Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 1079cac0 编写于 作者: I Ingo Molnar
浏览文件
操作

Merge commit 'v2.6.30-rc6' into tracing/core 

Merge reason: we were on an -rc4 base, sync up to -rc6
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 5872144f 1406de8e
展开全部 隐藏空白更改
内联 并排
Showing with 8397 addition and 6482 deletion
Documentation/DocBook/kgdb.tmpl
浏览文件 @ 1079cac0
......@@ -281,7 +281,7 @@
seriously wrong while debugging, it will most often be the case
that you want to enable gdb to be verbose about its target
communications. You do this prior to issuing the <constant>target
remote</constant> command by typing in: <constant>set remote debug 1</constant>
remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
</chapter>
<chapter id="KGDBTestSuite">
......
Documentation/kernel-parameters.txt
浏览文件 @ 1079cac0
......@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
usbcore.blinkenlights=1
Hyphens (dashes) and underscores are equivalent in parameter names, so
log_buf_len=1M print-fatal-signals=1
can also be entered as
log-buf-len=1M print_fatal_signals=1
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
......@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
apic= [APIC,i386] Advanced Programmable Interrupt Controller
apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
......@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
enable_timer_pin_1 [i386,x86-64]
enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
......@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for IA-64, off otherwise.
for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
......
Documentation/sysctl/vm.txt
浏览文件 @ 1079cac0
......@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
- nr_hugepages
- nr_overcommit_hugepages
- nr_pdflush_threads
- nr_pdflush_threads_min
- nr_pdflush_threads_max
- nr_trim_pages (only if CONFIG_MMU=n)
- numa_zonelist_order
- oom_dump_tasks
......@@ -469,32 +467,6 @@ The default value is 0.
==============================================================
nr_pdflush_threads_min
This value controls the minimum number of pdflush threads.
At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
threads for the kernel's lifetime.
The default value is 2. The minimum value you can specify is 1, and
the maximum value is the current setting of 'nr_pdflush_threads_max'.
See 'nr_pdflush_threads_max' below for more information.
==============================================================
nr_pdflush_threads_max
This value controls the maximum number of pdflush threads that can be
created. The pdflush algorithm will create a new pdflush thread (up to
this maximum) if no pdflush threads have been available for >= 1 second.
The default value is 8. The minimum value you can specify is the
current value of 'nr_pdflush_threads_min' and the
maximum is 1000.
==============================================================
overcommit_memory:
This value contains a flag that enables memory overcommitment.
......
Documentation/sysfs-rules.txt
浏览文件 @ 1079cac0
......@@ -113,7 +113,7 @@ versions of the sysfs interface.
"devices" directory at /sys/subsystem/<name>/devices.
If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
ignored. If it does not exist, you have always to scan all three
ignored. If it does not exist, you always have to scan all three
places, as the kernel is free to move a subsystem from one place to
the other, as long as the devices are still reachable by the same
subsystem name.
......
Makefile
浏览文件 @ 1079cac0
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
EXTRAVERSION = -rc4
EXTRAVERSION = -rc6
NAME = Vindictive Armadillo
# *DOCUMENTATION*
......
arch/alpha/include/asm/percpu.h
浏览文件 @ 1079cac0
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
#include <linux/compiler.h>
#include <linux/threads.h>
#include <linux/percpu-defs.h>
/*
* Determine the real variable name from the name visible in the
......@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#endif /* SMP */
#include <asm-generic/percpu.h>
#ifdef CONFIG_SMP
#define PER_CPU_BASE_SECTION ".data.percpu"
#else
#define PER_CPU_BASE_SECTION ".data"
#endif
#ifdef CONFIG_SMP
#ifdef MODULE
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
#endif
#define PER_CPU_FIRST_SECTION ".first"
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#define PER_CPU_FIRST_SECTION ""
#endif
#define PER_CPU_ATTRIBUTES
#endif /* __ALPHA_PERCPU_H */
arch/arm/Kconfig
浏览文件 @ 1079cac0
......@@ -454,6 +454,7 @@ config ARCH_MXC
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
......
arch/arm/configs/kirkwood_defconfig
浏览文件 @ 1079cac0
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc5
# Tue Mar 3 21:45:57 2009
# Linux kernel version: 2.6.30-rc4
# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
......@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
......@@ -89,6 +89,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
......@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
......@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
......@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
......@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
......@@ -237,6 +241,7 @@ CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
......@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -293,7 +300,6 @@ CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
......@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
......@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
......@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
......@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
......@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
......@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
......@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
......@@ -724,8 +734,10 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
......@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
......@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
......@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
......@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
......@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
......@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
......@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
......@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# see USB_STORAGE Help for more information
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
......@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
......@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
......@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
......@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
......@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
......@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
......@@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
......@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
......@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
......@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
......@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
......@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
......@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
......@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
......@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
arch/arm/configs/mv78xx0_defconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/arm/configs/mx31moboard_defconfig 已删除 100644 → 0
浏览文件 @ 5872144f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc5
# Fri Oct 24 11:41:22 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM7X00A is not set
#
# Boot options
#
#
# Power management
#
#
# Freescale MXC Implementations
#
# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
#
# MX3 Options
#
# CONFIG_MACH_MX31ADS is not set
# CONFIG_MACH_PCM037 is not set
# CONFIG_MACH_MX31LITE is not set
CONFIG_MACH_MX31MOBOARD=y
# CONFIG_MXC_IRQ_PRIOR is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V6=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
arch/arm/configs/mx3_defconfig
浏览文件 @ 1079cac0
......@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
......
arch/arm/configs/orion5x_defconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/arm/include/asm/elf.h
浏览文件 @ 1079cac0
......@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_MOVW_ABS_NC 43
#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.
......
arch/arm/kernel/module.c
浏览文件 @ 1079cac0
......@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u32 *)loc = offset & 0x7fffffff;
break;
case R_ARM_MOVW_ABS_NC:
case R_ARM_MOVT_ABS:
offset = *(u32 *)loc;
offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
offset >>= 16;
*(u32 *)loc &= 0xfff0f000;
*(u32 *)loc |= ((offset & 0xf000) << 4) |
(offset & 0x0fff);
break;
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
......
arch/arm/mach-davinci/board-dm644x-evm.c
浏览文件 @ 1079cac0
......@@ -211,7 +211,7 @@ static struct resource ide_resources[] = {
},
};
static u64 ide_dma_mask = DMA_32BIT_MASK;
static u64 ide_dma_mask = DMA_BIT_MASK(32);
static struct platform_device ide_dev = {
.name = "palm_bk3710",
......@@ -220,7 +220,7 @@ static struct platform_device ide_dev = {
.num_resources = ARRAY_SIZE(ide_resources),
.dev = {
.dma_mask = &ide_dma_mask,
.coherent_dma_mask = DMA_32BIT_MASK,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
......
