	u8 __iomem *lbc_lcs0_ba = NULL;
 	u8 __iomem *lbc_lcs1_ba = NULL;
 	u8 b;
@@ -269,7 +269,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 void p1022ds_set_pixel_clock(unsigned int pixclock)
 {
 	struct device_node *guts_np = NULL;
-	struct ccsr_guts_85xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 	unsigned long freq;
 	u64 temp;
 	u32 pxclk;

arch/powerpc/platforms/86xx/mpc8610_hpcd.c

@@ -225,7 +225,7 @@ void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port)
 void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
 {
 	struct device_node *guts_np = NULL;
-	struct ccsr_guts_86xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 	unsigned long freq;
 	u64 temp;
 	u32 pxclk;

arch/powerpc/platforms/cell/qpace_setup.c

@@ -61,7 +61,7 @@ static void qpace_progress(char *s, unsigned short hex)
 	printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
-static const struct of_device_id qpace_bus_ids[] __initdata = {
+static const struct of_device_id qpace_bus_ids[] __initconst = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "spider", },

arch/powerpc/platforms/cell/setup.c

@@ -140,7 +140,7 @@ static int __devinit cell_setup_phb(struct pci_controller *phb)
 	return 0;
 }
 
-static const struct of_device_id cell_bus_ids[] __initdata = {
+static const struct of_device_id cell_bus_ids[] __initconst = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "spider", },

arch/powerpc/platforms/pseries/eeh_event.c

@@ -59,8 +59,7 @@ static int eeh_event_handler(void * dummy)
 	struct eeh_event *event;
 	struct eeh_dev *edev;
 
-	daemonize("eehd");
-	set_current_state(TASK_INTERRUPTIBLE);
+	set_task_comm(current, "eehd");
 
 	spin_lock_irqsave(&eeh_eventlist_lock, flags);
 	event = NULL;
@@ -83,6 +82,7 @@ static int eeh_event_handler(void * dummy)
 	printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
 	       eeh_pci_name(edev->pdev));
 
+	set_current_state(TASK_INTERRUPTIBLE);	/* Don't add to load average */
 	edev = handle_eeh_events(event);
 
 	eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING);

arch/powerpc/sysdev/qe_lib/qe.c

 /*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2010 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
  * 		Li Yang <leoli@freescale.com>
@@ -266,7 +266,19 @@ EXPORT_SYMBOL(qe_clock_source);
 static void qe_snums_init(void)
 {
 	int i;
-	static const u8 snum_init[] = {
+	static const u8 snum_init_76[] = {
+		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
+		0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
+		0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
+		0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
+		0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
+		0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
+		0xF4, 0xF5, 0xFC, 0xFD,
+	};
+	static const u8 snum_init_46[] = {
 		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
 		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
 		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
@@ -274,9 +286,15 @@ static void qe_snums_init(void)
 		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
 		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
 	};
+	static const u8 *snum_init;
 
 	qe_num_of_snum = qe_get_num_of_snums();
 
+	if (qe_num_of_snum == 76)
+		snum_init = snum_init_76;
+	else
+		snum_init = snum_init_46;
+
 	for (i = 0; i < qe_num_of_snum; i++) {
 		snums[i].num = snum_init[i];
 		snums[i].state = QE_SNUM_STATE_FREE;

drivers/net/ethernet/freescale/ucc_geth.c

@@ -3945,6 +3945,8 @@ static int ucc_geth_probe(struct platform_device* ofdev)
 		}
 
 	if (max_speed == SPEED_1000) {
+		unsigned int snums = qe_get_num_of_snums();
+
 		/* configure muram FIFOs for gigabit operation */
 		ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT;
 		ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT;
@@ -3954,11 +3956,11 @@ static int ucc_geth_probe(struct platform_device* ofdev)
 		ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
 		ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
 
-		/* If QE's snum number is 46 which means we need to support
+		/* If QE's snum number is 46/76 which means we need to support
 		 * 4 UECs at 1000Base-T simultaneously, we need to allocate
 		 * more Threads to Rx.
 		 */
-		if (qe_get_num_of_snums() == 46)
+		if ((snums == 76) || (snums == 46))
 			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
 		else
 			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;

sound/soc/fsl/mpc8610_hpcd.c

@@ -58,9 +58,9 @@ static int mpc8610_hpcd_machine_probe(struct snd_soc_card *card)
 {
 	struct mpc8610_hpcd_data *machine_data =
 		container_of(card, struct mpc8610_hpcd_data, card);
-	struct ccsr_guts_86xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 
-	guts = ioremap(guts_phys, sizeof(struct ccsr_guts_86xx));
+	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
 	if (!guts) {
 		dev_err(card->dev, "could not map global utilities\n");
 		return -ENOMEM;
@@ -142,9 +142,9 @@ static int mpc8610_hpcd_machine_remove(struct snd_soc_card *card)
 {
 	struct mpc8610_hpcd_data *machine_data =
 		container_of(card, struct mpc8610_hpcd_data, card);
-	struct ccsr_guts_86xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 
-	guts = ioremap(guts_phys, sizeof(struct ccsr_guts_86xx));
+	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
 	if (!guts) {
 		dev_err(card->dev, "could not map global utilities\n");
 		return -ENOMEM;

sound/soc/fsl/p1022_ds.c

@@ -46,7 +46,7 @@
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx)
  */
-static inline void guts_set_dmuxcr(struct ccsr_guts_85xx __iomem *guts,
+static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int device)
 {
 	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
@@ -90,9 +90,9 @@ static int p1022_ds_machine_probe(struct snd_soc_card *card)
 {
 	struct machine_data *mdata =
 		container_of(card, struct machine_data, card);
-	struct ccsr_guts_85xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 
-	guts = ioremap(guts_phys, sizeof(struct ccsr_guts_85xx));
+	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
 	if (!guts) {
 		dev_err(card->dev, "could not map global utilities\n");
 		return -ENOMEM;
@@ -164,9 +164,9 @@ static int p1022_ds_machine_remove(struct snd_soc_card *card)
 {
 	struct machine_data *mdata =
 		container_of(card, struct machine_data, card);
-	struct ccsr_guts_85xx __iomem *guts;
+	struct ccsr_guts __iomem *guts;
 
-	guts = ioremap(guts_phys, sizeof(struct ccsr_guts_85xx));
+	guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
 	if (!guts) {
 		dev_err(card->dev, "could not map global utilities\n");
 		return -ENOMEM;