提交 10dbf8f8 编写于 作者: E Elad Raz 提交者: David S. Miller

mlxsw: switchx2: Fix port speed configuration

In SwitchX-2 we configure the port speed to negotiate with 40G link only.
Add support for all other supported speeds.

Fixes: 31557f0f ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support")
Signed-off-by: NElad Raz <eladr@mellanox.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e50e789c
......@@ -662,6 +662,7 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
};
#define MLXSW_SX_PORT_LINK_MODE_LEN ARRAY_SIZE(mlxsw_sx_port_link_mode)
#define MLXSW_SX_PORT_BASE_SPEED 10000 /* Mb/s */
static u32 mlxsw_sx_from_ptys_supported_port(u32 ptys_eth_proto)
{
......@@ -809,6 +810,18 @@ static u32 mlxsw_sx_to_ptys_speed(u32 speed)
return ptys_proto;
}
static u32 mlxsw_sx_to_ptys_upper_speed(u32 upper_speed)
{
u32 ptys_proto = 0;
int i;
for (i = 0; i < MLXSW_SX_PORT_LINK_MODE_LEN; i++) {
if (mlxsw_sx_port_link_mode[i].speed <= upper_speed)
ptys_proto |= mlxsw_sx_port_link_mode[i].mask;
}
return ptys_proto;
}
static int mlxsw_sx_port_set_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
......@@ -955,13 +968,17 @@ static int mlxsw_sx_port_stp_state_set(struct mlxsw_sx_port *mlxsw_sx_port,
return err;
}
static int mlxsw_sx_port_speed_set(struct mlxsw_sx_port *mlxsw_sx_port,
u32 speed)
static int
mlxsw_sx_port_speed_by_width_set(struct mlxsw_sx_port *mlxsw_sx_port, u8 width)
{
struct mlxsw_sx *mlxsw_sx = mlxsw_sx_port->mlxsw_sx;
u32 upper_speed = MLXSW_SX_PORT_BASE_SPEED * width;
char ptys_pl[MLXSW_REG_PTYS_LEN];
u32 eth_proto_admin;
mlxsw_reg_ptys_pack(ptys_pl, mlxsw_sx_port->local_port, speed);
eth_proto_admin = mlxsw_sx_to_ptys_upper_speed(upper_speed);
mlxsw_reg_ptys_pack(ptys_pl, mlxsw_sx_port->local_port,
eth_proto_admin);
return mlxsw_reg_write(mlxsw_sx->core, MLXSW_REG(ptys), ptys_pl);
}
......@@ -977,7 +994,7 @@ mlxsw_sx_port_mac_learning_mode_set(struct mlxsw_sx_port *mlxsw_sx_port,
}
static int mlxsw_sx_port_create(struct mlxsw_sx *mlxsw_sx, u8 local_port,
u8 module)
u8 module, u8 width)
{
struct mlxsw_sx_port *mlxsw_sx_port;
struct net_device *dev;
......@@ -1038,8 +1055,7 @@ static int mlxsw_sx_port_create(struct mlxsw_sx *mlxsw_sx, u8 local_port,
goto err_port_swid_set;
}
err = mlxsw_sx_port_speed_set(mlxsw_sx_port,
MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4);
err = mlxsw_sx_port_speed_by_width_set(mlxsw_sx_port, width);
if (err) {
dev_err(mlxsw_sx->bus_info->dev, "Port %d: Failed to set speed\n",
mlxsw_sx_port->local_port);
......@@ -1156,7 +1172,7 @@ static int mlxsw_sx_ports_create(struct mlxsw_sx *mlxsw_sx)
goto err_port_module_info_get;
if (!width)
continue;
err = mlxsw_sx_port_create(mlxsw_sx, i, module);
err = mlxsw_sx_port_create(mlxsw_sx, i, module, width);
if (err)
goto err_port_create;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册