arch/arm/mach-davinci/include/mach/asp.h 0 → 100644
浏览文件 @ 1079cac0
/*
* <mach/asp.h> - DaVinci Audio Serial Port support
*/
#ifndef __ASM_ARCH_DAVINCI_ASP_H
#define __ASM_ARCH_DAVINCI_ASP_H
#include <mach/irqs.h>
/* Bases of register banks */
#define DAVINCI_ASP0_BASE 0x01E02000
#define DAVINCI_ASP1_BASE 0x01E04000
/* EDMA channels */
#define DAVINCI_DMA_ASP0_TX 2
#define DAVINCI_DMA_ASP0_RX 3
#define DAVINCI_DMA_ASP1_TX 8
#define DAVINCI_DMA_ASP1_RX 9
/* Interrupts */
#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
#define DAVINCI_ASP0_TX_INT IRQ_MBXINT
#define DAVINCI_ASP1_RX_INT IRQ_MBRINT
#define DAVINCI_ASP1_TX_INT IRQ_MBXINT
#endif /* __ASM_ARCH_DAVINCI_ASP_H */
arch/arm/mach-ixp4xx/ixp4xx_npe.c
浏览文件 @ 1079cac0
......@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
}
if (!found)
return -ENOSYS;
return -ENODEV;
return 0;
}
......
arch/arm/mach-pxa/Kconfig
浏览文件 @ 1079cac0
......@@ -289,12 +289,12 @@ config MACH_LITTLETON
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select PXA930
select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select PXA930
select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
......
arch/arm/mach-s3c2412/pm.c
浏览文件 @ 1079cac0
......@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
......@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
flush_cache_all();
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
......
arch/arm/mach-s3c6400/include/mach/map.h
浏览文件 @ 1079cac0
......@@ -40,6 +40,8 @@
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
......
arch/arm/plat-mxc/dma-mx1-mx2.c
浏览文件 @ 1079cac0
......@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
local_irq_restore(flags);
return -EBUSY;
}
memset(imxdma, 0, sizeof(imxdma));
imxdma->name = name;
local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
local_irq_restore(flags);
imxdma->name = NULL;
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
......@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
imxdma->watchdog.data = channel;
#endif
imxdma->name = name;
imxdma->irq_handler = NULL;
imxdma->err_handler = NULL;
imxdma->data = NULL;
imxdma->sg = NULL;
local_irq_restore(flags);
return ret;
}
EXPORT_SYMBOL(imx_dma_request);
......@@ -737,10 +733,7 @@ void imx_dma_free(int channel)
local_irq_save(flags);
/* Disable interrupts */
__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
DMA_BASE + DMA_DIMR);
__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
DMA_BASE + DMA_CCR(channel));
imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
......
arch/arm/plat-mxc/gpio.c
浏览文件 @ 1079cac0
......@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
BUG_ON(!irq_stat);
mxc_gpio_irq_handler(port, irq_stat);
}
#endif
......
arch/arm/plat-mxc/include/mach/board-mx27ads.h
浏览文件 @ 1079cac0
......@@ -47,7 +47,7 @@
/*
* Base address of PBC controller, CS4
*/
#define PBC_BASE_ADDRESS 0xEB000000
#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
......
arch/cris/Makefile
浏览文件 @ 1079cac0
......@@ -70,7 +70,7 @@ SRC_ARCH = $(srctree)/arch/cris
# cris object files path
OBJ_ARCH = $(objtree)/arch/cris
boot := arch/cris/$(SARCH)/boot
boot := arch/cris/boot
MACHINE := arch/cris/$(SARCH)
all: zImage
......@@ -81,15 +81,15 @@ zImage Image: vmlinux
archprepare:
archclean:
$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
$(Q)if [ -e arch/cris/boot ]; then \
$(MAKE) $(clean)=arch/cris/boot; \
fi
CLEAN_FILES += \
$(MACHINE)/boot/zImage \
$(MACHINE)/boot/compressed/decompress.bin \
$(MACHINE)/boot/compressed/piggy.gz \
$(MACHINE)/boot/rescue/rescue.bin
$(boot)/zImage \
$(boot)/compressed/decompress.bin \
$(boot)/compressed/piggy.gz \
$(boot)/rescue/rescue.bin
# MRPROPER_FILES +=
......
arch/cris/arch-v10/boot/Makefile 已删除 100644 → 0
浏览文件 @ 5872144f
#
# arch/cris/arch-v10/boot/Makefile
#
OBJCOPYFLAGS = -O binary --remove-section=.bss
subdir- := compressed rescue
targets := Image
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: $(obj)/Image FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
$(obj)/zImage: $(obj)/compressed/vmlinux
@cp $< $@
@echo ' Kernel: $@ is ready'
arch/cris/arch-v10/boot/compressed/README 已删除 100644 → 0
浏览文件 @ 5872144f
Creation of the self-extracting compressed kernel image (vmlinuz)
-----------------------------------------------------------------
$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
This can be slightly confusing because it's a process with many steps.
The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
by that makefile into text and data binary files, vmlinux.text and
vmlinux.data.
Those files together with a ROM filesystem can be catted together and
burned into a flash or executed directly at the DRAM origin.
They can also be catted together and compressed with gzip, which is what
happens in this makefile. Together they make up piggy.img.
The decompressor is built into the file decompress.o. It is turned into
the binary file decompress.bin, which is catted together with piggy.img
into the file vmlinuz. It can be executed in an arbitrary place in flash.
Be careful - it assumes some things about free locations in DRAM. It
assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
so it puts its code at 0x40700000, and initial stack at 0x40800000.
-Bjorn
arch/cris/arch-v10/boot/compressed/misc.c 已删除 100644 → 0
浏览文件 @ 5872144f
/*
* misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
/* where the piggybacked kernel image expects itself to live.
* it is the same address we use when we network load an uncompressed
* image into DRAM, and it is the address the kernel is linked to live
* at by vmlinux.lds.S
*/
#define KERNEL_LOAD_ADR 0x40004000
#include <linux/types.h>
#include <arch/svinto.h>
/*
* gzip declarations
*/
#define OF(args) args
#define STATIC static
void *memset(void *s, int c, size_t n);
void *memcpy(void *__dest, __const void *__src, size_t __n);
#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x8000 /* Window size must be at least 32k, */
/* and a power of two */
static uch *inbuf; /* input buffer */
static uch window[WSIZE]; /* Sliding window buffer */
unsigned inptr = 0; /* index of next byte to be processed in inbuf
* After decompression it will contain the
* compressed size, and head.S will read it.
