ARM: vt8500: Add support for UHCI companion controller

Add support for a generic non-pci UHCI companion controller.
Existing board files for arch-vt8500 updated to include UHCI
support.
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/usb/platform-uhci.txt

+Generic Platform UHCI controllers.
+
+Required properties:
+ - compatible: Should be "platform-uhci".
+ - reg: Address range of the uhci registers
+ - interrupts: Should contain the uhci interrupt.
+
+usb: uhci@D8007301 {
+	compatible = "platform-uhci", "usb-uhci";
+	reg = <0xD8007301 0x200>;
+	interrupts = <0>;
+};

arch/arm/mach-vt8500/bv07.c

@@ -33,6 +33,7 @@ static struct platform_device *devices[] __initdata = {
 	&vt8500_device_uart0,
 	&vt8500_device_lcdc,
 	&vt8500_device_ehci,
+	&vt8500_device_uhci,
 	&vt8500_device_ge_rops,
 	&vt8500_device_pwm,
 	&vt8500_device_pwmbl,

arch/arm/mach-vt8500/devices-vt8500.c

@@ -48,6 +48,11 @@ void __init vt8500_set_resources(void)
 	tmp[1] = wmt_irq_res(IRQ_EHCI);
 	wmt_res_add(&vt8500_device_ehci, tmp, 2);
 
+	/* vt8500 uses a single IRQ for both EHCI and UHCI controllers */
+	tmp[0] = wmt_mmio_res(VT8500_UHCI_BASE, SZ_512);
+	tmp[1] = wmt_irq_res(IRQ_EHCI);
+	wmt_res_add(&vt8500_device_uhci, tmp, 2);
+
 	tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
 	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
 

arch/arm/mach-vt8500/devices-wm8505.c

@@ -55,6 +55,10 @@ void __init wm8505_set_resources(void)
 	tmp[1] = wmt_irq_res(IRQ_EHCI);
 	wmt_res_add(&vt8500_device_ehci, tmp, 2);
 
+	tmp[0] = wmt_mmio_res(WM8505_UHCI_BASE, SZ_512);
+	tmp[1] = wmt_irq_res(IRQ_UHCI);
+	wmt_res_add(&vt8500_device_uhci, tmp, 2);
+
 	tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
 	wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
 

arch/arm/mach-vt8500/devices.c

@@ -204,6 +204,17 @@ struct platform_device vt8500_device_ehci = {
 	},
 };
 
+static u64 uhci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_uhci = {
+	.name		= "platform-uhci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask	= &uhci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
 struct platform_device vt8500_device_ge_rops = {
 	.name		= "wmt_ge_rops",
 	.id		= -1,

arch/arm/mach-vt8500/devices.h

@@ -81,6 +81,7 @@ extern struct platform_device vt8500_device_uart5;
 extern struct platform_device vt8500_device_lcdc;
 extern struct platform_device vt8500_device_wm8505_fb;
 extern struct platform_device vt8500_device_ehci;
+extern struct platform_device vt8500_device_uhci;
 extern struct platform_device vt8500_device_ge_rops;
 extern struct platform_device vt8500_device_pwm;
 extern struct platform_device vt8500_device_pwmbl;

arch/arm/mach-vt8500/wm8505_7in.c

@@ -32,6 +32,7 @@ static void __iomem *pmc_hiber;
 static struct platform_device *devices[] __initdata = {
 	&vt8500_device_uart0,
 	&vt8500_device_ehci,
+	&vt8500_device_uhci,
 	&vt8500_device_wm8505_fb,
 	&vt8500_device_ge_rops,
 	&vt8500_device_pwm,

drivers/usb/host/Kconfig

@@ -450,7 +450,7 @@ config USB_OHCI_LITTLE_ENDIAN
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on USB && (PCI || SPARC_LEON)
+	depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -468,7 +468,15 @@ config USB_UHCI_HCD
 config USB_UHCI_SUPPORT_NON_PCI_HC
 	bool
 	depends on USB_UHCI_HCD
-	default y if SPARC_LEON
+	default y if (SPARC_LEON || ARCH_VT8500)
+
+config USB_UHCI_PLATFORM
+	bool "Generic UHCI Platform Driver support"
+	depends on USB_UHCI_SUPPORT_NON_PCI_HC
+	default y if ARCH_VT8500
+	---help---
+	  Enable support for generic UHCI platform devices that require no
+	  additional configuration.
 
 config USB_UHCI_BIG_ENDIAN_MMIO
 	bool

drivers/usb/host/uhci-hcd.c

@@ -846,6 +846,11 @@ static const char hcd_name[] = "uhci_hcd";
 #define PLATFORM_DRIVER		uhci_grlib_driver
 #endif
 
+#ifdef CONFIG_USB_UHCI_PLATFORM
+#include "uhci-platform.c"
+#define PLATFORM_DRIVER		uhci_platform_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
 #error "missing bus glue for uhci-hcd"
 #endif

drivers/usb/host/uhci-platform.c

+/*
+ * Generic UHCI HCD (Host Controller Driver) for Platform Devices
+ *
+ * Copyright (c) 2011 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This file is based on uhci-grlib.c
+ * (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static int uhci_platform_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	uhci->rh_numports = uhci_count_ports(hcd);
+
+	/* Set up pointers to to generic functions */
+	uhci->reset_hc = uhci_generic_reset_hc;
+	uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+
+	/* No special actions need to be taken for the functions below */
+	uhci->configure_hc = NULL;
+	uhci->resume_detect_interrupts_are_broken = NULL;
+	uhci->global_suspend_mode_is_broken = NULL;
+
+	/* Reset if the controller isn't already safely quiescent. */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+static const struct hc_driver uhci_platform_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"Generic UHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =			uhci_irq,
+	.flags =		HCD_MEMORY | HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =		uhci_platform_init,
+	.start =		uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =		NULL,
+	.pci_resume =		NULL,
+	.bus_suspend =		uhci_rh_suspend,
+	.bus_resume =		uhci_rh_resume,
+#endif
+	.stop =			uhci_stop,
+
+	.urb_enqueue =		uhci_urb_enqueue,
+	.urb_dequeue =		uhci_urb_dequeue,
+
+	.endpoint_disable =	uhci_hcd_endpoint_disable,
+	.get_frame_number =	uhci_hcd_get_frame_number,
+
+	.hub_status_data =	uhci_hub_status_data,
+	.hub_control =		uhci_hub_control,
+};
+
+
+static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct uhci_hcd	*uhci;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
+			pdev->name);
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_err("%s: request_mem_region failed\n", __func__);
+		ret = -EBUSY;
+		goto err_rmr;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_err("%s: ioremap failed\n", __func__);
+		ret = -ENOMEM;
+		goto err_irq;
+	}
+	uhci = hcd_to_uhci(hcd);
+
+	uhci->regs = hcd->regs;
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED |
+								IRQF_SHARED);
+	if (ret)
+		goto err_uhci;
+
+	return 0;
+
+err_uhci:
+	iounmap(hcd->regs);
+err_irq:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static int uhci_hcd_platform_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_platform_shutdown(struct platform_device *op)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id platform_uhci_ids[] = {
+	{ .compatible = "platform-uhci", },
+	{}
+};
+
+static struct platform_driver uhci_platform_driver = {
+	.probe		= uhci_hcd_platform_probe,
+	.remove		= uhci_hcd_platform_remove,
+	.shutdown	= uhci_hcd_platform_shutdown,
+	.driver = {
+		.name = "platform-uhci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(platform_uhci_ids),
+	},
+};