drm/nv50: clearer separation of the stages of evo init

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/nouveau_reg.h

@@ -747,15 +747,11 @@
 #define NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS                     0x00030000
 #define NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS_ACTIVE              0x00010000
 
-#define NV50_PDISPLAY_CTRL_STATE                                     0x00610300
-#define NV50_PDISPLAY_CTRL_STATE_PENDING                             0x80000000
-#define NV50_PDISPLAY_CTRL_STATE_METHOD                              0x00001ffc
-#define NV50_PDISPLAY_CTRL_STATE_ENABLE                              0x00000001
-#define NV50_PDISPLAY_CTRL_VAL                                       0x00610304
-#define NV50_PDISPLAY_UNK_380                                        0x00610380
-#define NV50_PDISPLAY_RAM_AMOUNT                                     0x00610384
-#define NV50_PDISPLAY_UNK_388                                        0x00610388
-#define NV50_PDISPLAY_UNK_38C                                        0x0061038c
+#define NV50_PDISPLAY_PIO_CTRL                                       0x00610300
+#define NV50_PDISPLAY_PIO_CTRL_PENDING                               0x80000000
+#define NV50_PDISPLAY_PIO_CTRL_MTHD                                  0x00001ffc
+#define NV50_PDISPLAY_PIO_CTRL_ENABLED                               0x00000001
+#define NV50_PDISPLAY_PIO_DATA                                       0x00610304
 
 #define NV50_PDISPLAY_CRTC_P(i, r)        ((i) * 0x540 + NV50_PDISPLAY_CRTC_##r)
 #define NV50_PDISPLAY_CRTC_C(i, r)    (4 + (i) * 0x540 + NV50_PDISPLAY_CRTC_##r)

drivers/gpu/drm/nouveau/nv50_display.c

@@ -225,6 +225,7 @@ nv50_display_init(struct drm_device *dev)
 	NV_DEBUG_KMS(dev, "\n");
 
 	nv_wr32(dev, 0x00610184, nv_rd32(dev, 0x00614004));
+
 	/*
 	 * I think the 0x006101XX range is some kind of main control area
 	 * that enables things.
@@ -240,16 +241,19 @@ nv50_display_init(struct drm_device *dev)
 		val = nv_rd32(dev, 0x0061610c + (i * 0x800));
 		nv_wr32(dev, 0x0061019c + (i * 0x10), val);
 	}
+
 	/* DAC */
 	for (i = 0; i < 3; i++) {
 		val = nv_rd32(dev, 0x0061a000 + (i * 0x800));
 		nv_wr32(dev, 0x006101d0 + (i * 0x04), val);
 	}
+
 	/* SOR */
 	for (i = 0; i < nv50_sor_nr(dev); i++) {
 		val = nv_rd32(dev, 0x0061c000 + (i * 0x800));
 		nv_wr32(dev, 0x006101e0 + (i * 0x04), val);
 	}
+
 	/* EXT */
 	for (i = 0; i < 3; i++) {
 		val = nv_rd32(dev, 0x0061e000 + (i * 0x800));
@@ -276,6 +280,49 @@ nv50_display_init(struct drm_device *dev)
 		}
 	}
 
+	for (i = 0; i < 2; i++) {
+		nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i), 0x2000);
+		if (!nv_wait(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
+			     NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS, 0)) {
+			NV_ERROR(dev, "timeout: CURSOR_CTRL2_STATUS == 0\n");
+			NV_ERROR(dev, "CURSOR_CTRL2 = 0x%08x\n",
+				 nv_rd32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i)));
+			return -EBUSY;
+		}
+
+		nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
+			NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_ON);
+		if (!nv_wait(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
+			     NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS,
+			     NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS_ACTIVE)) {
+			NV_ERROR(dev, "timeout: "
+				      "CURSOR_CTRL2_STATUS_ACTIVE(%d)\n", i);
+			NV_ERROR(dev, "CURSOR_CTRL2(%d) = 0x%08x\n", i,
+				 nv_rd32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i)));
+			return -EBUSY;
+		}
+	}
+
+	nv_wr32(dev, NV50_PDISPLAY_OBJECTS, (evo->ramin->vinst >> 8) | 9);
+	nv_wr32(dev, NV50_PDISPLAY_PIO_CTRL, 0x00000000);
+	nv_wr32(dev, 0x610028, 0x00000000);
+	nv_mask(dev, NV50_PDISPLAY_INTR_0, 0x00000000, 0x00000000);
+	nv_mask(dev, NV50_PDISPLAY_INTR_1, 0x00000000, 0x00000000);
+	nv_wr32(dev, NV50_PDISPLAY_INTR_EN,
+		     NV50_PDISPLAY_INTR_EN_CLK_UNK10 |
+		     NV50_PDISPLAY_INTR_EN_CLK_UNK20 |
+		     NV50_PDISPLAY_INTR_EN_CLK_UNK40);
+
+	/* enable hotplug interrupts */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct nouveau_connector *conn = nouveau_connector(connector);
+
+		if (conn->dcb->gpio_tag == 0xff)
+			continue;
+
+		pgpio->irq_enable(dev, conn->dcb->gpio_tag, true);
+	}
+
 	/* taken from nv bug #12637, attempts to un-wedge the hw if it's
 	 * stuck in some unspecified state
 	 */
@@ -297,7 +344,6 @@ nv50_display_init(struct drm_device *dev)
 		}
 	}
 