*/
static unsigned outcnt = 0; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond, msg) do { \
if (!(cond)) \
error(msg); \
} while (0)
# define Trace(x) fprintf x
# define Tracev(x) do { \
if (verbose) \
fprintf x; \
} while (0)
# define Tracevv(x) do { \
if (verbose > 1) \
fprintf x; \
} while (0)
# define Tracec(c, x) do { \
if (verbose && (c)) \
fprintf x; \
} while (0)
# define Tracecv(c, x) do { \
if (verbose > 1 && (c)) \
fprintf x; \
} while (0)
#else
# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c, x)
# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
extern char *input_data; /* lives in head.S */
static long bytes_out = 0;
static uch *output_data;
static unsigned long output_ptr = 0;
static void puts(const char *);
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
static long free_mem_ptr = (long)&_end;
static long free_mem_end_ptr;
#include "../../../../../lib/inflate.c"
/* decompressor info and error messages to serial console */
static void
puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
*R_SERIAL0_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
*R_SERIAL1_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
*R_SERIAL2_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
*R_SERIAL3_TR_DATA = *s++;
#endif
}
#endif
}
void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char *)s;
for (i = 0; i < n; i++)
ss[i] = c;
return s;
}
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i = 0; i < __n; i++)
d[i] = s[i];
return __dest;
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out = *in;
out++;
in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void error(char *x)
{
puts("\n\n");
puts(x);
puts("\n\n -- System halted\n");
while (1); /* Halt */
}
void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
void decompress_kernel(void)
{
char revision;
/* input_data is set in head.S */
inbuf = input_data;
#ifdef CONFIG_ETRAX_DEBUG_PORT0
*R_SERIAL0_XOFF = 0;
*R_SERIAL0_BAUD = 0x99;
*R_SERIAL0_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
*R_SERIAL1_XOFF = 0;
*R_SERIAL1_BAUD = 0x99;
*R_SERIAL1_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
*R_GEN_CONFIG = 0x08;
*R_SERIAL2_XOFF = 0;
*R_SERIAL2_BAUD = 0x99;
*R_SERIAL2_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
*R_GEN_CONFIG = 0x100;
*R_SERIAL3_XOFF = 0;
*R_SERIAL3_BAUD = 0x99;
*R_SERIAL3_TR_CTRL = 0x40;
#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < 10) {
puts("You need an ETRAX 100LX to run linux 2.6\n");
while (1);
}
puts("Uncompressing Linux...\n");
gunzip();
puts("Done. Now booting the kernel.\n");
}
arch/cris/arch-v10/kernel/entry.S
浏览文件 @ 1079cac0
......@@ -536,10 +536,10 @@ multiple_interrupt:
movem $r13, [$sp]
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
move.d $sp, $r10
jsr do_multiple_IRQ
jump ret_from_intr
do_sigtrap:
......@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
pop $r0 ; Restore r0.
ba do_sigtrap ; SIGTRAP the offending process.
pop $dccr ; Restore dccr in delay slot.
.global kernel_execve
kernel_execve:
move.d __NR_execve, $r9
......@@ -929,6 +929,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
.long sys_signalfd4
.long sys_eventfd2
.long sys_epoll_create1
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
......
arch/cris/arch-v32/boot/compressed/Makefile 已删除 100644 → 0
浏览文件 @ 5872144f
#
# arch/cris/arch-v32/boot/compressed/Makefile
#
asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
ldflags-y += -T$(srctree)/$(src)/decompress.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
targets := vmlinux piggy.gz decompress.o decompress.bin
$(obj)/decompress.o: $(OBJECTS) FORCE
$(call if_changed,ld)
$(obj)/decompress.bin: $(obj)/decompress.o FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(call if_changed,image)
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)
arch/cris/arch-v32/boot/rescue/Makefile 已删除 100644 → 0
浏览文件 @ 5872144f
#
# Makefile for rescue (bootstrap) code
#
CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-I $(srctree)/include/asm/arch
asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
LD = gcc-cris -mlinux -march=v32 -nostdlib
ldflags-y += -T $(srctree)/$(src)/rescue.lds
LDPOSTFLAGS = -lgcc
OBJCOPYFLAGS = -O binary --remove-section=.bss
obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
OBJECT := $(obj)/head.o
targets := rescue.o rescue.bin
quiet_cmd_ldlibgcc = LD $@
cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
$(obj)/rescue.o: $(OBJECTS) FORCE
$(call if_changed,ldlibgcc)
$(obj)/rescue.bin: $(obj)/rescue.o FORCE
$(call if_changed,objcopy)
cp -p $(obj)/rescue.bin $(objtree)
arch/cris/arch-v32/drivers/mach-a3/gpio.c
浏览文件 @ 1079cac0
......@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
spin_lock_irqrestore(&gpio_lock, flags);
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
......@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
spin_lock_irqrestore(&gpio_lock, flags);
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
......
arch/cris/arch-v32/kernel/Makefile
浏览文件 @ 1079cac0
......@@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \
process.o ptrace.o setup.o signal.o traps.o time.o \
cache.o cacheflush.o
obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
......
arch/cris/arch-v32/kernel/entry.S
浏览文件 @ 1079cac0
......@@ -852,6 +852,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
.long sys_signalfd4
.long sys_eventfd2
.long sys_epoll_create1
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
......
arch/cris/arch-v32/boot/Makefile → arch/cris/boot/Makefile
浏览文件 @ 1079cac0
#
# arch/cris/arch-v32/boot/Makefile
# arch/cris/boot/Makefile
#
OBJCOPYFLAGS = -O binary -R .note -R .comment
objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
OBJCOPYFLAGS = -O binary $(objcopyflags-y)
subdir- := compressed rescue
targets := Image
......
arch/cris/arch-v10/boot/compressed/Makefile → arch/cris/boot/compressed/Makefile
浏览文件 @ 1079cac0
#
# arch/cris/arch-v10/boot/compressed/Makefile
# arch/cris/boot/compressed/Makefile
#
asflags-y += $(LINUXINCLUDE)
ccflags-y += -O2 $(LINUXINCLUDE)
ldflags-y += -T $(srctree)/$(src)/decompress.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
# -I$(srctree)/include/asm/arch
# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
# -I$(srctree)/include/asm/arch
arch-$(CONFIG_ETRAX_ARCH_V10) = v10
arch-$(CONFIG_ETRAX_ARCH_V32) = v32
ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
OBJECTS= $(OBJECTS-y) $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
......@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)
arch/cris/arch-v10/boot/compressed/head.S → arch/cris/boot/compressed/head_v10.S
浏览文件 @ 1079cac0
......@@ -30,7 +30,7 @@
beq dram_init_finished
nop
#include "../../lib/dram_init.S"
#include "../../arch-v10/lib/dram_init.S"
dram_init_finished:
......@@ -123,4 +123,4 @@ _cmd_line_magic:
.dword 0
_cmd_line_addr:
.dword 0
#include "../../lib/hw_settings.S"
#include "../../arch-v10/lib/hw_settings.S"
arch/cris/arch-v32/boot/compressed/head.S → arch/cris/boot/compressed/head_v32.S
浏览文件 @ 1079cac0
......@@ -17,7 +17,7 @@
.globl input_data
.text
_start:
start:
di
;; Start clocks for used blocks.
