提交 13a097bd 编写于 作者: F Fabio Estevam 提交者: David S. Miller

fec: Check the return value from clk_prepare_enable()

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 79820e72
......@@ -2103,12 +2103,25 @@ fec_probe(struct platform_device *pdev)
fep->bufdesc_ex = 0;
}
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
if (fep->clk_enet_out)
clk_prepare_enable(fep->clk_enet_out);
if (fep->clk_ptp)
clk_prepare_enable(fep->clk_ptp);
ret = clk_prepare_enable(fep->clk_ahb);
if (ret)
goto failed_clk;
ret = clk_prepare_enable(fep->clk_ipg);
if (ret)
goto failed_clk_ipg;
if (fep->clk_enet_out) {
ret = clk_prepare_enable(fep->clk_enet_out);
if (ret)
goto failed_clk_enet_out;
}
if (fep->clk_ptp) {
ret = clk_prepare_enable(fep->clk_ptp);
if (ret)
goto failed_clk_ptp;
}
fep->reg_phy = devm_regulator_get(&pdev->dev, "phy");
if (!IS_ERR(fep->reg_phy)) {
......@@ -2181,9 +2194,12 @@ fec_probe(struct platform_device *pdev)
failed_regulator:
if (fep->clk_ptp)
clk_disable_unprepare(fep->clk_ptp);
failed_clk_ptp:
if (fep->clk_enet_out)
clk_disable_unprepare(fep->clk_enet_out);
failed_clk_enet_out:
clk_disable_unprepare(fep->clk_ipg);
failed_clk_ipg:
clk_disable_unprepare(fep->clk_ahb);
failed_clk:
failed_ioremap:
......@@ -2260,18 +2276,44 @@ fec_resume(struct device *dev)
return ret;
}
clk_prepare_enable(fep->clk_ahb);
clk_prepare_enable(fep->clk_ipg);
if (fep->clk_enet_out)
clk_prepare_enable(fep->clk_enet_out);
if (fep->clk_ptp)
clk_prepare_enable(fep->clk_ptp);
ret = clk_prepare_enable(fep->clk_ahb);
if (ret)
goto failed_clk_ahb;
ret = clk_prepare_enable(fep->clk_ipg);
if (ret)
goto failed_clk_ipg;
if (fep->clk_enet_out) {
ret = clk_prepare_enable(fep->clk_enet_out);
if (ret)
goto failed_clk_enet_out;
}
if (fep->clk_ptp) {
ret = clk_prepare_enable(fep->clk_ptp);
if (ret)
goto failed_clk_ptp;
}
if (netif_running(ndev)) {
fec_restart(ndev, fep->full_duplex);
netif_device_attach(ndev);
}
return 0;
failed_clk_ptp:
if (fep->clk_enet_out)
clk_disable_unprepare(fep->clk_enet_out);
failed_clk_enet_out:
clk_disable_unprepare(fep->clk_ipg);
failed_clk_ipg:
clk_disable_unprepare(fep->clk_ahb);
failed_clk_ahb:
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册