-	nv_wr32(dev, NV50_PDISPLAY_CTRL_STATE, NV50_PDISPLAY_CTRL_STATE_ENABLE);
 	nv_wr32(dev, NV50_PDISPLAY_CHANNEL_STAT(0), 0x1000b03);
 	if (!nv_wait(dev, NV50_PDISPLAY_CHANNEL_STAT(0),
 		     0x40000000, 0x40000000)) {
@@ -307,31 +353,6 @@ nv50_display_init(struct drm_device *dev)
 		return -EBUSY;
 	}
 
-	for (i = 0; i < 2; i++) {
-		nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i), 0x2000);
-		if (!nv_wait(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
-			     NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS, 0)) {
-			NV_ERROR(dev, "timeout: CURSOR_CTRL2_STATUS == 0\n");
-			NV_ERROR(dev, "CURSOR_CTRL2 = 0x%08x\n",
-				 nv_rd32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i)));
-			return -EBUSY;
-		}
-
-		nv_wr32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
-			NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_ON);
-		if (!nv_wait(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i),
-			     NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS,
-			     NV50_PDISPLAY_CURSOR_CURSOR_CTRL2_STATUS_ACTIVE)) {
-			NV_ERROR(dev, "timeout: "
-				      "CURSOR_CTRL2_STATUS_ACTIVE(%d)\n", i);
-			NV_ERROR(dev, "CURSOR_CTRL2(%d) = 0x%08x\n", i,
-				 nv_rd32(dev, NV50_PDISPLAY_CURSOR_CURSOR_CTRL2(i)));
-			return -EBUSY;
-		}
-	}
-
-	nv_wr32(dev, NV50_PDISPLAY_OBJECTS, (evo->ramin->vinst >> 8) | 9);
-
 	/* initialise fifo */
 	nv_wr32(dev, NV50_PDISPLAY_CHANNEL_DMA_CB(0),
 		((evo->pushbuf_bo->bo.mem.start << PAGE_SHIFT) >> 8) |
@@ -350,7 +371,9 @@ nv50_display_init(struct drm_device *dev)
 	nv_wr32(dev, NV50_PDISPLAY_USER_PUT(0), 0);
 	nv_wr32(dev, NV50_PDISPLAY_CHANNEL_STAT(0), 0x01000003 |
 		NV50_PDISPLAY_CHANNEL_STAT_DMA_ENABLED);
-	nv_wr32(dev, 0x610300, nv_rd32(dev, 0x610300) & ~1);
+
+	/* enable error reporting on the channel */
+	nv_mask(dev, 0x610028, 0x00000000, 0x00010001 << 0);
 
 	evo->dma.max = (4096/4) - 2;
 	evo->dma.put = 0;
@@ -382,21 +405,6 @@ nv50_display_init(struct drm_device *dev)
 	if (!nv_wait(dev, 0x640004, 0xffffffff, evo->dma.put << 2))
 		NV_ERROR(dev, "evo pushbuf stalled\n");
 
-	/* enable clock change interrupts. */
-	nv_wr32(dev, 0x610028, 0x00010001);
-	nv_wr32(dev, NV50_PDISPLAY_INTR_EN, (NV50_PDISPLAY_INTR_EN_CLK_UNK10 |
-					     NV50_PDISPLAY_INTR_EN_CLK_UNK20 |
-					     NV50_PDISPLAY_INTR_EN_CLK_UNK40));
-
-	/* enable hotplug interrupts */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		struct nouveau_connector *conn = nouveau_connector(connector);
-
-		if (conn->dcb->gpio_tag == 0xff)
-			continue;
-
-		pgpio->irq_enable(dev, conn->dcb->gpio_tag, true);
-	}
 
 	return 0;
 }
@@ -442,7 +450,6 @@ static int nv50_display_disable(struct drm_device *dev)
 	}
 
 	nv_wr32(dev, NV50_PDISPLAY_CHANNEL_STAT(0), 0);
-	nv_wr32(dev, NV50_PDISPLAY_CTRL_STATE, 0);
 	if (!nv_wait(dev, NV50_PDISPLAY_CHANNEL_STAT(0), 0x1e0000, 0)) {
 		NV_ERROR(dev, "timeout: (0x610200 & 0x1e0000) == 0\n");
 		NV_ERROR(dev, "0x610200 = 0x%08x\n",