......@@ -29,9 +29,9 @@ _start:
nop
#if defined CONFIG_ETRAXFS
#include "../../mach-fs/dram_init.S"
#include "../../arch-v32/mach-fs/dram_init.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
#include "../../mach-a3/dram_init.S"
#include "../../arch-v32/mach-a3/dram_init.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
......@@ -137,9 +137,9 @@ _boot_source:
.dword 0
#if defined CONFIG_ETRAXFS
#include "../../mach-fs/hw_settings.S"
#include "../../arch-v32/mach-fs/hw_settings.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
#include "../../mach-a3/hw_settings.S"
#include "../../arch-v32/mach-a3/hw_settings.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
arch/cris/arch-v32/boot/compressed/misc.c → arch/cris/boot/compressed/misc.c
浏览文件 @ 1079cac0
......@@ -18,8 +18,9 @@
#define KERNEL_LOAD_ADR 0x40004000
#include <linux/types.h>
#ifdef CONFIG_ETRAX_ARCH_V32
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
......@@ -27,6 +28,9 @@
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#include <hwregs/clkgen_defs.h>
#endif
#else
#include <arch/svinto.h>
#endif
/*
* gzip declarations
......@@ -35,12 +39,10 @@
#define OF(args) args
#define STATIC static
void* memset(void* s, int c, size_t n);
void* memcpy(void* __dest, __const void* __src,
size_t __n);
#define memzero(s, n) memset ((s), 0, (n))
void *memset(void *s, int c, size_t n);
void *memcpy(void *__dest, __const void *__src, size_t __n);
#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
......@@ -68,27 +70,43 @@ static unsigned outcnt = 0; /* bytes in output buffer */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() inbuf[inptr++]
#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Assert(cond, msg) do { \
if (!(cond)) \
error(msg); \
} while (0)
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
# define Tracev(x) do { \
if (verbose) \
fprintf x; \
} while (0)
# define Tracevv(x) do { \
if (verbose > 1) \
fprintf x; \
} while (0)
# define Tracec(c, x) do { \
if (verbose && (c)) \
fprintf x; \
} while (0)
# define Tracecv(c, x) do { \
if (verbose > 1 && (c)) \
fprintf x; \
} while (0)
#else
# define Assert(cond,msg)
# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
# define Tracec(c, x)
# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
static void puts(const char *);
extern char *input_data; /* lives in head.S */
......@@ -96,10 +114,6 @@ static long bytes_out;
static uch *output_data;
static unsigned long output_ptr;
static void error(char *m);
static void puts(const char *);
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
......@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
/* decompressor info and error messages to serial console */
static inline void
serout(const char *s, reg_scope_instances regi_ser)
#ifdef CONFIG_ETRAX_ARCH_V32
static inline void serout(const char *s, reg_scope_instances regi_ser)
{
reg_ser_rs_stat_din rs;
reg_ser_rw_dout dout = {.data = *s};
......@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_dout, dout);
}
#endif
static void
puts(const char *s)
static void puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser0);
#else
while (!(*R_SERIAL0_STATUS & (1 << 5)))
;
*R_SERIAL0_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser1);
#else
while (!(*R_SERIAL1_STATUS & (1 << 5)))
;
*R_SERIAL1_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser2);
#else
while (!(*R_SERIAL2_STATUS & (1 << 5)))
;
*R_SERIAL2_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser3);
#else
while (!(*R_SERIAL3_STATUS & (1 << 5)))
;
*R_SERIAL3_TR_DATA = *s++;
#endif
#endif
*s++;
}
......@@ -147,8 +185,7 @@ puts(const char *s)
#endif
}
void*
memset(void* s, int c, size_t n)
void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char*)s;
......@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
return s;
}
void*
memcpy(void* __dest, __const void* __src,
size_t __n)
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i=0;i<__n;i++) d[i] = s[i];
for (i = 0; i < __n; i++)
d[i] = s[i];
return __dest;
}
......@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
* (Used for the decompressed data only.)
*/
static void
flush_window()
static void flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out++ = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out = *in;
out++;
in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void
error(char *x)
static void error(char *x)
{
puts("\r\n\n");
puts("\n\n");
puts(x);
puts("\r\n\n -- System halted\n");
puts("\n\n -- System halted\n");
while(1); /* Halt */
}
void
setup_normal_output_buffer(void)
void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
static inline void
serial_setup(reg_scope_instances regi_ser)
#ifdef CONFIG_ETRAX_ARCH_V32
static inline void serial_setup(reg_scope_instances regi_ser)
{
reg_ser_rw_xoff xoff;
reg_ser_rw_tr_ctrl tr_ctrl;
......@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
}
#endif
void
decompress_kernel(void)
void decompress_kernel(void)
{
char revision;
char compile_rev;
#ifdef CONFIG_ETRAX_ARCH_V32
/* Need at least a CRISv32 to run. */
compile_rev = 32;
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
......@@ -277,6 +316,7 @@ decompress_kernel(void)
hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT0
serial_setup(regi_ser0);
#endif
......@@ -300,19 +340,52 @@ decompress_kernel(void)
/* input_data is set in head.S */
inbuf = input_data;
#else /* CRISv10 */
/* Need at least a crisv10 to run. */
compile_rev = 10;
/* input_data is set in head.S */
inbuf = input_data;
#ifdef CONFIG_ETRAX_DEBUG_PORT0
*R_SERIAL0_XOFF = 0;
*R_SERIAL0_BAUD = 0x99;
*R_SERIAL0_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
*R_SERIAL1_XOFF = 0;
*R_SERIAL1_BAUD = 0x99;
*R_SERIAL1_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
*R_GEN_CONFIG = 0x08;
*R_SERIAL2_XOFF = 0;
*R_SERIAL2_BAUD = 0x99;
*R_SERIAL2_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
*R_GEN_CONFIG = 0x100;
*R_SERIAL3_XOFF = 0;
*R_SERIAL3_BAUD = 0x99;
*R_SERIAL3_TR_CTRL = 0x40;
#endif
#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < 32)
{
puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
if (revision < compile_rev) {
#ifdef CONFIG_ETRAX_ARCH_V32
puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
#else
puts("You need an ETRAX 100LX to run linux 2.6\n");
#endif
while(1);
}
puts("Uncompressing Linux...\r\n");
puts("Uncompressing Linux...\n");
gunzip();
puts("Done. Now booting the kernel.\r\n");
puts("Done. Now booting the kernel\n");
}
arch/cris/arch-v10/boot/rescue/Makefile → arch/cris/boot/rescue/Makefile
浏览文件 @ 1079cac0
......@@ -2,16 +2,26 @@
# Makefile for rescue (bootstrap) code
#
ccflags-y += -O2 $(LINUXINCLUDE)
# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
# -I$(srctree)/include/asm/arch
# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
# LD = gcc-cris -mlinux -march=v32 -nostdlib
asflags-y += $(LINUXINCLUDE)
ldflags-y += -T $(srctree)/$(src)/rescue.lds
ccflags-y += -O2 $(LINUXINCLUDE)
arch-$(CONFIG_ETRAX_ARCH_V10) = v10
arch-$(CONFIG_ETRAX_ARCH_V32) = v32
ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
OBJCOPYFLAGS = -O binary --remove-section=.bss
obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
OBJECT := $(obj)/head.o
obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
OBJECTS := $(obj-y)
targets := rescue.o rescue.bin
$(obj)/rescue.o: $(OBJECT) FORCE
$(obj)/rescue.o: $(OBJECTS) FORCE
$(call if_changed,ld)
$(obj)/rescue.bin: $(obj)/rescue.o FORCE
......@@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
rm tr.bin tmp2423 testrescue_tmp.bin
$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
# Pad it to 784 bytes, that's what the rescue loader expects
......@@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
cat ktr.bin tmp2423 >kimagerescue_tmp.bin
dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
rm ktr.bin tmp2423 kimagerescue_tmp.bin
arch/cris/arch-v10/boot/rescue/head.S → arch/cris/boot/rescue/head_v10.S
浏览文件 @ 1079cac0
......@@ -155,7 +155,7 @@ no_newjump:
#endif
;; We need to setup the bus registers before we start using the DRAM
#include "../../lib/dram_init.S"
#include "../../../arch-v10/lib/dram_init.S"
;; we now should go through the checksum-table and check the listed
;; partitions for errors.
......
arch/cris/include/asm/unistd.h
浏览文件 @ 1079cac0
......@@ -281,7 +281,7 @@
#define __NR_mbind 274
#define __NR_get_mempolicy 275
#define __NR_set_mempolicy 276
#define __NR_mq_open 277
#define __NR_mq_open 277
#define __NR_mq_unlink (__NR_mq_open+1)
#define __NR_mq_timedsend (__NR_mq_open+2)
#define __NR_mq_timedreceive (__NR_mq_open+3)
......@@ -331,10 +331,18 @@
#define __NR_fallocate 324
#define __NR_timerfd_settime 325
#define __NR_timerfd_gettime 326
#define __NR_signalfd4 327
#define __NR_eventfd2 328
#define __NR_epoll_create1 329
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
#define __NR_preadv 333
#define __NR_pwritev 334
#ifdef __KERNEL__
#define NR_syscalls 327
#define NR_syscalls 335
#include <arch/unistd.h>
......
arch/microblaze/kernel/cpu/cpuinfo-static.c
浏览文件 @ 1079cac0
......@@ -14,8 +14,8 @@
#include <asm/cpuinfo.h>
#include <asm/pvr.h>
const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
#define err_printk(x) \
early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
......
arch/microblaze/kernel/sys_microblaze.c
浏览文件 @ 1079cac0
......@@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
break;
}
return -EINVAL;
return ret;
}
asmlinkage int sys_vfork(struct pt_regs *regs)
......
arch/mips/Kconfig
浏览文件 @ 1079cac0
......@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
config PAGE_SIZE_8KB
bool "8kB"
depends on EXPERIMENTAL && CPU_R8000
depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
help
Using 8kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
only on the R8000 processor. Not that at the time of this writing
this option is still high experimental; there are also issues with
compatibility of user applications.
only on R8000 and cnMIPS processors. Note that you will need a
suitable Linux distribution to support this.
config PAGE_SIZE_16KB
bool "16kB"
......@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
all non-R3000 family processors. Note that you will need a suitable
Linux distribution to support this.
config PAGE_SIZE_32KB
bool "32kB"
depends on CPU_CAVIUM_OCTEON
help
Using 32kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
only on cnMIPS cores. Note that you will need a suitable Linux
distribution to support this.
config PAGE_SIZE_64KB
bool "64kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
......@@ -1958,10 +1966,6 @@ config SECCOMP
endmenu
config RWSEM_GENERIC_SPINLOCK
bool
default y
config LOCKDEP_SUPPORT
bool
default y
......
arch/mips/Makefile
浏览文件 @ 1079cac0
......@@ -14,8 +14,6 @@
KBUILD_DEFCONFIG := ip22_defconfig
cflags-y := -ffunction-sections
#
# Select the object file format to substitute into the linker script.
#
......@@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
endif
endif
cflags-y := -ffunction-sections
cflags-y += $(call cc-option, -mno-check-zero-division)
ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
......
arch/mips/alchemy/common/time.c
浏览文件 @ 1079cac0
......@@ -44,7 +44,7 @@
extern int allow_au1k_wait; /* default off for CP0 Counter */
static cycle_t au1x_counter1_read(void)
static cycle_t au1x_counter1_read(struct clocksource *cs)
{
return au_readl(SYS_RTCREAD);
}
......
arch/mips/cavium-octeon/csrc-octeon.c
浏览文件 @ 1079cac0
......@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
local_irq_restore(flags);
}
static cycle_t octeon_cvmcount_read(void)
static cycle_t octeon_cvmcount_read(struct clocksource *cs)
{
return read_c0_cvmcount();
}
......
arch/mips/include/asm/bitops.h
浏览文件 @ 1079cac0
......@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
int num;
if (BITS_PER_LONG == 32 &&
__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__(
" .set push \n"
" .set mips32 \n"
......@@ -644,7 +644,7 @@ static inline int fls(int x)
{
int r;
if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__("clz %0, %1" : "=r" (x) : "r" (x));
return 32 - x;
......
arch/mips/include/asm/checksum.h
浏览文件 @ 1079cac0
......@@ -40,7 +40,7 @@ static inline
__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
__wsum sum, int *err_ptr)
{
might_sleep();
might_fault();
return __csum_partial_copy_user((__force void *)src, dst,
len, sum, err_ptr);
}
......@@ -53,7 +53,7 @@ static inline
__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
__wsum sum, int *err_ptr)
{
might_sleep();
might_fault();
if (access_ok(VERIFY_WRITE, dst, len))
return __csum_partial_copy_user(src, (__force void *)dst,
len, sum, err_ptr);
......
arch/mips/include/asm/compat.h
浏览文件 @ 1079cac0
......@@ -3,7 +3,6 @@
/*
* Architecture specific compatibility types
*/
#include <linux/seccomp.h>
#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
......
arch/mips/include/asm/cpu-features.h
浏览文件 @ 1079cac0
......@@ -147,6 +147,15 @@
#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
cpu_has_mips64r1 | cpu_has_mips64r2)
/*
* MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
* pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels
* cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
*/
# ifndef cpu_has_clo_clz
# define cpu_has_clo_clz cpu_has_mips_r
# endif
#ifndef cpu_has_dsp
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
#endif
......
arch/mips/include/asm/div64.h
浏览文件 @ 1079cac0
......@@ -6,105 +6,63 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_DIV64_H
#define _ASM_DIV64_H
#ifndef __ASM_DIV64_H
#define __ASM_DIV64_H
#include <linux/types.h>
#include <asm-generic/div64.h>
#if (_MIPS_SZLONG == 32)
#if BITS_PER_LONG == 64
#include <asm/compiler.h>
#include <linux/types.h>
/*
* No traps on overflows for any of these...
*/
#define do_div64_32(res, high, low, base) ({ \
unsigned long __quot32, __mod32; \
unsigned long __cf, __tmp, __tmp2, __i; \
\
__asm__(".set push\n\t" \
".set noat\n\t" \
".set noreorder\n\t" \
"move %2, $0\n\t" \
"move %3, $0\n\t" \
"b 1f\n\t" \
" li %4, 0x21\n" \
"0:\n\t" \
"sll $1, %0, 0x1\n\t" \
"srl %3, %0, 0x1f\n\t" \
"or %0, $1, %5\n\t" \
"sll %1, %1, 0x1\n\t" \
"sll %2, %2, 0x1\n" \
"1:\n\t" \
"bnez %3, 2f\n\t" \
" sltu %5, %0, %z6\n\t" \
"bnez %5, 3f\n" \
"2:\n\t" \
" addiu %4, %4, -1\n\t" \
"subu %0, %0, %z6\n\t" \
"addiu %2, %2, 1\n" \
"3:\n\t" \
"bnez %4, 0b\n\t" \
" srl %5, %1, 0x1f\n\t" \
".set pop" \
: "=&r" (__mod32), "=&r" (__tmp), \
"=&r" (__quot32), "=&r" (__cf), \
"=&r" (__i), "=&r" (__tmp2) \
: "Jr" (base), "0" (high), "1" (low)); \
\
(res) = __quot32; \
__mod32; })
#define do_div(n, base) ({ \
unsigned long long __quot; \
unsigned long __mod; \
unsigned long long __div; \
unsigned long __upper, __low, __high, __base; \
\
__div = (n); \
__base = (base); \
\
__high = __div >> 32; \
__low = __div; \
__upper = __high; \
\
if (__high) \
__asm__("divu $0, %z2, %z3" \
: "=h" (__upper), "=l" (__high) \
: "Jr" (__high), "Jr" (__base) \
: GCC_REG_ACCUM); \
\
__mod = do_div64_32(__low, __upper, __low, __base); \
\
__quot = __high; \
__quot = __quot << 32 | __low; \
(n) = __quot; \
__mod; })
#endif /* (_MIPS_SZLONG == 32) */
#if (_MIPS_SZLONG == 64)
/*
* Hey, we're already 64-bit, no
* need to play games..
*/
#define do_div(n, base) ({ \
unsigned long __quot; \
unsigned int __mod; \
unsigned long __div; \
unsigned int __base; \
\
__div = (n); \
__base = (base); \
\
__mod = __div % __base; \
__quot = __div / __base; \
\
(n) = __quot; \
__mod; })
#define __div64_32(n, base) \
({ \
unsigned long __cf, __tmp, __tmp2, __i; \
unsigned long __quot32, __mod32; \
unsigned long __high, __low; \
unsigned long long __n; \
\
__high = *__n >> 32; \
__low = __n; \
__asm__( \
" .set push \n" \
" .set noat \n" \
" .set noreorder \n" \
" move %2, $0 \n" \
" move %3, $0 \n" \
" b 1f \n" \
" li %4, 0x21 \n" \
"0: \n" \
" sll $1, %0, 0x1 \n" \
" srl %3, %0, 0x1f \n" \
" or %0, $1, %5 \n" \
" sll %1, %1, 0x1 \n" \
" sll %2, %2, 0x1 \n" \
"1: \n" \
" bnez %3, 2f \n" \
" sltu %5, %0, %z6 \n" \
" bnez %5, 3f \n" \
"2: \n" \
" addiu %4, %4, -1 \n" \
" subu %0, %0, %z6 \n" \
" addiu %2, %2, 1 \n" \
"3: \n" \
" bnez %4, 0b\n\t" \
" srl %5, %1, 0x1f\n\t" \
" .set pop" \
: "=&r" (__mod32), "=&r" (__tmp), \
"=&r" (__quot32), "=&r" (__cf), \
"=&r" (__i), "=&r" (__tmp2) \
: "Jr" (base), "0" (__high), "1" (__low)); \
\
(__n) = __quot32; \
__mod32; \
})
#endif /* (_MIPS_SZLONG == 64) */
#endif /* BITS_PER_LONG == 64 */
#endif /* _ASM_DIV64_H */
#endif /* __ASM_DIV64_H */
arch/mips/include/asm/dma-mapping.h
浏览文件 @ 1079cac0
......@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction);
extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction direction);
extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
size_t size, enum dma_data_direction direction);
static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
size_t size, enum dma_data_direction direction)
{
dma_unmap_single(dev, dma_address, size, direction);
}
extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries, enum dma_data_direction direction);
extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
......
arch/mips/include/asm/fixmap.h
浏览文件 @ 1079cac0
......@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
return __virt_to_fix(vaddr);
}
#define kmap_get_fixmap_pte(vaddr) \
pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
/*
* Called from pgtable_init()
*/
......
arch/mips/include/asm/hazards.h
浏览文件 @ 1079cac0
......@@ -138,8 +138,9 @@ do { \
__instruction_hazard(); \
} while (0)
#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
......
arch/mips/include/asm/highmem.h
浏览文件 @ 1079cac0
......@@ -30,8 +30,6 @@
/* declarations for highmem.c */
extern unsigned long highstart_pfn, highend_pfn;
extern pte_t *kmap_pte;
extern pgprot_t kmap_prot;
extern pte_t *pkmap_page_table;
/*
......@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
#define flush_cache_kmaps() flush_cache_all()
extern void kmap_init(void);
#define kmap_prot PAGE_KERNEL
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
arch/mips/include/asm/mach-au1x00/au1000.h
浏览文件 @ 1079cac0
......@@ -715,7 +715,7 @@ enum soc_au1500_ints {
#ifdef CONFIG_SOC_AU1100
enum soc_au1100_ints {
AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
AU1100_UART0_INT,
AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
......@@ -902,8 +902,8 @@ enum soc_au1200_ints {
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
AU1200_NAND_INT = AU1200_FIRST_INT + 23,
AU1200_GPIO_203,
AU1200_NAND_INT,
AU1200_GPIO_204,
AU1200_GPIO_205,
AU1200_GPIO_206,
......
arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
浏览文件 @ 1079cac0
......@@ -46,20 +46,6 @@
#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
#ifdef CONFIG_PM
/*
* This will enable the device to be powered up when write() or read()
* is called. If this is not defined, the driver will return -EBUSY.
*/
#define WAKE_ON_ACCESS 1
typedef struct {
spinlock_t lock; /* Used to block on state transitions */
au1xxx_power_dev_t *dev; /* Power Managers device structure */
unsigned stopped; /* Used to signal device is stopped */
} pm_state;
#endif
typedef struct {
u32 tx_dev_id, rx_dev_id, target_dev_id;
u32 tx_chan, rx_chan;
......@@ -72,9 +58,6 @@ typedef struct {
#endif
int irq;
u32 regbase;
#ifdef CONFIG_PM
pm_state pm;
#endif
} _auide_hwif;
/******************************************************************************/
......
arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h 0 → 100644
浏览文件 @ 1079cac0
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
* Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
* Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
*
* reference: /proc/cpuinfo,
* arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
* arch/mips/kernel/proc.c(show_cpuinfo),
* loongson2f user manual.
*/
#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 32
#define cpu_has_32fpr 1
#define cpu_has_3k_cache 0
#define cpu_has_4k_cache 1
#define cpu_has_4kex 1
#define cpu_has_64bits 1
#define cpu_has_cache_cdex_p 0
#define cpu_has_cache_cdex_s 0
#define cpu_has_counter 1
#define cpu_has_dc_aliases 1
#define cpu_has_divec 0
#define cpu_has_dsp 0
#define cpu_has_ejtag 0
#define cpu_has_fpu 1
#define cpu_has_ic_fills_f_dc 0
#define cpu_has_inclusive_pcaches 1
#define cpu_has_llsc 1
#define cpu_has_mcheck 0
#define cpu_has_mdmx 0
#define cpu_has_mips16 0
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
#define cpu_has_mips3d 0
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_mipsmt 0
#define cpu_has_prefetch 0
#define cpu_has_smartmips 0
#define cpu_has_tlb 1
#define cpu_has_tx39_cache 0
#define cpu_has_userlocal 0
#define cpu_has_vce 0
#define cpu_has_vtag_icache 0
#define cpu_has_watch 1
#define cpu_icache_snoops_remote_store 1
#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
arch/mips/include/asm/mipsregs.h
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/include/asm/page.h
浏览文件 @ 1079cac0
......@@ -23,6 +23,9 @@
#ifdef CONFIG_PAGE_SIZE_16KB
#define PAGE_SHIFT 14
#endif
#ifdef CONFIG_PAGE_SIZE_32KB
#define PAGE_SHIFT 15
#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PAGE_SHIFT 16
#endif
......
arch/mips/include/asm/pgtable-64.h
浏览文件 @ 1079cac0
......@@ -83,6 +83,12 @@
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_32KB
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
......
arch/mips/include/asm/sn/addrs.h
浏览文件 @ 1079cac0
......@@ -359,11 +359,11 @@
TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size
#define NMI_OFFSET(nasid, slice) \
#define SN_NMI_OFFSET(nasid, slice) \
(KLD_NMI(nasid)->offset + \
KLD_NMI(nasid)->stride * (slice))
#define NMI_ADDR(nasid, slice) \
TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset
......
arch/mips/include/asm/sn/nmi.h
浏览文件 @ 1079cac0
......@@ -3,13 +3,13 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
*
* Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
*/
#ifndef __ASM_SN_NMI_H
#define __ASM_SN_NMI_H
#ident "$Revision: 1.5 $"
#include <asm/sn/addrs.h>
/*
......
arch/mips/include/asm/thread_info.h
浏览文件 @ 1079cac0
......@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
#ifdef CONFIG_PAGE_SIZE_16KB
#define THREAD_SIZE_ORDER (0)
#endif
#ifdef CONFIG_PAGE_SIZE_32KB
#define THREAD_SIZE_ORDER (0)
#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define THREAD_SIZE_ORDER (0)
#endif
......
arch/mips/include/asm/time.h
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/include/asm/uaccess.h
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/kernel/cevt-smtc.c
浏览文件 @ 1079cac0
......@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
}
int __cpuinit mips_clockevent_init(void)
int __cpuinit smtc_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
......
arch/mips/kernel/scall64-n32.S
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/kernel/scall64-o32.S
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/kernel/unaligned.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/lib/dump_tlb.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/mm/c-r4k.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/mm/dma-default.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/mm/highmem.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/mm/init.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/mm/sc-rm7k.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/pmc-sierra/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/sgi-ip32/ip32-berr.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/sgi-ip32/ip32-irq.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/sibyte/bcm1480/irq.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/sibyte/sb1250/irq.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/mips/txx9/rbtx4939/setup.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/boot/Makefile
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/boot/mktree.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/configs/c2k_defconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/include/asm/system.h
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/kernel/cputable.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/kernel/machine_kexec.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/kernel/pci-common.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/kernel/pci_64.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/kernel/prom.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/mm/mem.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/platforms/40x/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/platforms/44x/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/platforms/cell/ras.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/sysdev/fsl_soc.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/sysdev/mpic.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/powerpc/sysdev/xilinx_intc.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/kernel/e820.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/kernel/kgdb.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/kernel/machine_kexec_32.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/kernel/machine_kexec_64.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/kvm/svm.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/kvm/x86.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/mm/init.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/mm/srat_32.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/mm/srat_64.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/x86/xen/mmu.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/configs/s6105_defconfig
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/include/asm/checksum.h
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/include/asm/timex.h
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/kernel/Makefile
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/kernel/traps.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/kernel/vmlinux.lds.S
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/platforms/s6105/setup.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/variants/s6000/Makefile
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/variants/s6000/delay.c 0 → 100644
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/variants/s6000/gpio.c
浏览文件 @ 1079cac0
此差异已折叠。
arch/xtensa/variants/s6000/include/variant/gpio.h 0 → 100644
浏览文件 @ 1079cac0
此差异已折叠。
block/blk-core.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/ata_piix.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/libata-core.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/libata-eh.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/libata-scsi.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/pata_pdc202xx_old.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/sata_fsl.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/sata_mv.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/ata/sata_sx4.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/base/iommu.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/base/platform.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/char/random.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/char/sysrq.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/char/vt_ioctl.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/dma/dmaengine.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/dma/dmatest.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/dma/ioat_dma.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/dma/ipu/ipu_idmac.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/i915_dma.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/i915_drv.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/i915_gem.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/i915_reg.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/i915_suspend.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_crt.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_drv.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_fb.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_hdmi.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_i2c.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/gpu/drm/i915/intel_modes.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/hid/hid-ids.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/hid/usbhid/hid-core.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/hid/usbhid/hid-quirks.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/hwmon/asus_atk0110.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/hwmon/w83781d.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/i2c/busses/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
drivers/i2c/busses/i2c-cpm.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/i2c/busses/i2c-mpc.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/i2c/busses/i2c-pxa.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/infiniband/hw/mlx4/mr.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/infiniband/hw/mlx4/qp.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/input/ff-memless.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/input/joydev.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/input/keyboard/atkbd.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/input/touchscreen/tsc2007.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/isdn/capi/capifs.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/md/bitmap.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/md/md.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/md/raid10.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/radio/radio-sf16fmi.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/video/cafe_ccic.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/video/ivtv/ivtv-irq.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/video/ivtv/ivtv-yuv.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/video/ivtv/ivtvfb.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/video/uvc/uvc_video.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/media/video/v4l2-ioctl.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/misc/isl29003.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/mtd/devices/m25p80.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/mtd/mtdcore.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/mtd/mtdsuper.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/arm/ixp4xx_eth.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/bnx2.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/bonding/bond_main.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/igb/igb_main.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/mlx4/en_rx.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/wan/ixp4xx_hss.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/wireless/airo.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/net/wireless/ath5k/base.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/pci/intel-iommu.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/pci/msi.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/pci/pcie/aer/aerdrv.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/pci/pcie/portdrv_pci.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/rtc/rtc-twl4030.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/scsi/osd/osd_uld.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/serial/jsm/jsm.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/serial/jsm/jsm_driver.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/serial/nwpserial.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/serial/s3c6400.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/serial/samsung.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/serial/samsung.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/spi/pxa2xx_spi.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/staging/comedi/TODO
浏览文件 @ 1079cac0
此差异已折叠。
drivers/staging/rt2870/rt2870.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/staging/rtl8187se/r8180.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/staging/winbond/wbusb.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/usb/Makefile
浏览文件 @ 1079cac0
此差异已折叠。
drivers/usb/atm/cxacru.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/usb/gadget/usbstring.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/usb/serial/ftdi_sio.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/usb/serial/ftdi_sio.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/usb/storage/unusual_devs.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/Makefile
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/cfbfillrect.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/fb_draw.h
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/gbefb.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/mx3fb.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/sysfillrect.c
浏览文件 @ 1079cac0
此差异已折叠。
drivers/video/via/viafbdev.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/9p/vfs_super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/affs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/afs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/btrfs/ctree.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/btrfs/disk-io.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/btrfs/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/btrfs/ioctl.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/btrfs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/CHANGES
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/README
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifs_dfs_ref.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifs_unicode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifs_unicode.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifsfs.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifsfs.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifsglob.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifsproto.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/cifssmb.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/connect.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/dir.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/file.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/link.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/misc.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/netmisc.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/nterr.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/ntlmssp.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/readdir.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/sess.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/cifs/smberr.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/dcache.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/devpts/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ecryptfs/main.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/eventpoll.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/exec.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ext4/extents.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ext4/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/fcntl.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/fuse/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/gfs2/glock.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/gfs2/ops_fstype.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/hpfs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/hugetlbfs/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/inode.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ioctl.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/libfs.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/lockd/svc.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/namei.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/namespace.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nfs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nfsd/nfs4recover.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nfsd/nfs4state.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nfsd/nfs4xdr.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/ioctl.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/mdt.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/nilfs.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/page.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/recovery.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/segment.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/nilfs2/segment.h
浏览文件 @ 1079cac0
此差异已折叠。
fs/notify/inotify/inotify_user.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ocfs2/symlink.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/open.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/proc/root.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/reiserfs/dir.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/reiserfs/namei.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/reiserfs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/reiserfs/xattr.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/reiserfs/xattr_security.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/romfs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/squashfs/Makefile
浏览文件 @ 1079cac0
此差异已折叠。
fs/squashfs/cache.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/squashfs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ubifs/super.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ufs/dir.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ufs/file.c
浏览文件 @ 1079cac0
此差异已折叠。
fs/ufs/ufs.h
浏览文件 @ 1079cac0
此差异已折叠。
include/asm-generic/bug.h
浏览文件 @ 1079cac0
此差异已折叠。
include/drm/i915_drm.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/Kbuild
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/ata.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/device.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/dmaengine.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/fs.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/namei.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/netfilter/xt_LED.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/nls.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/platform_device.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/reiserfs_fs_sb.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/reiserfs_xattr.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/romfs_fs.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/syscalls.h
浏览文件 @ 1079cac0
此差异已折叠。
include/linux/writeback.h
浏览文件 @ 1079cac0
此差异已折叠。
include/sound/version.h
浏览文件 @ 1079cac0
此差异已折叠。
init/initramfs.c
浏览文件 @ 1079cac0
此差异已折叠。
kernel/auditfilter.c
浏览文件 @ 1079cac0
此差异已折叠。
kernel/cgroup.c
浏览文件 @ 1079cac0
此差异已折叠。
kernel/kgdb.c
浏览文件 @ 1079cac0
此差异已折叠。
kernel/kprobes.c
浏览文件 @ 1079cac0
此差异已折叠。
kernel/panic.c
浏览文件 @ 1079cac0
此差异已折叠。
kernel/sysctl.c
浏览文件 @ 1079cac0
此差异已折叠。
lib/Kconfig.debug
浏览文件 @ 1079cac0
此差异已折叠。
mm/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
mm/madvise.c
浏览文件 @ 1079cac0
此差异已折叠。
mm/nommu.c
浏览文件 @ 1079cac0
此差异已折叠。
mm/oom_kill.c
浏览文件 @ 1079cac0
此差异已折叠。
mm/page_alloc.c
浏览文件 @ 1079cac0
此差异已折叠。
mm/pdflush.c
浏览文件 @ 1079cac0
此差异已折叠。
mm/vmalloc.c
浏览文件 @ 1079cac0
此差异已折叠。
net/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
net/bluetooth/hci_conn.c
浏览文件 @ 1079cac0
此差异已折叠。
net/bluetooth/hci_event.c
浏览文件 @ 1079cac0
此差异已折叠。
net/bluetooth/hci_sysfs.c
浏览文件 @ 1079cac0
此差异已折叠。
net/core/skbuff.c
浏览文件 @ 1079cac0
此差异已折叠。
net/ipv4/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
net/mac80211/rc80211_minstrel.c
浏览文件 @ 1079cac0
此差异已折叠。
net/mac80211/rc80211_pid_algo.c
浏览文件 @ 1079cac0
此差异已折叠。
net/mac80211/tx.c
浏览文件 @ 1079cac0
此差异已折叠。
net/netfilter/ipvs/ip_vs_conn.c
浏览文件 @ 1079cac0
此差异已折叠。
net/netfilter/ipvs/ip_vs_core.c
浏览文件 @ 1079cac0
此差异已折叠。
net/netfilter/xt_cluster.c
浏览文件 @ 1079cac0
此差异已折叠。
net/sched/sch_fifo.c
浏览文件 @ 1079cac0
此差异已折叠。
net/wimax/op-msg.c
浏览文件 @ 1079cac0
此差异已折叠。
net/wimax/stack.c
浏览文件 @ 1079cac0
此差异已折叠。
net/wireless/reg.c
浏览文件 @ 1079cac0
此差异已折叠。
net/wireless/scan.c
浏览文件 @ 1079cac0
此差异已折叠。
security/tomoyo/common.c
浏览文件 @ 1079cac0
此差异已折叠。
security/tomoyo/realpath.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/arm/pxa2xx-ac97-lib.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/drivers/pcsp/pcsp_mixer.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/drivers/serial-u16550.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/pci/riptide/riptide.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/pci/via82xx.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/soc/codecs/wm8990.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/soc/davinci/Kconfig
浏览文件 @ 1079cac0
此差异已折叠。
sound/soc/davinci/davinci-evm.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/soc/davinci/davinci-i2s.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/soc/davinci/davinci-pcm.c
浏览文件 @ 1079cac0
此差异已折叠。
sound/soc/soc-core.c
浏览文件 @ 1079cac0
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或